FeatherBoard Milescraft 1406 for Router Tables, Table Saws and Fences
- Ergonomic knobs help prevent over-tightening and provides non-slip loosening. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Split rail miter bar construction-provides maximum hold. Dual slide motion-side to side and forward action for quick and easy setup. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
- Dual slide motion-side to side and forward action for quick and easy setup. Pre-load tension design maintains consistent pressure across face of the featherboard. Split rail miter bar construction-provides maximum hold. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back. This innovative featherboard design provides consistent tension and maximum holding pressure created by unique split rail construction. 5/8″ and 3/4″ metal miter bars fit all standard miter slots.
M&N Multi-purpose Double Featherboards Feather Loc Board for Table Saws Router & Tables Fences Tools Miter Gauge Slot Woodwork DIY
- The featherboard are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting. This popular router-table accessory consists of not one, but two industrial-quality featherboards. When properly installed, its flexible fingers keep the workpiece pressed tightly against the router tabletop or router fence throughout the routing operation. . Usually the product will be sent in 2-5 working days and takes about 3–9 business days to reach you a featherboard is undoubtedly the most underrated router-table accessory of all time. The result is a dramatic increase in the accuracy, quality and safety of the cuts. The featherboard slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. Note that it can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot.
Big Horn 10215C – Deluxe Featherboard for Table Saw, Router Table, Shaper – Safety Yellow
- Fits most standard miter slots. Expandable nuts allow for snug fit. Easy-to-find bright safety yellow. Two locking knobs keep alignment straight. Made in usa.
Big Horn 10215 Deluxe Table Saw, Router Table & Shaper Featherboard
- Easy-to-find bright safety yellow. Two locking knobs keep alignment straight. Fits most standard miter slots. Expandable nuts allow for snug fit.
Big Horn 10215 Deluxe Table Saw, Router Table & Shaper Featherboard by Big Horn
- Fits most standard miter slotsexpandable nuts allow for snug fittwo locking knobs keep alignment straighteasy-to-find bright safety yellow.
Feather Duo Stackable FeatherBoard Table Saw Router Table High Density Foam Kit, 90 Pounds Pressure, Reversible, Replacement Fingers FP3
- Choose between the standard feather or the optional ultralight feather for greater control and feedback when feeding more delicate workpieces. Stackable featherpro includes two featherboards with one set of standard feathers, one set of ultralight feathers, and two complete sets of mounting hardware and spacers for stacking. Unique feather component is pressed into the featherpro body so you can easily replace foam feathers or reverse feed direction quickly. Feather foam will not mar softwoods, like other featherboards, when high tension is applied. Eva high density foam material of the feather component is very strong and durable.
Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station
- Offset handle gets your right hand out of harm’s way. Special handle geometry keeps push-loc parallel to your rep fence throughout the entire cut. Ergonomic “no-slip” grip has the best feel. Rubber sole helps prevent slippage and won’t mar your work piece. Rear tail hook secures push-loc to your work piece.
INCRA TSRTHW Table Saw Router Table Support Hardware
- Also available in green for use with your shapers & orange for use with your radial arm saw. A necessity for the safety-conscious woodworker. Yellow board mates are used with table saws & router tables. Great for mounting user-made tables to the ts rail system. Simultaneous, even pressure against the table & fence.
GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, Jointer, and Band Saw by MICROJIG
- Moving-blade-guard hand protection. 3-directional force for total control of the workpiece and virtually eliminate kickback. Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more. For use on table saws, router tables, jointers, and band saws. Made in the usa a true microjig innovation. Precise 1/4″ thin rips. Includes instructional and advanced techniques dvd.
MICRODIAL Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking (Works with GRR-RIPPER)
- Two independent memorylocks keeps angles for repeat taper cuts. Precision taper cuts as accurate as 1/8 of a degree. Full instructional dvd and bonus project plans included. Cut up to 8-sided tapered legs together with the grr-ripper 3d pushblock. Infinite taper adjustments between 0 and 10 degrees.
JessEm 07305 Tool Setting Gage for Table Saw Router Table Drill Press Banddaw
- Turn it on its side to set the distance from your fence to your router bit, bandsaw blade or drill press. Quickly set the height of your router bits, or drill press depth. Adjustable in 1/16″ increments with a total range of 2-1/2″. Faster then set-up blocks and far more accurate then a ruler.
Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables by Bench Dog
- Two multipurpose featherboards for holding the stock against the guide fenceeasy set-up feature reduces kickback, binding, lifting, and bent bladeshigh tech polymer ensures it will maintain its original shapeadvanced design means no marring to your workpiecedesigned for 1/4 t-tracks only. Requires benchdog 10-012 miter slot adapter for miter slots on routers, shapers, band saws, and table saws.
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
- 3-directional force for unmatched control of the work piece. Virtually eliminates kickback. Moving-blade-guard hand protection. Work with small stock safely. Work with small stock safely on the table saw, router table, jointer, & band saw. 3-directional force for total control of the workpiece. Precise 1/4″ thin rips.
Bench Dog 10-005 Feather-Loc Single Featherboard for Table Saws and Router Tables by Bench Dog
- Multipurpose featherboard for holding the stock against the guide fenceunique miter gauge slot allows quick removaleasy set-up featurehigh tech polymer ensures it will maintain its original shapeadvanced design means no marring to your workpiece.
Saws & Blades Patented Table Saw and Router Table Push Block, Shoe, Stick with non-slip pads
- 450 square inches of a durable aluminum work surface. Turn your router into a stationary power tool with this sturdy table. Saws & blades patented table saw and router table push block, shoe, stick with non-slip pads #0043/6. Fits most routers with up to 6″ diameter base plate. The multi-functional fence makes joiner cuts easyrouter and bits not included.
Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables
- Two multipurpose featherboards for holding the stock against the guide fence. High tech polymer ensures it will maintain its original shape. Easy set-up feature reduces kickback, binding, lifting, and bent blades. Advanced design means no marring to your workpiece. Designed for 1/4″ t-tracks only requires benchdog 10-012 miter slot adapter for miter slots on routers, shapers, band saws, and table saws.
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences, New
- All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. Split rail miter bar construction-provides maximum hold. Dual slide motion-side to side and forward action for quick and easy setup.
Milescraft Tablesaw & Router Table Push Stick
- The milescraft model 3402 pushstick is more than a standard push stick. To keep the push stick, depth gauge, and other table top accessories close at hand, a docking station with a rare earth magnetic base has also been included. A built in rear and soft surface base provides secure control of the stock without damage., 3402 upc, 893264340209pushstick makes working safer while routing or cutting on your table saw tall handle for a firm grip rear foot grabs stock securely narrow profile 5/8” wide base for standard or narrow ripping depth gauge and docking station included high visibility yellowthe milescraft model 3402 pushstick is more than a standard push stick. To keep the push stick, depth gauge, and other table top accessories close at hand, a docking station with a rare earth magnetic base has also been included. It has been engineered with a tall, tilted, natural grip handle that gives firm control while providing improved visibility and clearance from the cutting blade or bit. Manufacturer no. A built in rear and soft surface base provides secure control of the stock without damage. Included in the package is a depth gauge for measuring, marking, or locating blades, bits, and fences. Included in the package is a depth gauge for measuring, marking, or locating blades, bits, and fences. It has been engineered with a tall, tilted, natural grip handle that gives firm control while providing improved visibility and clearance from the cutting blade or bit.
MLCS 9027 Dust Catcher for Table Saws and Router Tables
- Attaches easily with supplied snap-on hardware. Two locking knobs keep alignment straight. Expandable nuts allow for snug fit. Easy-to-find bright safety yellow.
Big Horn 10225 Table Saw, Router Table & Shaper Featherboard 3 Piece Set by Big Horn
- 2 pounds shipped. 3-piece set including table saw, router table, and shaper featherboardmakes ripping long stock safer and easier by guiding your work pieceholds wood against the fence for better cutting fits most standard miter slots2 locking knobs includes featherboard, push block, and push stickweighs 1.
Featherboard, Drillpro Double Featherboards Feather Loc Board for Table Saws Router & Tables Fences Tools Miter Gauge Slot Woodworking DIY
- Provide elastic pressure, prevent wood rebound and pushing the block more smooth. Quickly set tension for consistent cuts while reducing the chance of kick-back. Note that it can also be used on a table saw, shaper, band saw or any other woodworking machine with a miter gauge slot. 4 miter bars, that fit most standard miter slots (19395mm), also four 1/4″ t-track bolts and two tandem t-slot bolts. The featherboard is made from high-tech polymer ensures it will maintain its original shape and for holding the stock against the guide fence.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
