Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/4″ Length (Pack of 50)
- Thread rolling screw recommended for use in plastic. Black oxide finish offers mild corrosion resistance and lubricity. Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 1/2″ Length (Pack of 50)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Thread rolling screw recommended for use in plastic. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Passivated finish enhances the natural corrosion resistance of stainless steel.
Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #3-24 Thread Size, 1/2″ Length (Pack of 50)
- Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity. Thread rolling screw recommended for use in plastic.
Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #4-20 Thread Size, 3/4″ Length (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread rolling screw recommended for use in plastic. Zinc plating resists corrosion and has a reflective appearance. Pan head has a flat top and short vertical sides with a rounded top edge.
Steel Thread Rolling Screw for Metal, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, #4-40 Thread Size, 3/8″ Length (Pack of 100)
- Thread rolling screw recommended for use in metal. Steel is often used in applications where strength is the primary consideration. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance.
18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Star Drive, #8-16 Thread Size, 3/8″ Length (Pack of 25)
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. 18-8 stainless steel provides good corrosion resistance and strength. Passivated finish enhances the natural corrosion resistance of stainless steel. Thread rolling screw recommended for use in plastic. Pan head has a flat top and short vertical sides with a rounded top edge.
Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #2-28 Thread Size, 1/4″ Length (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Thread rolling screw recommended for use in plastic.
Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Star Drive, #2-28 Thread Size, 1/4″ Length (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Zinc plating resists corrosion and has a reflective appearance.
Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/8″ Length (Pack of 100)
- Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread rolling screw recommended for use in plastic. Pan head has a flat top and short vertical sides with a rounded top edge.
Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Star Drive, #4-20 Thread Size, 3/4″ Length (Pack of 100)
- Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Thread rolling screw recommended for use in plastic. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.
410 Stainless Steel Thread Rolling Screw for Metal, Passivated Finish, Pan Head, Star Drive, #8-32 Thread Size, 1/2″ Length (Pack of 25)
- Thread rolling screw recommended for use in metal. Pan head has a flat top and short vertical sides with a rounded top edge. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Passivated finish enhances the natural corrosion resistance of stainless steel. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.
Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #6-19 Thread Size, 1/4″ Length (Pack of 100)
- Thread rolling screw recommended for use in plastic. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Steel Thread Rolling Screw for Metal, Zinc Plated, Pan Head, Pozi Drive, Metric, M2-0.4 Thread Size, 6 mm Length (Pack of 100)
- Pozi drive is similar to a phillips drive but with straight sides and additional markings on the phillips cross that reduce the likelihood of the pozi drive driver slipping out and increase the amount of rotating force that can be used. Zinc plating resists corrosion and has a reflective appearance. Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in metal.
Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #2-28 Thread Size, 1/4″ Length (Pack of 100)
- Black oxide finish offers mild corrosion resistance and lubricity. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Thread rolling screw recommended for use in plastic. Steel is often used in applications where strength is the primary consideration.
Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #4-20 Thread Size, 3/4″ Length (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Thread rolling screw recommended for use in plastic. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration.
Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Star Drive, #2-28 Thread Size, 1/2″ Length (Pack of 100)
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Zinc plating resists corrosion and has a reflective appearance.
Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Star Drive, #3-24 Thread Size, 5/16″ Length (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Thread rolling screw recommended for use in plastic. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration.
Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #3-24 Thread Size, 3/8″ Length (Pack of 100)
- Thread rolling screw recommended for use in plastic. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity.
Steel Thread Rolling Screw for Metal, Zinc Plated, Pan Head, Star Drive, #4-40 Thread Size, 3/16″ Length (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Thread rolling screw recommended for use in metal.
Steel Thread Rolling Screw for Metal, Zinc Plated, Pan Head, Star Drive, Metric, M3-0.5 Thread Size, 10 mm Length (Pack of 100)
- Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in metal. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Pan head has a flat top and short vertical sides with a rounded top edge. Zinc plating resists corrosion and has a reflective appearance.
Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #2-28 Thread Size, 5/16″ Length (Pack of 100)
- Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Thread rolling screw recommended for use in plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Steel Thread Rolling Screw for Metal, Zinc Plated, Pan Head, Star Drive, #2-56 Thread Size, 3/16″ Length (Pack of 100)
- Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Pan head has a flat top and short vertical sides with a rounded top edge. Thread rolling screw recommended for use in metal.
Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #5-20 Thread Size, 1/4″ Length (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Thread rolling screw recommended for use in plastic. Zinc plating resists corrosion and has a reflective appearance. Pan head has a flat top and short vertical sides with a rounded top edge.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
