Gowe® Battery Powered Multi-functional Hydraulic Tools for Crimping, Cutting, Punching
- 3, the unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion the crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight corners and other difficult working areas. 1, the hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached a manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp the unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released. Crimping force 60kn stroke 42mm crimping per charge 70crimps(150mm2 cu cable) crimping cycle 3s-6s(depend on the size) cutting range 40mm(cu/al) punches per charge 100punches max punching hole round puncher 605mm punches the thickness below 3mm(90x90mm) battery voltage 18v battery capacity 30ah charging time 2-25hs package steel case crimping dies 16,25,35,50,70,95,120,150,185,240,300mm2 note 2 battery, 1 charger, 2 set o-ring for oil vat and safety valve. Don’t buy others’ fakes only buy from gowe industrial can enjoy after-care service. 5, li-ion batteries do neither a memory effect nor self discharge even after long periods of non operation the tool is always ready to operate in addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to nimh batteries a temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
Burndy Y35 Hypress Hand-Operated Hydraulic Tool, 10000 psi Operating Pressure, 4-3/4″ Head Width, 23-1/4″ Overall Length
- Compatible with burndy “u” dies (not included). Hand-operated hydraulic crimper for overhead line work and compression grounding applications in conjunction with a 10,000 psi hydraulic pump. Crimp head rotates 180 degrees for improved access to connections. Provides 12 tons of crimping force. Comfort grip handles reduce user fatigue from continuous use.
MegaBrand 10 ton Hydraulic Metal Hole Punch Press Driver Kit Tool Set
- Accommodating more material stainless steel, aluminum, steel, plastic etc. 6 dies & punches interchangeable to meet different needs. Portable metal case for convenient traveling. Two metal clasps to lock the kit firmly. Plastic grip at the end of the long steel handle.
Hole Punch Kit – Hydraulic Tool 1/2″ to 2″ (Pkg of 2)
- 6 ton hydraulic tool & punch/die sets for cutting holes up to 2″ diameter. Hole punch kit, hydraulic -hole punch kit, 6. 6 ton hydraulic tool & punch/die sets kit contains 1/2″ thru 2″ punch/die sets, draw bolts, spacer & hydraulic tool 40 cr carbon steel punches & dies split slug design for easy removal of slug from die order qty of 1 = 1 piece below is more info on our hole punch kit, hydraulic tool. Hole punch kit, hydraulic tool features include hole punch kit, 6.
Generic QY*US4*160215*260 *8**1563** Compressor Auto Strut C Coil Spring 1 Ton S 1 Ton Strut ing Com Shop Repair Jacks HD acks HD Air Hydraulic Tools p Repair Jacks HD
- —-note—- and if any questions, please contact us first before using a—/to–/-z or neg-a-t-iv-efee-db-a-c-k or char-g-e-ba-ck or other ama-zo-n procedure which will give us lots of troubles product description heavy duty powder-coated strength and durability with rust-resistant welded steel frame bracket angle rotates to fit most models and sizes of strut springs can be slide for height adjustment ram bracket can be floor mounted for stability feature foot-pedal with quick release working range4″ to 10″ springs working height 14¡± capacity 1 ton color unit may varies.
37 Degree Flaring and Double Flaring Hydraulic Tool Kit-2pack
- Item package quantity-2. 37 degree flaring and double flaring hydraulic tool kit.
Gowe® Manual hydraulic pump for driving hydraulic tools, Easy operate hand hydraulic pump 900 cc
- 3 accessories including 2m high pressure hose and coupler plug p/t 3/8″ thread, oil must be changed half a year. 2 two stages speed action for rapid ram advantage. Please see more specifications on the pictures, don’t buy others’ fakes only buy from gowe industrial can enjoy after-care service. 1 manual hydraulic pumps to drive crimping head, cutting heads and punch head.
Generic LQ..8..LQ..1563..LQ or Auto Compressor Auto t Coil Coil Spring ydr Air Hydraulic Tools c Tools 1 Ton Strut air Jacks H Shop Repair Jacks HD US6-LQ-16Apr15-260
- Product description heavy duty powder-coated strength and durability with rust-resistant welded steel frame bracket angle rotates to fit most models and sizes of strut springs can be slide for height adjustment ram bracket can be floor mounted for stability feature foot-pedal with quick release working range4″ to 10″ springs working height 14¡± capacity 1 ton color unit may varies.
CHIMAERA 6 Ton Hydraulic Knockout Punch Driver Tool Kit with 6 Dies
- 6 dies & punches interchangeable to meet different needs. Accommodating more material stainless steel, aluminum, steel, plastic etc. Portable plastic case for conveniently taking along with. Aluminium alloy body on/off switch for more safety. Cylinder can be rotated 360 degrees plastic grip at the end of the long handle.
New 15 Ton Driver Hydraulic Tool Kit W 10 Dies 1/2″-4″ Knockout Punch Set W Case
- With the brackets on the bottom of the hydraulic pump portable metal case for convenientl. 15 ton hydraulic knockout punch driver kit with 10 dies brand new in box and ready to ship. Laborsaving and fast operation accommodating more material stainless steel aluminum. Steel plastic etc 10 dies & punches interchangeable to meet different needs plastic grip. At the end of the long steel handle rotatable on / off switch for more safety easy seating.
Burndy Y39 Hypress Hand-Operated Hydraulic Tool, 10000 psi Operating Force, 3-1/8″ Head Width, 23″ Overall Length
- Hand-operated hydraulic crimper for use with a range of copper and aluminum terminals, splices, and taps in conjunction with a 10,000 psi hydraulic pump. Provides 12 tons of crimping force. Compatible with burndy “u” dies (not included). Molded rubber covering on head, body, and handles for protection. 3-1/8″ wide crimp head rotates 180 degrees for improved access to tight spaces.
Eminentshop 15 Ton Driver Hydraulic Tool Kit w 10 Dies 1/2″-4″ Knockout Punch Set
- Portable metal case for conveniently taking along with. Accommodating more material stainless steel, aluminum, steel, plastic etc. Rotatable on / off switch for more safety. 10 dies & punches interchangeable to meet different needs two metal clasps to lock the kit firmly. Perfect for electrical, construction, maintenance, service applications etc.
Torc TTX 01 Square Drive Hydraulic Tool, TTX-1, 3/4″
- The most cost effective, highest quality torque wrenches in the world made in the usa the simplification of preventative maintenance for all heavy industries. Multi position hose couplers for no hose interference on all jobs. Hands free operation. Manufactured with highest quality alloys. Push through square drive for quick change from loosen to tighten.
UEB 225-Piece O-Ring Washer Seals Assortment Kit Rubber Sealing Washer Air Rubber Hydraulic Tool Set
- 06″x1. 18″(approx) quantity 1 set (225 pieces) note due to the difference between different monitors, the picture may not reflect the actual color of the item. 2x2mm, 5x2mm, 6x2mm, 6×2. 5mm, 17×2. Please understand, thank you. Package included 1 x set rubber o ring. 07″x4. 5×10. Specification housing color black size types 18 20 pieces per size 3x1mm, 4x1mm, 4. 3x3cm/8. 5mm, 18x4mm, 20x2mm, 22x2mm material rubber box size (lwh) 20. 5mm, 6x3mm, 7x2mm, 8x2mm 5 pieces per size 9x2mm, 10x2mm, 12x2mm, 13x1mm, 14×2.
Cal Hawk CZORS 225 O-Ring Assortment Kit SAE Pneumatic Air Rubber Hydraulic Tool Set
- 3/8″ x 9/16″20-pc. 11/16″ x 7/8″5-pc. 5/8″ x 13/16″5-pc. 13/16″ x 1-1/16″5-pc. 3/32″ x 15/64″ 20-pc. 9/16″ x 3/4″5-pc. 1/2″ x 11/16″5-pc. 3/16″ x 5/16″20-pc. 7/16″ x 5/8″5-pc. Contents20-pc. 1/4″ x 3/8″20-pc. 7/32″ x 11/32″20-pc. 5/16″ x 7/16″20-pc. 5/8″ x 3/4″5-pc. 5/32″ x 9/32″20-pc. 1/8″ x 1/4″20-pc. 3/4″ x 15/16″5-pc. 3/8″ x 1/2″5-pc. 3/4″ x 1″.
Gowe® Manual hydraulic pump for driving hydraulic tools, Easy operate hand hydraulic pump 1800 cc
- Please see more specifications on the pictures, don’t buy others’ fakes only buy from gowe industrial can enjoy after-care service. 1 manual hydraulic pumps to drive crimping head, cutting heads and punch head. 2 two stages speed action for rapid ram advantage. 3 accessories including 2m high pressure hose and coupler plug p/t 3/8″ thread, oil must be changed half a year.
Current Tool 154PM 1/2-Inch to 4-Inch Piece Maker Hydraulic Knockout Set
- Piece maker punches split the slug into two pieces for easy removal from die. Reduces punch time versus manual or ratchet methods. 1/2-inch to 4-inch hydraulic knockout set. This unique hand pump is designed with heavy duty ram and is designed to punch a maximum of 10-gauge mild steel weight 54-pound. Fast to set up with high strength steel punches and dies for long life. Punch time is reduced versus manual or ratchet methods. Designed to split the slug in two pieces for easy removal and requires less force than conventional punches. Designed to punch a maximum of 10 gauge ( 134″ ) mild steel. Heavy duty plastic carrying case. Made in the usa.
15 Ton Hydraulic Metal Hole Puncher Press Driver Kit Tool Set with 5 Dies
- 976″(101mm), 4. 488″(114mm)). 504″ (89mm), 3. Brand new complete 15-ton hydraulic punch driver kit. 992″ (76mm), 3. It’s great for installing and repairing wire pipeline, signal lamp and instrument in metallurgy, petrol, electronics, electrical appliance,chemical industry, ship & machinery and many more. Features 5 dies & punches interchangeable to meet different needs plastic grip at the end of the long steel handle rotatable on / off switch for more safety easy seating with the brackets on the bottom of the hydraulic pump portable metal case for convenient travelingh metal clasps to lock the kit firmly laborsaving and fast operation accommodating more material stainless steel, aluminum, steel, plastic etc. Corresponding size actual hole size(2. 48″ (63mm), 2.
Mastercool (71700) Black Hydraulic Flaring and Swaging tool
- The mastercool 71700 hydraulic flaring & swaging tool can do it all. Comes in custom molded carrying case. (Patent no. Amid the current market expansion of mini-split systems and their need for accuracy, this tool takes the work out of swaging and flaring, especially on larger tube sizes. This kit includes dies and adapters for flaring and swaging copper tubing sizes 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ and 7/8″. 5,782,128). The power is in the hand-held hydraulic press that accurately flares and swages copper tubing, providing consistency every time.
582, HUCK, HYDRAULIC TOOL -20 C50L, , PACK OF 1
- Product> huck installation systems. Manual hydraulic pump hand operated hydraulic pump hydraulic oil pump can work with split unit hydraulic tools head 3300cc.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
