20 Most Wanted Npt Pipe Taps

 

Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap Uncoated Bright Finish Round with Square End Shank 34-14 NPT Pack of 1

Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/4″-14 NPT (Pack of 1)

Drill America DWTPT Series Qualtech Carbon Steel Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/4″-14 NPT (Pack of 1) - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Round shank with square end.

 

NOS 15990 116 NPT Pipe Tap

NOS 15990 1/16 NPT Pipe Tap

NOS 15990 1/16 NPT Pipe Tap - Tap is included in fogger kits. Use a 1/4″ drill for starter hole. Required to install all nos fogger nozzles into a manifold. Designed for 1/16″ npt fogger nozzles.

 

Triumph Twist Drill 71252 38--18 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated

Triumph Twist Drill 71252 3/8–18 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated

Triumph Twist Drill 71252 3/8–18 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated - High speed steel. Npt pipe tap taper style. Made in the usa. Recommended drill size is 9/16 to be used without reaming. Bronze oxide.

 

CMT 2 - 11-12 NPT PIPE TAP 88-0200

CMT 2″ – 11-1/2 NPT PIPE TAP 88-0200

CMT 2″ – 11-1/2 NPT PIPE TAP 88-0200 - Cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped available in national pipe taper (npt) ideal for pipe fittings specifications cuts intragroup threads in pipes 2″, 11-1/2 npt nominal sizing of the tap is the sizing of the pipe meet existence abroach thread standard = npt no. Of flutes = 6 outside cutting direction = right style = taper applicable materials = most metals material = high carbon steel.

 

Triumph Twist Drill 71257 1-12-11-12 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated

Triumph Twist Drill 71257 1-1/2-11-1/2 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated

Triumph Twist Drill 71257 1-1/2-11-1/2 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated - Made in the usa. Bronze oxide. Npt pipe tap taper style. Recommended drill size is 1-23/32 to be used without reaming. High speed steel.

 

Cleveland C64103 10000 964 High Speed Steel Straight with Square Interrupted Thread Medium Hook NPT Pipe Tap

Cleveland C64103, 1.0000″ 964 High Speed Steel Straight with Square Interrupted Thread Medium Hook NPT Pipe Tap

Cleveland C64103, 1.0000″ 964 High Speed Steel Straight with Square Interrupted Thread Medium Hook NPT Pipe Tap - Cmt 1-1/2, 115 npt pipe tap 88-0112. 3-inch- 8 tap size. Quantity 1 per pack. 2-5/8-inch flute length, 8 flutes. Designed to produce threads where mated parts are not required to withstand high fluid and gas pressures.

 

Cleveland C64045 15000 965 High Speed Steel Straight with Square Medium Hook Taper NPT Pipe Tap

Cleveland C64045, 1.5000″ 965 High Speed Steel Straight with Square Medium Hook Taper NPT Pipe Tap

Cleveland C64045, 1.5000″ 965 High Speed Steel Straight with Square Medium Hook Taper NPT Pipe Tap - Cmt 1-1/2, 115 npt pipe tap 88-0112. Quantity 1 per pack. Designed to produce threads where mated parts are not required to withstand high fluid and gas pressures. 3-inch- 8 tap size. 2-5/8-inch flute length, 8 flutes.

 

Tools NPT Pipe Tap T41003

Tools NPT Pipe Tap T41003

Tools NPT Pipe Tap T41003 - Pipe tap 6-piece set in wood case. 3/8″ pipe tap. Made of high carbon steel. 3/4″ pipe tap. 1″ pipe tap.

 

DWT64008 12-14 HSS NPT Pipe Taps

DWT64008 1/2″-14 HSS NPT Pipe Taps

DWT64008 1/2″-14 HSS NPT Pipe Taps - Npt threads require the use of a sealer like teflon tape or pipe compound. The thread tapers 3/4 of an inch per foot. General purpose pipe taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap.

 

CMT 18 - 27 NPT PIPE TAP 88-0018

CMT 1/8″ – 27 NPT PIPE TAP 88-0018

CMT 1/8″ – 27 NPT PIPE TAP 88-0018 - Of flutes = 4 outside cutting direction = right style = taper applicable materials = most metals material = high carbon steel. Cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped available in national pipe taper (npt) ideal for pipe fittings specifications cuts intragroup threads in pipes 1/8″, 27 npt nominal sizing of the tap is the sizing of the pipe meet existence abroach thread standard = npt no.

 

Tools NPT Pipe Tap T41007

Tools NPT Pipe Tap T41007

Tools NPT Pipe Tap T41007 - Made of high carbon steel. Pipe tap 6-piece set in wood case. 3/8″ pipe tap. 1/8″ pipe tap lead seal. 1-1/2″ pipe tap.

 

Tools NPT Pipe Tap T41006

Tools NPT Pipe Tap T41006

Tools NPT Pipe Tap T41006 - Made of high carbon steel. 1/2″ pipe tap. 1″ pipe tap. Pipe tap 6-piece set in wood case. 3/4″ pipe tap.

 

Alfa Tools HSNPT270314 4-8 HSS NPT Pipe Tap

Alfa Tools HSNPT270314 4-8″ HSS NPT Pipe Tap

Alfa Tools HSNPT270314 4-8″ HSS NPT Pipe Tap - Used for tapping pipe and pipe fittings. Alfa tools high speed steel eco pro usa npt pipe tap. Designed to produce threads where mated parts are not required to withstand high fluid and gas pressures, and where the use of a sealing compound or tape may be used to produce leak-proof threads.

 

IRWIN HANSON 359010 116 4F HSGT NPT PIPE TAP

IRWIN HANSON 359010 1/16 4F HSGT NPT PIPE TAP

IRWIN HANSON 359010 1/16 4F HSGT NPT PIPE TAP - Designed to produce threads where mated parts are not required to withstand high fluid and gas pressures. 2-5/8-inch flute length, 8 flutes. 3-inch- 8 tap size. Quantity 1 per pack. Cmt 1-1/2, 115 npt pipe tap 88-0112.

 

ITM NPT6464 1 NPT Pipe Tap Carbon 1 Pack

ITM NPT6464 1″ NPT Pipe Tap Carbon (1 Pack)

ITM NPT6464 1″ NPT Pipe Tap Carbon (1 Pack) - Itm or international tool manufacturing offers world class solutions for industrial drilling and cutting applications. Proven reliable testing by experts in design, innovation and manufacturing have made itm a global leader since 1987. With over 4,000 available items and 30% are made in the usa, itm focuses on performance and quality.

 

Drill America DWT Series Qualtech High-Speed Steel Special Purpose Interrupted Thread Pipe Tap Uncoated Bright Finish Round with Square End Shank 34-14 NPT Pack of 1

Drill America DWT Series Qualtech High-Speed Steel Special Purpose Interrupted Thread Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/4″-14 NPT (Pack of 1)

Drill America DWT Series Qualtech High-Speed Steel Special Purpose Interrupted Thread Pipe Tap, Uncoated (Bright) Finish, Round with Square End Shank, 3/4″-14 NPT (Pack of 1) - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shank with square end. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

CMT 1 - 115 NPT PIPE TAP 88-0010

CMT 1″ – 11.5 NPT PIPE TAP 88-0010

CMT 1″ – 11.5 NPT PIPE TAP 88-0010 - Of flutes = 4 outside cutting direction = right style = taper applicable materials = most metals material = high carbon steel. Cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped available in national pipe taper (npt) ideal for pipe fittings specifications cuts intragroup threads in pipes 1″, 11. 5 npt nominal sizing of the tap is the sizing of the pipe meet existence abroach thread standard = npt no.

 

Tools NPT Pipe Tap T41002

Tools NPT Pipe Tap T41002

Tools NPT Pipe Tap T41002 - 3/4″ pipe tap. 1/2″ pipe tap. Pipe tap 6-piece set in wood case. Made of high carbon steel. 1/4″ pipe tap.

 

CMT 12 - 14 NPT PIPE TAP 88-0012

CMT 1/2″ – 14 NPT PIPE TAP 88-0012

CMT 1/2″ – 14 NPT PIPE TAP 88-0012 - Of flutes = 4 outside cutting direction = right style = taper applicable materials = most metals material = high carbon steel. Cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped available in national pipe taper (npt) ideal for pipe fittings specifications cuts intragroup threads in pipes 1/2″, 14 npt nominal sizing of the tap is the sizing of the pipe meet existence abroach thread standard = npt no.

 

Triumph Twist Drill 71250 18-27 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated

Triumph Twist Drill 71250 1/8-27 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated

Triumph Twist Drill 71250 1/8-27 NPT T65HD High Speed Steel NPT Pipe Tap Thundertap Bronze Oxide Coated - Made in the usa. High speed steel. Recommended drill size is letter q to be used without reaming. Bronze oxide. Npt pipe tap taper style.