Tenryu AC-25560DN 10″ Carbide Tipped Saw Blade ( 60 Tooth TCG Grind – 5/8″ Arbor – 0.087 Kerf)
- Tcg (triple chip grind), center of kerf is cut first then flat-top raker cleans out chips and widens the cut commonly used for longer sharp-life in hard materials also good ripping if rake is positive. Appropriate triple-chip grind pattern for non-ferrous metals. Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts. Quality carbide ground to precision.
Timberline 10040 Ti- Cut and Trade General Purpose and Finishing ATB Grind Thin Kerf Carbide Tipped Saw Blade
- 10-inch diameter, 40-teeth. Carbide tipped, professional quality. Thin kerf. Designed to cut softwood, hardwood and plywood. 18-degree hook angle, 5/8-inch bore, atb grind.
Tenryu SL-16552 6-1/2″ Carbide Tipped Saw Blade ( 52 Tooth ATAF Grind – 5/8″Ko Arbor – 0.063 Kerf)
- Extra smooth crosscuts using cordless and portable saws. Ptfe coated plate reduces pitch build up and lowers resistance. , 52 teeth, 5/8″ knockout arbor, ataf grind,. Tenryu puts a great deal of care in manufacturing their saw blades to ensure every blade is of the highest quality. See our article on making tenryu saw blades. Tenryu silencer series saw blades sl-16552. Silencer body laser cut, resin filled slots for less noise and less vibration. Great for sliding compound miter saws. 063″ kerf, 18 degree rake. 6-1/2″ dia.
Tenryu PT-11536 4-1/2″ Carbide Tipped Saw Blade ( 36 Tooth ATAF Grind – 3/8″ Arbor – 0.063 Kerf)
- Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge. Aggressive rake angles for maximum cutting speed and efficiency. High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up. Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
Makita A-90722 12-Inch 60-Teeth General Purpose Carbide-Tipped Saw Blade
- 1-inch arbor. 12-inch x 60-inch. Ferrous metal.
Makita A-94904 Tungsten Carbide Tipped Saw Blade 5-3/8-Inch 16Tooth
- Makita a-94904 specifications diameter 5-3/8″ arbor 5/8″ teeth 16makita a-94904 features ideal for general purpose cuts the thin kerf design works well for a lighter cutting load and aids in the elimination of wasted material the precision-ground teeth enable a clean cutting surface and promote a longer blade life applications general purpose, trim cutting, wood cutting, fiber cement cutting.
American Emblem Tool Co 22245 Carbide-tipped Saw Blade 7-1/4″
- 24 teeth 5/8′ arbor thin kerf design premium carbide tooth design for general purpose applications lasts 10 times longer than steel blades carded , sp+. American emblem ace carbide-tipped saw blade 7-1/4′ dia.
Tenryu MP-30580AB 12″ Carbide Tipped Saw Blade ( 80 Tooth ATAFR Grind – 1″ Arbor – 0.118 Kerf)
- Recommended for cutting hardwoods, laminates, plywoods, softwoods and composites. This tenryu mp-30580ab precision miter saw blade is 12-inches with a 5/8-inch arbor. The saw blade is designed with carbide tipped and will provide a smooth finish on wood using a mier saw. .
A.G.E. Series by Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 5/8-Inch Bore, 4&1 Grind Carbide Tipped Saw Blade
- 10-inch diameter, 50-teeth. 126-inch kerf, 087-inch plate. Designed to rip and crosscut hardwoods, softwoods, as well as sheet stock such as plywood and particleboard. 15-degree hook angle, 5/8-inch bore, combination 4+1 grind. Carbide tipped, industrial quality.
Proxxon 28734 80mm Carbide Tipped Saw Blade for FKS/E 24-Teeth
- 14″ d, 0. Overall height, top to bottom -0. Generic dimensions -blade dimensions 3. 14″ h x 0. Product type -circular. 23″ w x 0. 39 inches. -24 teeth. 39″ d. Dimensions overall length, end to end -7. 28 inches. 39″ h x 7. 28″ w x 3. 1 lbs. 1 pounds. Overall product weight -0. -Overall dimensions 0. -Use for cutting difficult to separate materials as aluminum, hard wood, chipboard, fiberboard and plastics. 28734 features -carbide tipped saw blade.
Tenryu MP-305100CB2 12″ Carbide Tipped Saw Blade ( 100 Tooth ATAF Grind – 5/8″ Arbor – 0.126 Kerf)
- The longer life tenryu mp-305100cb2 precision 12-inch table saw blade is designed for woodcutting various wood materials such as hardwoods, laminates, plywoods, softwoods and composites. Ideal for miter cuts, cross cuts and cut-offs. Use for super smooth and accurate wood cuts.
Superior Steel 18542 7-1/4″ 42 Teeth 5/8″ Arbor Metal Ferrous Cutting Carbide Tipped Saw Blade
- Superior steel 18542 carbide blades metal ferrous cutting have been designed to fit skil 77 worm drive saw. Fits any saw that will take 5/8 inch arbor and the skil 77 worm drive saw, features a fully hardened thin kerf plate means less material is removed which allows for a faster cut while still remaining straight and true | expansion slots reduce blade warping. Each blade has a thin-plate that has been hardened to stay flat and run true, cut after cut.
A.G.E. Series by Amana Tool MD10-600 Cut-Off and Crosscut 10-Inch Diameter by 60-Teeth by 5/8-Inch Bore, ATB Grind Carbide Tipped Saw Blade
- Designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet stock including chipboard. 126-inch kerf, 087-inch plate. 12-degree hook angle, 5/8-inch bore, atb grind. Carbide tipped, industrial quality. 10-inch diameter, 60-teeth.
Makita B-07353 6-1/2″ 48T Carbide-Tipped Saw Blade
- With the sp6000j, the b-07353 is an ideal blade for a full range of cutting applications including ripping plywood. The blade features high-grade carbide tips for improved durability, and is engineered for smoother cutting. The makita 48t carbide-tipped saw blade is the ideal accessory for the makita 6-1/2″ plunge circular saw (model sp6000j, sold separately).
Timberline 250-600 General Purpose and Finishing 10-Inch Diameter by 60-Teeth by 5/8-Inch Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade
- 0-degree hook angle, 5/8-inch bore, thin kerf, atb grind. 10-inch diameter, 60-teeth. For miter saw or stationary table saw. Designed to cut softwood, hardwood & plywood. Carbide tipped, professional quality.
Tenryu PT-26036 10″ Carbide Tipped Saw Blade ( 36 Tooth ATAF Grind – 5/8″Ko Arbor – 0.079 Kerf)
- Tico hi-density carbide to maximize blade life and material finish. Perma-shield coating that reduces heat and pitch build up along with rust. Laser cut anti-vibration design, built in stabilizer no need for stabilizer plates.
Timberline 12060 Ti-Cut General Purpose and Finishing 12-Inch Diameter by 60-Teeth by 1-Inch Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade
- Thin kerf. 12-inch dia, 60-teeth. Carbide tipped, professional quality. 10-degree hook angle, 1-inch bore, atb grind. Designed to cut softwood, hardwood & plywood.
Timberline 175-40C Specialty All Purpose Diamond Knockout ATB Grind Thin Kerf Carbide Tipped Saw Blade
- Black&decker, bosch, dewalt, hitachi, jepson, makita, milwaukee, porter-cable, ryobi, skil. These are very popular all-purpose blades used for ripping and cross cutting wood framing, decking and plywood. All blades fit popular portable 7-1/4″ electric & worm drive circular saws. A durable series of blades designed for the contractors and do-it-yourselfers.
Neiko 10769A USA 80 Tooth Carbide Tipped Saw Blade, 14″
- 14″ x 80 tooth carbide tipped saw blade, thin kerf design gives you longer blade life and less material loss per cut. 14″-diameter, 80 carbide tipped teeth, max. This blade can be sharpened to extend the life of your purchase. A. Neiko tools u. Speed 4300 rpm, 1″ arbor. S.
Tenryu RS-25540-U 10″ Carbide Tipped Saw Blade ( 40 Tooth ATAF Grind – 5/8″ Arbor – 0.079 Kerf)
- Large, high-grade carbide tips selected for long life in woodworking applications. Individually hand-hammered, fully heat hardened steel plates for flat, true, wobble-free operation. Ample side clearance provides for air flow between carbide and workpiece, limits likelihood of burning even on heavy rips this also prevents premature dulling. Ataf (alternate top alternate face) extra sharp cutting tips reduce load on saw face beveling diverts cutting load left and right instead of straight on creates a better shearing action, especially in cross-grain natural wood. Aggressive grind angles for easy performance in heavy-duty jobs honing carried out at 400 grit to limit microchipping and produce a very keen edge.
OrangeA Circular Saw Blade Sharpener 125MM 110V 370W Saw Blade Sharpener Machine Rotary Angle Mill Sharpener Grinder Grinding Machine for Carbide Tipped Saw Blade
- Voltage 110v, power 370w, grinding wheel size：492″. This circular saw blade also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. The circular saw blade grinder is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. The saw blade sharpener with steel chassis construction, strong structure. Circular saw blade grinder can have a very good co-operation with the diamond sanding wheel.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
