24 Greatest Drawer Slides

 

Liberty D68822C-W-TS 22-Inch Bottom Mount Drawer Slide - European self-closing bottom mount. 100-pound load capacity. Easy to follow instructions and mounting hardware included.

 

uxcel a12062700ux0356 2 Pcs 10-Inch 3-fold Full Extension Ball Bearing Drawer Slides - Unstretched size 25 x 38 x 12cm/ 10″ x 15″ x 05″(lwt)the third track width 2cm/ 079″. Mounting hole diameter 048cm / 019″full length 50cm / 197″. Material cold-rolled steel with steel ball bearings, plasticcolor silver tone. Product name ball bearing drawer slidesfeature 3-fold smooth telescopic slide. Net weight 378gpackage content 2 x ball bearing drawer slides.

 

Blum 563F5330B TANDEM Plus BLUMOTION Full Extension Concealed Drawer Slides for, Zinc Plated - Static load capacity works with panel or blocked-out face frame cabinets includes blumotion soft-close function 21″ drawer slides are standard length for 24″ depth cabinets for 3/4″ max. The first time you open and close a fully loaded blum-equipped drawer, you’ll quickly realize that tandem is a runner system that is unmatched in quality, style and running action. It’s design has been adapted to be used in a variety of different hinge and drawer slide systems making it a system you can count on in any application within your home. Features four-dimensional adjustments elongated hole provide depth adjustments 100 lb. Specifications length 21″ extension 21″ (measured from the cabinet surface to the end of the extended drawer) weight capacity 66 lbs minimum cabinet depth 21-7/8″ soft close yes mounting type concealed undermount material steeladditional sizes 563f2290b10 9″ 563f3050b 12″ 563f3810b 15″ 563f4570b 18″ 563f5330b (this model) 21″. Blumotion blum’s patented soft-closing technology is an industry standard, having found its way into the homes, garages and offices of customers all across the country. Drawer side thickness product technologies tandem blum’s tandem technology is a culmination of all the features, engineering innovations and end-user benefits that blum has developed since it’s inception.

 

GlideRite Hardware 1670-ZC – 16-inch 100 Lb. Full Extension Ball Bearing Drawer Slides with 1″ Over-travel (10 Pairs) - Lever disconnect for easy drawer removal. Side mounted, non handed design, positive stop, with common 32mm hole pattern. 10-pairs 100 lb gliderite hardware 70 series full extension slides with 1″ over-travel. Steel ball-bearing action slides that are remarkably smooth and quiet. Length 16″ (400mm), available in sizes 10″ to 28″ (250mm to 700mm).

 

10 Pack Promark Full Extension Drawer Slide 14″ 100lb Load Rating - Note from seller we rely upon representations and labelling made by our suppliers at the time of our order of products or components from that supplier as to the composition of the products (and components of products) we purchase from them, without independent verification of those representations and labelling. . � Notwithstanding any other provision of any document, agreement, marketing information, packaging or communication to the contrary, and without limiting the disclaimer and limitation of liability set out above, we make no warranty (and we assume and shall have no responsibility) to our customers arising from our description of any product made in reliance upon such representations or labelling by our suppliers.

 

Rockler Universal Drawer Slide Jig - The jig can be clamped in place if desired, and it also features an adjustable rod that references off of the face frame rails or cabinet bottom for fast, repeatable height settings. The rockler universal drawer slide jig is the ultimate aid for installing drawer slides of almost any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides the jig features a locking wedge that holds the slide securely with no risk of slippage. Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback. Features sliding wedge locks slide securely into the jig adjustable indexing foot allows perfect repeatability foot can be rotated for use on top or bottom cutouts in jig allow access for drill and driver bits large clamping area so jig can be clamped in place durable foamed nylon body with steel indexing rod and abs foot indexing rod is stored onboard when not in use not compatible with blum tandem drawer slides.

 

Bundle – 21″ BLUM TANDEM Drawer Slides with BLUMOTION. Includes Slides 563H, Locking Devices, Rear Mounting Brackets, Screws and Instructions. - For installation on both face frame or frameless cabinet drawers fully concealed drawer slides are full extension designed for drawers that are 1/2″ to 5/8″ thick. Tandem plus blumotion is mounted discreetly beneath the drawer and has the quietest opening and closing action available. This is just one example of blums commitment to manufacturing in the us, for the us. Tandem plus blumotion concealed runners are made in the usa at blums north carolina facility. 1901 locking devices, 2 rear mounting brackets 295. Everything you need. With tandem plus blumotion concealed runners, customers only see the beauty of the wood drawers while experiencing the quality of motion and soft closing they have come to expect from blum products. Package include 1 pair of slides, 1 pair t51. Blums newest generation of tandem plus blumotion concealed drawer runners offers four-dimensional adjustment, elongated holes for depth adjustment, bottom mount holes and exceptional load capacity (100 lb. 3750, 4 screws for mounting locking devices, 4 screws for rear brackets, and screws for mounting slides (6 of each standard screws and 5mm system screws). Static load). Packaged in pairs with side adjustable locking device, rear mounting brackets, screws and instructions. This top-of-the-line concealed runner is the industry choice for dovetail drawers in high-end cabinetry, in either face frame or panel.

 

Prime-Line Products R 7212 Drawer Slide Kit, 19-3/4 in., Steel Tracks, White Powder Coat - From the end of the 19-3/4 in. On left and right sides, 1/4 in. These tracks feature a self-closing design that commences at the final 2-1/2 in. The clearance required between the drawer and the drawer opening for these types of slides is as follows 1/2 in. At the top. Installation instructions are included with each set, and they can also be found within the manufacturer’s website. This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. The maximum load capacity for this kit is 75 lbs. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. At the bottom and 5/8 in. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. If installing in drawer cabinet with face frame, prime-line’s model number r-7240 (purchased separately) may be necessary if existing back plates are damaged. Diameter wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. Long tracks when closing. , And it fits most bottom/side-mounted drawer systems.

 

Knape & Vogt 8400P 22 Side Mount Full Extension Drawer Slide, 22-Inch, Pair - Designed for use on box or file drawer applications up to 24-inches wide. 8400 is an unhanded design with traditional and 32mm hole patterns that supports industry standards. 100 lb. Class full extension drawer slide features an ergonomically designed push-in lever release for easy drawer removal. The reversed flex tabs allow improved slide performance with side clearance tolerance adjustments.

 

Prime-Line Products R 7210 Drawer Slide Kit, 15-3/4 in., Steel Tracks, White Powder Coat - This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. At the bottom and 5/8 in. Long tracks when closing. The maximum load capacity for this kit is 75 lbs. On left and right sides, 1/4 in. If installing in drawer cabinet with face frame, prime-line’s model number r-7240 (purchased separately) may be necessary if existing back plates are damaged. Installation instructions are included with each set, and they can also be found within the manufacturer’s website. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. Diameter wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These tracks feature a self-closing design that commences at the final 2-1/2 in. , And it fits most bottom/side-mounted drawer systems. At the top. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. The clearance required between the drawer and the drawer opening for these types of slides is as follows 1/2 in. From the end of the 15-3/4 in.

 

Drawer Slide, Full Extension, 22 in., Heavy Duty, 500 lb. Capacity, Zinc - Screws not included.   Price is per pair. Chromated steel. @ 75,000 cycles. Screw length will vary depending on application. Cabinet member requires #10 flat head countersunk screw. @ 10,000 cycles, 280 lbs. Tested weight capacity 430 lbs. Capacity, with cushioned in and out stops. The hettich ka3320 22″ drawer slides are a heavy duty, telescoping, precision, full extension drawer slides for high loads, up to 500 lb.   The runner and ball race form a single non-detachable unit. Use all screw holes to acheive full load rating. Smooth action and high side stability through precision slide. Features & specifications of hettich, 03320-022-44, 22″ drawer slides, heavy duty, full extension. Drawer member requires #10 pan head screw.   3/4″ installation width, 3″ height.   Manufactured by hettich america, in buford, ga, usa. Ball spacers made of noise-absorbing plastic with hardened steel balls.

 

21″ Soft Close, Under-mount, Full Extension drawer slide, 85 lb capacity - 85 lb load capacity. Includes front fixing clips. For use with 1/2″ and 5/8″ drawer boxes. Soft close.

 

Rok Hardware Magnetic Drawer Slide Mounting Kit (Includes Tool and Brackets) - Rok® brand is sold exclusively by rok hardware when you purchase a rok® brand product,. Flat surface allows for clamping built-in magnets keep drawer slide in place. Easily aligns cabinet drawer boxes to the drawer slides. Your satisfaction is guaranteed the rok® name is a registered trademark of rok, inc. Made for face frame and frameless cabinets works for low profile epoxy (roller) slides and side mounted ball bearing slides.

 

Pack of 10 Pairs (24 Inches Full Extension Drawer Slides)(LSI) - Ball bearing sliding system. Packed in master packs of 10 pairs with screws included. Made of steel. Built in rubber detent to keep drawer in the closed position. Side mounted installation type.

 

Liberty D66322C-W-TS 22-Inch Side Mount Drawer Slide - 50-pound load capacity. European side mount. Easy to follow instructions and mounting hardware included.

 

10 Pack Promark Full Extension Drawer Slide 22″ 100lb Load Rating - . � Notwithstanding any other provision of any document, agreement, marketing information, packaging or communication to the contrary, and without limiting the disclaimer and limitation of liability set out above, we make no warranty (and we assume and shall have no responsibility) to our customers arising from our description of any product made in reliance upon such representations or labelling by our suppliers. Note from seller we rely upon representations and labelling made by our suppliers at the time of our order of products or components from that supplier as to the composition of the products (and components of products) we purchase from them, without independent verification of those representations and labelling.

 

Liberty D80616C-ZP-W 16-Inch Ball Bearing Drawer Slides - Zinc plated finish. 16-inch full extension. 1 pair per package.

 

SK70 – Pack of 10-pairs – Face Frame Rear Mounting Brackets for Drawer Slides - 5mm full extension drawer slides although they should also fit other high quality full extension drawer slides brands. These brackets are designed to fit both gliderite and topslide 45. Pack of 10-pairs rear mounting face frame brackets. Only use these brackets for face frame installation.

 

10 Pack Promark Full Extension Drawer Slide 18″ 100lb Load Rating - . � Notwithstanding any other provision of any document, agreement, marketing information, packaging or communication to the contrary, and without limiting the disclaimer and limitation of liability set out above, we make no warranty (and we assume and shall have no responsibility) to our customers arising from our description of any product made in reliance upon such representations or labelling by our suppliers. Note from seller we rely upon representations and labelling made by our suppliers at the time of our order of products or components from that supplier as to the composition of the products (and components of products) we purchase from them, without independent verification of those representations and labelling.

 

10 Pack Promark Full Extension Drawer Slide 20″ 100lb Load Rating - . Note from seller we rely upon representations and labelling made by our suppliers at the time of our order of products or components from that supplier as to the composition of the products (and components of products) we purchase from them, without independent verification of those representations and labelling. � Notwithstanding any other provision of any document, agreement, marketing information, packaging or communication to the contrary, and without limiting the disclaimer and limitation of liability set out above, we make no warranty (and we assume and shall have no responsibility) to our customers arising from our description of any product made in reliance upon such representations or labelling by our suppliers.

 

GlideRite Hardware 1070-Z – 10-inch 100 Lb. Full Extension Ball Bearing Drawer Slides with 1″ Over-travel - Length 10″ (250mm), alvailable in sizes 10″ to 28″ (250mm to 700mm). Side mounted, non-handed design, positive stop, with common 32mm hole pattern. Steel ball-bearing action slides that are remarkably smooth and quiet. Lever disconnect for easy drawer removal. One pair 100 lb gliderite hardware 70 series full extension slides.

 

Classic Wood Center Mount Drawer Slide - A high-tech kiln drying method eliminates warpage ensuring a quality product. Made from beech or maple hardwood. 22” length 3/4” thick when both slide parts are assembled. Slide parts interlock preventing drawers from tipping fully extended. Slides are 22” long but can be cut to length if needed. Slide comes undrilled, allowing for customization. These classic drawer slides can be adapted to fit most applications. Cabinet part is usually 1/2″ longer than drawer part both included.

 

Accuride C 3832-C22P 3832 Series – 22″ Full Extension Drawer Slide – 1 Pair - 22″ accuride full extension ball bearing drawer slides. Included 1 pair, weight 40 pounds, size specs 22″l x 05″w x 18″h, finish zinc. Cam drawer adjust, lever disconnect, easy access to 32mm & traditional hole pattern. 100 lb full ext steel ball bearing slide, hold-in detent prevents drawer roll-out & bounce-back. You will receive 1 pair drawer slides for the price listed, limited lifetime warranty.

 

Blum Locking Device For Overlay Tandem Drawer Slides (2 Pairs) - Included in each component is a built-in height adjustment wedge, that allows for easy adjustment of the drawer front. Both a left and a right device is needed for the installation and that’s what’s included here. Available in several size variations for your convenience and savings. An essential part of the tandem slide systemthese locking devices by blum, serve to connect the slide to the drawer.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.