Quick Change Magnetic Nut Setter Bits SAE and Metric (10 Piece Set)
- Includes most common mm and sae sizes 6mm, 7mm, 8mm, 10mm, 12mm, 1/4″, 5/16″, 3/8″, 7/16″ and 1/2″. 1/4″ hex shank. Precision milled. Quick change bits fit most power corded and cordless drills. Sandblasted, heat treated hardened chrome-vanadium steel.
7/16″ x 6″ Magnetic Nut Setter – Impact Rated – Black Oxide
- All oem tool insert bits are tempered with our exclusive hch long life heat treatment process. Our impact torsion product line-up works will all cordless impact drivers as well as standard cordless drills. The “geometric torsion zone” features a patented designed that absorbs sudden impacts. The computer ground tip provides and exact fit into screw head, the maximum contact helps eliminate stripping. Oem tools direct impact torsion drive bits are engineered for long and durability.
HTS 122N9 9/16″ Impact Ready Magnetic Nut Setter Bit, 2.5″ Long
- The 2. The industry standard 1/4″ hex shank on each bit features a “cut-out” section so they are impact driver ready. The internally mounted magnet holds nuts during use, allowing the user to thread a nut with a single hand without fear of dropping it. 5″ nut setter bits from hobby tool supply turn any standard drill into a nut driver. Made from chrome vanadium steel, the bits are corrosion resistant.
12 ~ 2-9/16″ IMPACT LASER ETCHED MAGNETIC ~ 1/4″ ~ NUTSETTER NUT DRIVER SETTERS
- Lot of ~ 12 ~ impact magnetic nut setterlength 2-9/16″size 1/4″laser etched size markings for quick and easy identificatiexported by exportyourstore.
10 Goliath Industrial Laser Etched 9/16″ Impact Magnetic Nut Setters IMNS916
- We will replace any nut setters should there be a defect in the strength of the metal but will not replace any where the magnets have been knocked out from impact guns. The only way to prevent this and prolong the life of the nut setter is to use these in a cordless drill. 10 brand new impact magnetic nut settersthis is a bulk lot meaning all the nut setters are the same sizelength 2-9/16″shank size 1/4″ hexsocket end size 9/16″laser etched size markings for quick and easy identification1/4 rapid load quick change hex shank fits all drills and power driversall though these are made tough to be used with cordless impact drivers please be aware that no magnet in any nut setter is designed for impact use so when you use a nut setter with a impact gun at some point the magnet will get knocked out from the constant slapping that occurs between the magnet and the fastener.
Hilti Non-Magnetic Nut Setter for 3/8″ Nuts – 2039250 – 1-15/16″ Long
- Ball-notch screw retention. Non-magnetic nut setter for 3/8″ nuts. Remains clear of metal filings.
6pc IMPACT READY 6″ MAGNETIC NUTSETTER 1/4 5/16 3/8 7/16 1/2 9/16 DRIVER NUT SET
- 6pc impact magnetic nut setter setlength 6 sizes include 1/4 5/16 3/8 7/16 1/2 9/16 laser etched size markings for quick and easy identificatiexported by exportyourstore.
Eazypower 00324 1/4-Inch Magnetic Nut Setter 1-5/8-Inch Long, 50 Pack
- Plastic tub with cap safely stores all your eazypower bits for use when you need them. Machined from high quality chrome vanadium molybdenum tool steel. Isomax a contractor quality. Works in all cordless drills with eazyload quick disconnect bit holders and quick change chucks. 1-5/8″ overall length. Ideal for a variety of applications. Available in a displayed 50 pieces in tub.
Domeiki 5pc Magnetic Nut Setter Master 1/4″ x 6″ inch Contractor Grade Tools Quick
- Product detailed data refer to product description. Customer satisfaction is our goal. Any return must be in the same condition it was delivered, new & unused, and in the original packaging all return costs are the responsibility of the buyer if an item was damaged during shipping, we may require photos to help expedite the return process it may just be a matter of sending out a replacement part. Domeiki specializes in providing quality tools at affordable prices everything we sell ships right here from our los angeles warehouse.
3/8″ x 6″ Magnetic Nut Setter – Impact Rated – 3 Pack
- We use strong permanent magnets design for hexagon headed bolts, screws and nuts. . Made from high strength tool steel, they transfer high torque loads safely and efficiently. Oem magnetic nutdrivers are manufactured for trade and industrial applications. The hex shank / power groove shank fits in all standard keyless chucks and cordless electric impact drivers.
Hilti Magnetic Nut Setter for 3/8″ Nuts – 2039233 – 2-9/16″ Long
- Rare-earth magnet to keep fasteners firmly in place. Specially manufactured for use with impact drivers. Magnetic nut setter for 3/8″ nuts. Drives fasteners on the side instead of on the corners, reducing breakage and stripping. Manufactured from a cold-forged high-grade steel and coated with corrosion-resistant black oxide.
Vermont American 15118 3 Piece 1/4-Inch Hex Shank Magnetic Nut Setter Set with 1/4-Inch, 5/16-Inch and 3/8-Inch Nutsetters
- Universal 1/4″ hex shank with power groove. Ideal for fast, easy driving of nuts, bolts and hex head screws rugged single-piece construction provides long life under constant use the precision formed tip ensures a proper fit. Magnetic shaft holds fastener securely.
“ABC Products” – (New – Stronger Magnet Holder) – 9 Piece – Metric Magnetic Nut setter Set – With Quick Release – (Set Includes: Sizes: 5mm, 5.5mm 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, and 12mm)
- 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm quick release 1/4 in. Sizes 5mm, 5. The lobular drive prevents rounding by putting torque on fastener sides, not the corners. These super-strong magnetized nutsetters are designed to stand up to use with impact tools. These nutsetters have magnetic shafts to hold fasteners securely. Hex shanks lobular drive prevents rounding by putting torque on the sides, not the corners overall length 2 in.
Irwin Tools HAN94832 Gold Tone Magnetic Nut Setter (2 9/16 in (OAL), 5/16 in Hex Drive) (Non-Carb Compliant)
- For use with sheet metal screws. The product is irwin gold tone magnetic nut setter, 2 9/16 in (oal), 5/16 in hex drive. Gold oxide finish. Shank size 1/4″.
4 pack – 6″ Magnetic Nut Setters – Black Oxide Impact Rated – 1/4, 5/16, 3/8, 7/16
- Oem tools direct impact torsion drive bits are engineered for long and durability. Our impact torsion product line-up works will all cordless impact drivers as well as standard cordless drills. The “geometric torsion zone” features a patented designed that absorbs sudden impacts. All oem tool insert bits are tempered with our exclusive hch long life heat treatment process. The computer ground tip provides and exact fit into screw head, the maximum contact helps eliminate stripping.
7/16″x 6″ Magnetic Nut Setter – Black Oxide – Impact Rated – 3 Pack
- . Made from high strength tool steel, they transfer high torque loads safely and efficiently. We use strong permanent magnets design for hexagon headed bolts, screws and nuts. The hex shank / power groove shank fits in all standard keyless chucks and cordless electric impact drivers. Oem magnetic nutdrivers are manufactured for trade and industrial applications.
Stanley Proto J61652 Magnetic Nut Setter, 1/4-Inch Hex by 1/2-Inch Socket
- Stanley j61652 proto magnetic nut setter, 1/4-inch hex x 1/2-inch socket magnets feature enhanced holding power to help improve fastener retention, helping to increase productivity. Nut setter 1/4-inch hex drive size 1/2-inch socket body dia. .
Shop-Tek 3-Pack Magnetic Nut Setter, 5/16″ x 6″ OAL on 1/4″ Hex Drive
- Natural tumbled finish. . Exact fit precision formed. High performance permanent magnets. Made from high quality tool steel. Nut setter power bit 3-piece x 6″ long. On standard 1/4″ hex drive shank.
5/16″ x 6″ Magnetic Nut Setter – Black Oxide – Impact Rated – 3 Pack
- Oem magnetic nutdrivers are manufactured for trade and industrial applications. The hex shank / power groove shank fits in all standard keyless chucks and cordless electric impact drivers. Made from high strength tool steel, they transfer high torque loads safely and efficiently. We use strong permanent magnets design for hexagon headed bolts, screws and nuts.
3/8″ x 6″ Magnetic Nut Setter – Impact Rated – Black Oxide
- Our impact torsion product line-up works will all cordless impact drivers as well as standard cordless drills. All oem tool insert bits are tempered with our exclusive hch long life heat treatment process. Oem tools direct impact torsion drive bits are engineered for long and durability. The “geometric torsion zone” features a patented designed that absorbs sudden impacts. The computer ground tip provides and exact fit into screw head, the maximum contact helps eliminate stripping.
VEGA Industries P165MN516 Professional Grade Impactech Impact Ready Magnetic Nut Setters, 5/16″ x 2-9/16″
- Tested to outperform all leading brands in lifecycle and tip failure testing. Made from s2 modified shock resistant steel for professional performance and durability. Proprietary precision cnc machined tips for excellent fit in fastener recess. Patented spiral torsion zone absorbs impact and extends bit life.
Wiha 70492 Nut Setter Magnetic 3 Piece Set 1/4, 5/16 & 3/8 x 6” OAL on 1/4″ Hex Drive
- Made from high quality tool steel. Exact fit precision formed. Nutsetter power bit 3pc set 1/4, 5/16, 3/8 x 6″ long. Natural tumbled finish. High performance permanent magnets. On standard 1/4″ hex drive shank.
Neiko Pro-Grade 5-Piece Hex-Shank Magnetic Power Nut Setters – SAE
- Makes setting small nuts and bolts a snap with super-handy magnetic nut setters. Powerful magnet holds nut or bolt firmly in setter, lets you set one-handed in hard-to-reach areas. Hex-shank design allows you to quickly change sizes, provide sure grip in any chuck. 5 hard-to-find larger sae sizes 1/4, 5/16, 3/8, 7/16 and 1/2″ 1/4″ shank.
8mm 5/16″ Socket Magnetic Nut Driver Setter Adapter Hex Drill Bit 5pcs
- Product name magnetic nut settermaterial chrome vanadium steel. Weight 162g. Color gray. Package content 5pcs x magnetic nut setter. Hex size socket 8mm / 5/16″shank 6mm / 1/4″overall size 66 x 13mm / 26″ x 05″ (lmaxd).
Extra-Long Super-Power Magnetic Nut Setter 5/16″ x 6″ – Quick-Change Shank – Extra-Strong Magnet – Taiwan
- Super-power magnet holds nut firm, no more dropped pieces excellent quality, made in taiwan. Chrome-vanadium steel alloy for superior durability rust resistant sand blasted finish. Extended-reach 6″ magnetic nut setter for more efficient install of 5/16″ nuts and bolts. Quick-change 1/4″ hex shank bits drill chucks, impact drivers, extensions & bit holders. Sold individually, order any quantity 24 oz each, other sizes/lengths available.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
