Lenox Tools 2996464CG Master-Grit Carbide Grit Hole Saw, 4-Inch or 102mm by Lenox Tools
- . Carbide grit hole saw cuts through a wide range of abrasive materialshole saw has a clean-cutting carbide grit edge that won’t snag or chip when cutting thin materialsuse the hole saw with a 2l or 7l standard arbor or a 2l snap-back arbor4-inch diameterheat resistant carbide teeth for long life in tile and stainless steel.
IVY Classic 26728 1-3/4-Inch Carbide Grit Edge Hole Saw, USA, 1/Card
- Made in usa, diameter 1-3/4-inch, cutting depth 1-inch. Use with ivy classic arbor 26600, arbor with carbide pilot bit. Cuts ceramic tile, marble and fiberglass. Slot in hole saw for easy plug removal. Continuous rim of carbide grit ensures smooth cutting.
IVY Classic 26628 1-3/4-Inch Carbide Grit Edge Hole Saw Kit, USA, 1/Card
- Continuous rim of carbide grit ensures smooth cutting. Slot in hole saw for easy plug removal. Cuts ceramic tile, marble, slate and fiberglass. Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit. Carbide grit hole saw made in usa, diameter 1-3/4-inch, cutting depth 1-inch.
Klein Tools 31611 6-7/8-Inch Diameter Carbide Grit Hole Saw
- Makes smooth cuts with minimal tear out. Cuts through drywall, ceiling tile, plaster/lathe, cement board, and wood. Long-lasting carbide grit won’t dull in abrasive materials. Grit design reduces the kick when starting a cut in plywood. 6-7/8-inch in diameter.
Greenlee 725-4-1/2 Carbide-Grit Hole Saw, 4-1/2-Inch by Greenlee
- Long-lasting tungsten carbide-grit delivers extremely clean, smooth cuts through tile, cement board, and other abrasive materialsperfect for cutting holes in quazite enclosure or hardy board siding for 3-0 box installationrugged construction for enduring performanceuse with greenlee arbors.
IVY Classic 26732 2-Inch Carbide Grit Edge Hole Saw, USA, 1/Card
- Made in usa, diameter 2-inch, cutting depth 1-inch. Continuous rim of carbide grit ensures smooth cutting. Use with ivy classic arbor 26600, arbor with carbide pilot bit. Slot in hole saw for easy plug removal. Cuts ceramic tile, marble and fiberglass.
Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8″ dia for 6 inch lights – fast cutting in drywall, CornHole, lath & plaster, Hardie board – easy plug removal, uses standard hole saw arbor adapter
- Cuts through drywall, plaster, cornhole board, fiber cement hardie board, stucco, acoustical tile, ceiling tile. Hard tungsten carbide grit edge for a long life in abrasive materials. Attaches to standard 5/8″-18 2-pin mount hole saw arbor and works with hole pro x-230+ adjustable hole cutter & shield kits. Continuous cutting edge for smooth cutting even in wood lath and plaster. Open back design for faster cut plug removal.
Disston GO36 57mm Carbide Grit Holesaw by Disston
- Disston go36 57mm carbide grit holesaw. Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit. Continuous rim of carbide grit ensures smooth cutting. Slot in hole saw for easy plug removal. Cuts ceramic tile, marble, slate and fiberglass.
Disston E0206011 2-1/4-Inch RemGrit Carbide Grit Hole Saws, 57mm
- Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting. Cuts extremely hard abrasive materials.
Disston E0206015 3-1/4-Inch RemGrit Carbide Grit Hole Saws, 83mm
- Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
LENOX 29966-66CG 4-1/8″ Carbide Grit Hole Saw
- Carbide grit edge will not snag or chip when cutting thin materials. Carbide grit hole saw. It will cut tough abrasive materials such as fiberglass, ceramic tile, laminates. Measures 4-1/8 inches diameter. Features a hard tungsten carbide grit cutting edge.
Disston E0206023 1-7/8-Inch RemGrit Carbide Grit Hole Saws, 48mm
- Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. . High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
Century Drill and Tool 5552 3-1/4-Inch Carbide Grit Hole Saw
- Extra deep 2-1/4-inch cutting depth. Use with f or g series arbor. Made from heat treated steel with a fused carbide grit cutting edge for a long useful tool life. Cuts smooth holes in ceramic tile porcelain concrete block brick drywall and fiberglass.
Disston E0206016 3-3/8-Inch RemGrit Carbide Grit Hole Saws, 86mm
- High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting. Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back.
IVY Classic 26632 2-Inch Carbide Grit Edge Hole Saw Kit, USA, 1/Card
- Continuous rim of carbide grit ensures smooth cutting. Slot in hole saw for easy plug removal. Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit. Carbide grit hole saw made in usa, diameter 2-inch, cutting depth 1-inch. Cuts ceramic tile, marble, slate and fiberglass.
Hitachi 728791C 2-Inch Carbide Grit for Hole Saw (Discontinued by Manufacturer)
- Bites through tough materials. 2-inch carbide grit. Made of durable carbide. Comes with a 30-day limited warranty. Retains its form after repeated use.
ITM CG0092 Carbide Grit Hole Saw (1 Pack), 5-3/4″
- Itm or international tool manufacturing offers world class solutions for industrial drilling and cutting applications. With over 4,000 available items and 30% are made in the usa, itm focuses on performance and quality. Proven reliable testing by experts in design, innovation and manufacturing have made itm a global leader since 1987.
Lenox Tools 2995858CG Master-Grit Carbide Grit Hole Saw, 3-5/8-Inch or 92mm
- Clean cutting- carbide grit edge will not snag or chip when cutting thin materials. Lenox 58cg specifications diameter 3-5/8″ pipe tap pipe entrance 3″ use arbor 2l or 7l best for cutting abrasive materialslenox 58cg features cuts abrasive materials-super hard tungsten carbide grit cuts through fiberglass, ceramic, tile, laminates and other abrasive materials.
LENOX Plumber’s Carbide Grit Hole Saw Kit, 9 Piece
- Hard tungsten carbide grit cuts through fiberglass, ceramic tile, laminates, and other abrasive materials. Cuts abrasive materials quickly. Kit contains 3/4″, 7/8″, 1-1/8″, 1-1/2″, 2-1/8″, 2-9/16″ holes saws 2l 1/2″ and 1l 1/2″ standard arbors, and one arbor adaptor. Solid back design collects dust and debris. Carbide grit edge will not snag or chip when cutting thin materials. Carbide grit provides smooth cutting.
8pc Tungsten-Carbide Grit Hole Saw Cutter Kit Masonry ceramic plastic fiberboard
- 8pc tungsten-carbide grit hole saw cutter kit masonry ceramic plastic fiberboard this item features -fit on drill 500rpm, driver depth 55mm -included locating plate pilot drill file 10″ (250mm) -5 hole-saws (1-1/4″, 2-1/8″, 2-5/8″, 2-7/8″, 3-1/4″) -self sharpening hole saw for long time use -will cut through ceramic, plastic, fiberboard, fiberglass, concrete bock, and plywood -a must have too for cutting standard faucet and shower head pipe holes in tile. .
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
