24 Best Bessey Clamps

 

Bessey 5-1XXX Edge Clamp #ad

Bessey 5-1XXX Edge Clamp

Bessey 5-1XXX Edge Clamp #ad - Used with bessey tradesmen clamps and other bar clamps, this edge clamp can be mounted anywhere on the bar to provide added clamping power. Item is manufactured in germany. High strength roll formed threaded spidnle threads. This product is easy to use easy to install and highly durable. Locking knob for attachment to bar clamp rail included. Wood handle.

 

Bessey K-Body REVO Fixed Jaw Parallel Clamp 40 #ad

Bessey K-Body REVO Fixed Jaw Parallel Clamp, 40″

Bessey K-Body REVO Fixed Jaw Parallel Clamp, 40″ #ad - This 40″ fixed jaw parallel clamp features a large, flat parallel clamping surface made of impact and break resistant polyamide that comes with three replaceable pressure caps that are glue, paint and grease resistant. The internal frame ensures accurate 90-degree angles which are very sturdy even at maximum pressures. Rail protection pieces made of same glue resistant polyamide elevate the workpiece from the rail, and the removable end rail clip ensures that the clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader. . A large, comfortable two-component composite handle with a soft plastic insert makes a comfortable grip.

 

Bessey BTB30 Tradesman 30-Piece Bar Clamp Assortment #ad

Bessey BTB30 Tradesman 30-Piece Bar Clamp Assortment

Bessey BTB30 Tradesman 30-Piece Bar Clamp Assortment #ad - 3835 pounds limited lifetime warranty. Profile rail i-beam minimizes bending non-slip locking device. Profiled steel and zinc-finished rail prevents black marks on wood plastic caps wood handles. Includes (4) 6-inch, (6) 12-inch, (4) 18-inch, (8) 24-inch, (4) 30-inch, (4) 36-inch clamps rack not included. 30-piece assorted bar clamp set ideal for frameless construction, cabinets, and more rack not included.

 

Bessey GSCC2536 25-Inch x 36-Inch Economy Clutch Style Bar Clamp #ad

Bessey GSCC2.536 2.5-Inch x 36-Inch Economy Clutch Style Bar Clamp

Bessey GSCC2.536 2.5-Inch x 36-Inch Economy Clutch Style Bar Clamp #ad - Powder-coated finish. Medium duty clamp. Cast heads. 36″ clutch bar clamp. Durable powder coated cast iron fixed & sliding jaws. 2 piece clutch plate system. Suitable for a wide range of woodworking & diy projects. Nickel plated. Zinc finish rail. Protective pads for both top and bottom jaws.

 

two2 each 3-D Cabinet Assembly Setup Squares plus four4 each Bessey clamps #ad

two(2) each 3-D Cabinet Assembly Setup Squares plus four(4) each Bessey clamps

two(2) each 3-D Cabinet Assembly Setup Squares plus four(4) each Bessey clamps #ad - Ensures accurate & reliable square cabinet sections. Its sections are made of 3/16″ thick rolled aluminum, which are cnc machined to within 0002″ at the end of the 6″ legs. This is greater accuracy than an engineer’s square. Made in the united states. The bessey clamps are great for this and many other operations in the work shop.

 

Bessey Clamp welding F-style replaceable swivel pad 12 In x 4 In 726 lb 660-S12 #ad

Bessey Clamp, welding, F-style, replaceable swivel pad, 12 In. x 4 In., 726 lb (660-S12)

Bessey Clamp, welding, F-style, replaceable swivel pad, 12 In. x 4 In., 726 lb (660-S12) #ad - 90 degree corner clamp. Independently adjustable spindles allow for joining of 2 differently sized work piece. Jaw width 1625. Dowel or staple material together while gluing. Open design allows ample clearance to screw.

 

Bessey EKT55 One-Handed Edge Clamp #ad

Bessey EKT55 One-Handed Edge Clamp

Bessey EKT55 One-Handed Edge Clamp #ad - Clamps surfaces up to 2-1/8″ thick. Clamp panels from 3/8 inch to 2 inch. Pressure pads use soft plastic caps for gentle, no-slip clamping. Features a compound screw mechanism. Max 450-500 lbs of pressure. No harm to clamped surfaces. Prevents materials from slipping. Provides secure hold while realignment.

 

Bessey KRK2450 K Body REVO Fixed Jaw Parallel Clamp Kit Includes 2-24-inch 2-50-inch K Body Clamps and 1 set of KP Blocks #ad

Bessey KRK2450 K Body REVO Fixed Jaw Parallel Clamp Kit Includes: 2-24-inch, 2-50-inch K Body Clamps and 1 set of KP Blocks

Bessey KRK2450 K Body REVO Fixed Jaw Parallel Clamp Kit Includes: 2-24-inch, 2-50-inch K Body Clamps and 1 set of KP Blocks #ad - Powder coat finish on frame. Alloy cast frame. Fixed jaw includes 2 clamping surfaces to distribute force over broader area. Zinc plated handle and threaded spindle. The new k body revo clamp from bessey achieves a powerful 7,000 n clamping force, some 2,000 n more than usual. The new k body revo clamp range from bessey offers some 30% more clamping force. The vario k body revo clamp enables the head to be adjusted at the press of a button. Soft non-marring jaw pads included for fixed jaws and spindle pad.

 

Bessey GSCC2524 25-Inch x 24-Inch Economy Clutch Style Bar Clamp #ad

Bessey GSCC2.524 2.5-Inch x 24-Inch Economy Clutch Style Bar Clamp

Bessey GSCC2.524 2.5-Inch x 24-Inch Economy Clutch Style Bar Clamp #ad - 24″, clutch style, bar clamp, medium duty clamp, suitable for a wide range of woodworking & diy projects, durable powder coated cast iron fixed & sliding jaws, nickel plated, drawn & serrated rail, 2 piece clutch plates for easy positioning, non-marring protective pads, ergonomically shaped wood handle, 24″ clamping capacity, 2-1/2″ throat depth, 600 lb clamping force. .

 

Bessey LC-8 8-Inch Rapid Action Lever Clamp #ad

Bessey LC-8 8-Inch Rapid Action Lever Clamp

Bessey LC-8 8-Inch Rapid Action Lever Clamp #ad - Ratchet mechanism for precise, vibration-proof clamping. Powder coated clamping lever ergonomically shaped for comfort and leverage. Available in sizes from 4″ to 12″ and clamping pressure from 400 lbs to 1,110 lbs. Perfect for high-volume production. Ideal for multiple clamp applications for quick and easy set-up and take downs.

 

Regular Duty Professional Series All Steel Sliding Arm F Style Bar Clamp With Ergonomic Bessey Grip #ad

Regular Duty Professional Series All Steel Sliding Arm F Style Bar Clamp With Ergonomic Bessey Grip

Regular Duty Professional Series All Steel Sliding Arm F Style Bar Clamp With Ergonomic Bessey Grip #ad - -Greater reach eliminates need to purchase regular and deep throat clampsreplaceable patented morpad tilts 35° unlike standard ””c”” clamp pad that can ””pop off”” at 20°can draw together up to 1/2”” steel plate. . -Bessey® is the only clamp manufacturer in the world to have earned the iso 9001 quality certification. Jmc2400s-20bglg features -. -Clamps clamps mro plant maintenance clamp. . Instant clamping at any opening extra heavy-duty clamps available. This is your guarantee of continued high quality and service. Disclaimer -warning improper use can cause severe personal injury or property damage. -Regular-dutyeasy-to-use, just slide movable arm into position and tighten screw spindle. -Unspc code 27112100. Save 90% of clamping time versus the ordinary c-clamp. Instant clamping at any openingno wasted setup time. -20in sliding arm clamp reg duty. -With morpad and bessey clamp.

 

Bessey Clutch Clamp Set 6-piece GSCC6PK 6 In #ad

Bessey Clutch Clamp Set (6-piece) GSCC6PK (6 In.)

Bessey Clutch Clamp Set (6-piece) GSCC6PK (6 In.) #ad - Holds workpieces at a 90 degree angle. Bessey clutch clamp set (6-piece) gscc6pk (6 in). Made of spheroidal cast iron for use as a heavy duty welder’s vise. Two-way swivel mounted spindle automatically adjusts the clamping block to workpieces of different thicknesses. Ideal for plates, angle iron, square tubing, pipe, channel iron, etc.

 

Bessey LM2004 LM General Purpose Clamp #ad

Bessey LM2.004 LM General Purpose Clamp

Bessey LM2.004 LM General Purpose Clamp #ad - Replaces c-clamps. Ergonomic wood grip handle. Item is manufactured in china. Designed for light-duty work, this 4″ bar clamp is ideal for gluing, hold down work, and general purpose clamping. This product is easy to use easy to install and highly durable. Lifetime warranty against defects and workmanship. Lighter duty clamp for delicate projects. Protective cap prevents damage to material.

 

Bessey 3101180 Clamp Service Part Tgj25 Replacement Swivel Pad 4-Pack #ad

Bessey 3101180 Clamp Service Part Tgj2.5 Replacement Swivel Pad, 4-Pack

Bessey 3101180 Clamp Service Part Tgj2.5 Replacement Swivel Pad, 4-Pack #ad - 5 series, gs16k and gs12-8k clamps for replacing worn pressure pads. Pads are designed with an integral snap ring on the interior of the pad that secures to the pad to the ball end of the threaded spindle. To install simply seat the new pad onto the spindle, close the clamp, tighten and you will hear the snap of the pad as it secures to the ball end of the spindle. 393 ball end diameter. Pads fit listed bessey models and some competitors clamp spindles with a 0. 4-piece set of steel pressure pads for bessey tgj2.

 

Bessey B-Ec3 3-Way Edge Clamp #ad

Bessey B-Ec3 3-Way Edge Clamp

Bessey B-Ec3 3-Way Edge Clamp #ad - Light duty, 3-way, edge clamp, strong drop forged c-frame, 3 spindles make tool versatile, all steel construction makes it suitable for welding applications, great for precision placement of overhanging edge treatments, each spindle can be individually adjusted for exact spacing, 2-1/2″ clamping capacity, 2-1/2″ throat depth, 300 lb, clamping force, approximate weight 95 lb. .

 

Bessey TK-6 Table Clamp #ad

Bessey TK-6 Table Clamp

Bessey TK-6 Table Clamp #ad - Sold in pairs. Use these clamps to mount the ws series angle clamps to a work table.

 

Bessey XM5 Spring Clamp #ad

Bessey XM5 Spring Clamp

Bessey XM5 Spring Clamp #ad - Heavy duty springs for a firm hold. Locks into projects with firm grip. 2-1/4″ throat depth. Spring is manufactured from tempered spring steel. 2 -1/4-inch opening capacity. Vinyl pads on handles and tips. Nickel plated steel. Vinyl tips & handles. 2-inch throat depth.

 

Bessey WS-3 Angle Clamp #ad

Bessey WS-3 Angle Clamp

Bessey WS-3 Angle Clamp #ad - Used in many applications including cabinet work, furniture assembly, and framing, these unique and versatile clamps are designed to hold, fix, and align material at 90 degrees. The jaws are die-cast and plastic-coated with a rear jaw that swivels allowing you to hold different material thicknesses–always at a 90-degree angle, leaving ample clearance to screw, dowel, or staple material together while gluing. .

 

Bessey CDS24-12WP 12-Inch Throat x 24-Inch Opening Heavy Duty Tradesmen Bar Clamp #ad

Bessey CDS24-12WP 12-Inch Throat x 24-Inch Opening Heavy Duty Tradesmen Bar Clamp

Bessey CDS24-12WP 12-Inch Throat x 24-Inch Opening Heavy Duty Tradesmen Bar Clamp #ad - The smooth running spindle with acme thread allows for more clamping with less effort. Bessel cds 24-12wp 12-inch deep reach malleable cast bar clamp part # cds 24-12wp deep reach cds with flat rail clamp offers the additional reach you need. Maximum safety is available with the integrated anti-slip system. The high quality profiled rail from bessey-feets own german steel plant has been optimized for clamps. A set screw that is molded into the sliding arm interlocks with the serration on the rail to prevent the clamp from slipping. Comes with flat rail profile, standard pad and plastic cap. It offers a throat depth of up to 20-inch when you need that extra deep reach. Bessel cds 24-12wp features throat depth (inches) 12-inch clamping capacity (inches) 24-inch clamping force (pounds) 1550-pound. The profile acts as a reliable reinforcement against torsional forces, while the serration on six faces additional prevents the clamp from slipping. Corrugated malleable cast iron fixed jaw and sliding arm generate powerful, rigid clamping. .

 

Bessey WSM-12 9-12-Inch Welders Angle Clamp #ad

Bessey WSM-12 9-1/2-Inch Welders Angle Clamp

Bessey WSM-12 9-1/2-Inch Welders Angle Clamp #ad - Two-way swivel mounted spindle automatically adjusts the clamping block to workpieces of different thicknesses. Holds workpieces at a 90 degree angle. Unobstructed working area allows free access for welding or assembly operations and through-ways for t joints. Ideal for plates, angle iron, square tubing, pipe, channel iron, etc. Made of spheroidal cast iron for use as a heavy duty welder’s vise.

 

Bessey G7011 434 Vise Clamp #ad

Bessey G7011 434; Vise Clamp

Bessey G7011 434; Vise Clamp #ad - Features galvanized spindle with large acme thread, non-marring, glue resistant jaws and comfortable wood handle. Highly versatile, this unique tool is ideal for holding rounds, rectangles, and odd-shaped objects. .

 

Bessey KR3531 31-inch K Body REVO Fixed Jaw Parallel Clamp 2-Pack #ad

Bessey KR3.531 31-inch K Body REVO Fixed Jaw Parallel Clamp, 2-Pack

Bessey KR3.531 31-inch K Body REVO Fixed Jaw Parallel Clamp, 2-Pack #ad - Rapid action jaw opeing and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movabel jaw for spreading. 1,500 lb clamping force, with ergonomic designed 2 component molded soft grip handle. Perfect parallel jaw design for, 90 degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attahced to work surfaces using tk-6 clamps. Cold drawn steel alloy rail with six serrated edges for secure,slip pro0f clamping, k body revo clamps sit flusch on work surface for easy set ups. 3 3/4″ throat depth, with 3 removeable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces rail protector pads snap off when not needed.

 

Bessey TGJ2512 2-12-Inch x 12-Inch Regular Duty Tradesmen Bar Clamp #ad

Bessey TGJ2.512 2-1/2-Inch x 12-Inch Regular Duty Tradesmen Bar Clamp

Bessey TGJ2.512 2-1/2-Inch x 12-Inch Regular Duty Tradesmen Bar Clamp #ad - Patented profile rail. Nonmarring pads. These clamps need no clutching action and have a large acme thread for fast turning. This product is easy to use easy to install and highly durable. One-year warranty. Ideal for sheet metal, stainless steel, light-duty work, and woodworking applications, these bessey clamps are the choice of professionals worldwide. Nonslip locking device. Zinc-finished drawn rail.

 

Bessey Clamp welding F-style heavy duty pad 24 In x 475 In 1800 lb SGL-24 #ad

Bessey Clamp, welding, F-style, heavy duty pad, 24 In. x 4.75 In., 1800 lb (SGL-24)

Bessey Clamp, welding, F-style, heavy duty pad, 24 In. x 4.75 In., 1800 lb (SGL-24) #ad - Standard swival pad. 20″ nominal opening. 4-3/4″ nominal throad depth. 2660 lb nominal clamping pressure. Nominal rail size 1-3/16″ x 9/16″.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.