Bison 5″ Dia. 1.3780″ Center Hole 3-Jaw Set-Tru Self-Centering Scroll Chuck
- Bison 5″ dia 13780″ center hole 3-jaw set-tru self-centering scroll. Bolt circle diameter 330″. 3 jaw self centering lathe chuck. Runout 0003″. Quantity 1 shipping weight 725 lbs.
Ridgid 43540 Scroll, Chuck
- . This product manufacture by united states. This item is used for handtools & tool organizers ,multitools. 43540 scroll, chuck.
Mini Jumbo Jaws for Oneway Scroll Chuck System
- Grippers are made of hard rubber pressed over a tapered steel sleeve for superior holding. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the mini jumbo jaws can hold an infinite number of round, oval or square shapes. Because of their 8-1/2inch diameter, these mini jumbo jaws for the oneway scroll chuck (#22719, sold separately) and talon chuck (#20761, sold separately) work on smaller lathes.
South Bend Lathe SB1224 12-Inch 3-Jaw D1-8 Scroll Chuck
- Absolute top quality chucks made for high precision work and made with tight tolerances to satisfy the most demanding machinists out there. Supplied with all the hardware for mounting on your lathe. These south bend lathe chucks are amongst the best available on the market.
Ridgid 54077 Scroll, Chuck 1233
- This product manufacture by united states. 54077 scroll, chuck 1233. This item is used for hand tools & tool organizers ,multitools.
South Bend Lathe SB1219 8-Inch 3-Jaw D1-5 Scroll Chuck
- Supplied with all the hardware for mounting on your lathe. These south bend lathe chucks are amongst the best available on the market. Absolute top quality chucks made for high precision work and made with tight tolerances to satisfy the most demanding machinists out there.
South Bend Lathe SB1314 Zero-Tru 6-Inch 3-Jaw Adjustable Plain Back Scroll Chuck
- The sb1314 is a scroll chuck and all jaws close together. These south bend lathe chucks are amongst the best available on the market. High precision 4 jaw scroll chuck with 2 piece jaws and plain backs the sb1313 is a scroll chuck and all jaws close together.
BISON “SET-TRU”Precision Self-Centering Scroll Chuck -CHUCK SIZE: 6″ Tool Material: Steel Body Max. RPM 3,500
- Excellent for use where versatility takes precedence over very high load requirements. . (4) micro-adjustment screws provide. A unique micro-adjustment feature enables concentricity to be adjusted within 0. 0002″ (0. 0005″ tir repeatability. 005mm) tir.
South Bend Lathe SB1222 10-Inch 3-Jaw D1-6 Scroll Chuck
- Supplied with all the hardware for mounting on your lathe. Absolute top quality chucks made for high precision work and made with tight tolerances to satisfy the most demanding machinists out there. These south bend lathe chucks are amongst the best available on the market.
Bison 12″ Dia. 4.0551″ Center Hole 3-Jaw Self-Centering Scroll Chuck Front Mounting
- Bison 12″ dia 40551″ center hole 3-jaw self-centering scroll chuck. Use with rotary tables and other devices where back mounting chucks cannot be used. Universal 3 jaw scroll lathe chucks with two-piece hard reversible jaws.
South Bend Lathe SB1311 10-Inch 3-Jaw Plain Back Scroll Chuck
- Top quality chucks made for high precision work and made with tight tolerances. High precision 3 jaw scroll shucks with 2 piece jaws and plain backs. These south bend lathe chucks are amongst the best available on the market.
Oneway Scroll Chuck System
- This chuck requires an insert, you can use 3/4″ x 16 tpi insert (#22733 sold separately) 1″ x 8 tpi insert (#22726 sold separately) 1-1/4” x 8 tpi insert (#21358 sold separately). This prevents damage to holes in the chuck. Different jaw sets are available for the chuck, which allows you to fit the chuck to suit your specific needs. This design creates a constant differential which allows one-handed tightening. There are four lever holes in the body, and three holes in the scroll. If your needs change or grow, these chucks can be adapted to change and grow as you do. 2 levers plus 4 holes in body, 3 in the scroll gives you 1-handed tightening oneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner’s every need. Large projects can be turned more safely, and turning can be done at the ends of long stock. Levers are made from high strength steel and will not deform or bend in use. Less time spent getting ready to turn and more time spent turning means better quality, and more finished projects. Chucks were designed to meet most turning needs.
Gator 1-105-0800 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Precision Forged-Steel 1-105-0800
- Includes(1) set of two-piece reversible jaws. (1) set of mounting screws. 2 year warranty. Bushings are hardened and ground, pressed into the pinion seats. Featuresjaw teeth and guides are hardened and fully ground on both sides. Jaws, pinions and bushings are made of fine alloy steel. Universal semi-steel bodybody is made of high quality cast iron. Hard top jaws and hard master jaws. Pinions are hardened and ground. Precision forged-steel bodylasts at least 2 times longer than universal semi-steel chucks. (1) wrench. Scroll plate is drop-forged of fine alloy steel, hardened and ground. Body is drop-forged of highest grade steel. 1 year warranty.
Jumbo Jaws for Oneway Scroll Chuck System
- Chucking capacities of the oneway scroll chuck with jumbo jawsexternal (compression) 2-7/8inch minimum, 11inch maximum internal (expansion) 4-7/8inch minimum, 12inch maximum chucking capacities of the oneway talon chuck with jumbo jawsexternal (compression) 2-7/8inch minimum, 11inch maximum internal (expansion) 4-7/8inch minimum, 12inch maximum brand oneway manufacturer part number 2047 weight (lbs) 28000 . Universal 3 jaw scroll lathe chucks with two-piece hard reversible jaws. Use with rotary tables and other devices where back mounting chucks cannot be used.
South Bend Lathe SB1236 9-Inch 4-Jaw Plain Back Scroll Chuck
- These south bend lathe chucks are amongst the best available on the market. High precision cast iron 4-jaw scroll chuck with 2 piece jaws and plain backs. Absolute top quality chucks made for high precision work and made with tight tolerances to satisfy the most demanding machines out there.
BISON Self-Centering Scroll Chuck – CHUCK SIZE: 6″ Tool Material:
- Use with rotary tables and other devices where back mounting chucks cannot be used. Can be mounted directly on 3 & 6 t-slot rotary tables. Universal 3 jaw scroll lathe chucks with two-piece hard reversible jaws.
TTC Mini Scroll Chuck with Shank – CHUCK SIZE: 2″ Tool Material: Universal Semi-Steel Shank: 1 MT
- Provided with (2) keys. Medium duty type. Chucks are threaded back scroll, self centering type.
BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 6″ Tool Material: Precision Forged-Steel
- Jaws, pinions and bushings are made of fine alloy steel. Body is drop-forged of highest grade steel. Bushings are hardened and ground, pressed into the pinion seats. Lasts at least 2 times longer than universal semi-steel chucks.
BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Universal Semi-Steel
- Pinions are hardened and ground. Body is made of high quality cast iron. Scroll plate is drop-forged of fine alloy steel, hardened and ground. Jaw teeth and guides are hardened and fully ground on both sides.
South Bend Lathe SB1352 5-Inch 3-Jaw D1-3 Scroll Chuck
- Supplied with all the hardware for mounting on your lathe. 5-inch 3-jaw scroll chuck d1. D1 camlock mount.
#1 Jaws for Oneway Scroll Chuck System
- . Install these jaws on your oneway scroll chuck (#22719, sold separately) or talon chuck (#20761, sold separately) for turning small bowls, knobs, vases or spindles.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
