22 Coolest 3 Inch Diameters

 

Jet 575948 9-Inch Long Aluminum-Oxide Hard Sanding Sleeve 3-Inch Diameter 100 Grit(4 sleeves) - Aluminum-oxide grain. 4 sleeves per package. Resin bonded for maximum grain protection. Tough fiber-backed sleeve. Fits jet jbos-5, jovs-10, and other brand sanders.

 

ABN 80 Grit 4.5 Inch Length Aluminum Oxide A/O Sanding Sleeves 6 Pack, 1/2″, 3/4″, 1″, 1.5″, 2″, 3 Inch Diameters - A must have to abrade, sand, finish and polish hard or soft woods from bare wood to the deepest and finest of finishes. Includes (1) size of each of the following 45 inch spindles/sleeves 1/2″, 3/4″, 1″, 15″, 2″, and 3″ inches. Designed for use with oscillating and spindle sanders. 80 grit 45 in alum oxide sanding sleeves constructed from high strength paperboard and 80 grit aluminum oxide to prevent loading and increase longevity.

 

Speedi-Products EX-EVML 03 3-Inch Diameter Micro Louver Eave Vent, White - Long aluminum tail for duct connection. Speedi-products 3-inch white micro louver eave vent. Speedi-exhaust products are made in the usa. Seal joints with approved duct mastic sealants & tapes. Used for exhaust or fresh air intake venting systems.

 

MK Morse Hole Saw AT48 3-Inch Diameter Carbide Tipped - Tungsten carbide tooth tips offer the highest wear resistance possible and longer life cutting abrasive materials. 1 hole saw per box. Ground and set teeth to help cut materials that bi-metal saws will not cut. 3 teeth per inch creates wider gullet for better chip clearance and faster cutting. Maximum cutting depth 1-1/2-inch.

 

Dynabrade 90028 3-Inch Diameter Synthetic Wool Reattachable Hook-Face Backing Polishing Pad, Polishing/White, White - Can be used with sanding cremes for metal, fiberglass and composites. Industrial-rated for tough production performance. Glazes can be applied for high glass after compounding. Excellent for buffing and polishing fiberglass, plastics and other materials. Synthetic wool final finishing and polishing.

 

Tan 3 Inch Diameter Heavy Duty Felt pads – 12 Pieces - 100% polyester felt. Self-adhesive just peel and stick the surface should be clean and free from nicks, scratches, dents, dust and debris to ensure a better stick from the pads. Protect floors and furniture from scratches. Includes 12 pieces of brown felt pads that are 3/16″ thick.

 

Speedi-Products EX-RCGU 03 3-Inch Diameter Galvanized Umbrella Roof Vent Cap - Speedi-exhaust products are made in the usa. Consult your local building codes for approved installation practices. 3-inch diameter collar. Seal joints with approved duct mastic sealants & tapes. Used for exhaust venting systems.

 

Woodstock W1006 3-Inch Blast Gate for Use with Vacuum/Dust Collectors (3-inch Diameter 2 Pack) - We offer blast gates in both black abs plastic and aluminum. For those customers who prefer metal, our top quality aluminum blast gates feature a cast aluminum body with steel gate and locking knob. Used in every dust collection system to control air flow from one machine to another, blast gates maximize system efficiency. Plastic blast gates are economically priced, have a textured surface and an easy sliding gate action. Our blast gates are fast movers.

 

MLCS 9245H 3-Inch Diameter Steel Forstner Bit with Hex Shank - The saw teeth design for larger diameter bits (1-inch and larger) stop burning and cut faster without losing the advantages of forstner bit action. These bits will not move off center through unusual grain or knots. For sizes 2-1/4-inch through 4-1/2-inch shank size is 1/2-inch and overall length is 6-3/8-inch. Sizes 1/4-inch to 7/8-inch bits are supplied with solid rims. Great for mounting mini-quartz clock movements, cup hinges and door locks. . Mlcs forstner bits are manufactured from high quality steel that is long lasting, precision ground for heavy use and easily resharpened. They enlarge existing holes with ease and can bore any arc of a circle. Shank size is 3/8-inch and overall length is 3-1/2-inch for sizes 1/4-inch through 2-1/8-inch excluding metric sizes. Use large bits in drill press. Forstner bits are designed to drill flat bottom or through holes cleanly in end grain, thin stock, veneers and regular stock.

 

Speedi-Products EX-30AP 360 3-Inch Diameter by 60-Inch Length 30-Gauge Aluminum Rigid Pipe - Consult your local building codes for approved installation practices. Seal joints with approved duct mastic sealants. Used in hvac warm air supply, return and exhaust duct systems. Insulate ductwork for improved energy efficiency and comfort. Speedi-exhaust products are made in the usa.

 

PSI Woodworking Products CF3J Faceplate 1-Inch by 8TPI 3-Inch Diameter - Fits any lathe with a 1-inch by 8tpi spindle thread. Perfect for all small bowl turning. 3-inch diameter faceplate with 4 screw mounting holes. Has machined flats to grip with a wrench, easy on and easy off. All steel construction.

 

Prime-Line Products GD 52189 Pulley with 2 Straps and Axle Bolts, 3-Inch Diameter,(Pack of 2) - It can be used at stationary or spring pulley positions. This pulley and strap is constructed from heavy duty galvanized steel. It features a case hardened steel race and comes factory lubricated.

 

Culligan OR-233 O-Ring of 3-Inch Diameter - Inlet/out filter housing o-ring. The or-233 rubber o-ring gasket is 3″ in diameter and is a buna-n o-ring. For use with the culligan us-600 under-sink drinking water filter. For residential use. The or-233 o-rings are used to seal the housing sump to the housing cap to prevent leaks. Use with model nous-600, model nosy-2300 and model no sy-2650. The or-233 o-ring has been branded under ace hardware, american plumber, ametek, culligan, pentek, us filter plymouth products. The or-233 oring should be replaced every two filter changes or if there is damage to the or-233 oring.

 

Bully Tools 92302 3-Inch Diameter Bulb Planter with Steel T-Style Handle - Tube measures 3-inches by 9-inches. All steel construction. 100% made in the usa. Commercial grade. Tstyle handle. Comes with a limited lifetime warranty. Features a steel t-style handle. 3-inch diameter bulb planter. Limited lifetime warranty.

 

Dynabrade 50125 3-Inch Diameter Disc Pad - Are compatible with angle-head and palm-style mini-dynorbital sanders, angel-head buffers. 5,000 rpm maximum. Hook-face pads accept reattach able abrasive discs as well as polishing buff pads.

 

Shepherd Hardware 9807 3-Inch Swivel Stem Caster, Rubber Wheel, 7/16-Inch Stem Diameter, 175-lb Load Capacity - Shepherd hardware thermoplastic rubber casters offer resistance to oils and chemicals. . The non-marking wheel surface combines with superior endurance and quiet mobility. The shepherd 3265 models features a 3-inch diameter wheel, swivel threaded stem, and a 110-lb load rating per caster.

 

MK Morse Hole Saw ATCG48 3-Inch Diameter Tungsten Grit - Cutting depth of 1-1/2″ (38mm). Long-lasting choice for very hard abrasive materials. These hole saws create clean holes in materials too hard or abrasive for standard bi-metal saws, or so thin they would strip bi-metal or chip carbide teeth. Arbor required. Features super resistance to heat, wear and abrasion with shock resistant back tungsten carbide grains are bonded to alloy backs with a gulleted snag resistant edge ct pilot drill recommended for masonry type materials applications acoustic tile, brick, cast iron, cement board, ceramics, cinderblock, composites, computer flooring, fiberglass, hardened steel, particleboard, asbestos board, and formica.

 

Espero Outdoor Lamp Post,Composite,Black finish , 84inch High by 3-Inch Diameter - Fiberglass composite material, great alternative to metal lamp post. Low maintenance, rust proof, weatherproof, longer life span. Simple but chariming design, fits all kinds of panel well, great decoration for your backyard, lawn, driveway. Height 84″, diameter3″, black polished finish. Light weight but durable, easy to transport, will not deform or break during delivery.

 

Speedi-Products EX-HWB 03 3-Inch Diameter Plastic Wide Mouth Hood, Brown with 11-Inch Long Tail - . Can be used for remodeling, do it yourself and new residential projects. Speedi-products 3-inch brown plastic wide mouth exhaust hood with back draft flapper and 11-inch tailpipe. Used in dryer and exhaust venting systems.

 

Speedi-Products EX-HWW 03 3-Inch Diameter Plastic Wide Mouth Hood, White with 11-Inch Long Tail - Used in exhaust venting systems. Speedi-products 3-inch white plastic wide mouth exhaust hood with back draft flapper and 11-inch tailpipe. Can be used for remodeling, do it yourself and new residential projects.

 

Yonico 12136 Raised Panel Router Bit with Ogee Door 3-Inch Diameter 1/2-Inch Shank - Choose from our selection of rail and stile router bits to complete your raised panel doors. Two flute carbide cutters & 1/2″ shank. . The yonico panel raiser router bit 12136 will create beautiful raised panels for cabinet doors in the popular ogee design.

 

Speedi-Products EX-AFC 396 3-Inch Diameter by 96-Inch Length Aluminum Flex Pipe Crimped One End - Consult your local building codes for approved installation practices. Speedi-exhaust products are made in the usa. Ideal for non insulated general purpose venting systems. Non combustible corrugated continious lockseam. Seal joints with approved duct mastic sealants and tapes.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.