POWERTEC QTI1002 Threaded Inserts for Wood Furniture | Zinc Plated | 1/4″-20 Internal Threads | 11.9mm Length – Pack of 50
- Versatile although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as cherry, maple, mahogany, oak and walnut. Includes (50 pack) 1/4-20 threaded inserts (also referred to as insert nuts). Function primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out. Specs zinc plated, machine thread, internal threads 1/4″-20, total length 0 468″(11 9mm). Easy to use simply install with a screwdriver or optional drive tool, powertec 71383(not included) after drilling the appropriately sized hole. Material type zinc plated
wood.
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 3/8″-24 Internal Threads, 1/2″-13 External Threads, 0.500″ Length, Made in US (Pack of 10)
- Self locking preapplied adhesive activates upon installation and is fastener-ready in 3-5 minutes. Ideal for soft metals like aluminum, cast iron, or magnesium. Easy to use solution for repairing damaged threads in metal. Install with standard drill & tap no special tools needed. Strong, solid construction design.
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, M8-1.25 Internal Threads, 20mm Length (Pack of 25)
- Simply drill the appropriately sized hole and install with hex key or optional drive tool. Tapered external threads resist pull-out caused by vibration. Provides a strong machine thread in soft woods. Designed for use in applications such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates. Ideal for use in pine, plywood, composition board, and mdf.
INTERTOOL Spray Gun Cup Internal Thread М16х1.5 PT-1901
- The level of paint is clearly visible through the semitransparent plastic of the body, which is sturdy, durable, and solvent-resistant while easy to clean. During operation, there is no need to stop and remove the cup every time you need to check the amount of paint. 5 female thread, it fits most hvlp, hp, lvmp and lvlp spray guns. This cup is an ideal replacement for old and worn top-connection spray gun cups. Thanks to the М16х1. The top of the cup is tightly sealed with a threaded lid, so the paint won’t spill even when painting ceilings or other objects that require painting in a tilted position.
E-Z Lok Threaded Inserts For Metal; Assortment Kit; Carbon Steel; Heavy Wall; UNC Internal Threads, 10-24, 1/4-20, 5/16-18, 3/8-16, 1/2-13; 46 pieces
- Packaged in a case with a compartment for each of five different sizes 10-24, 1/4-20, 5/16-18, 3/8-16, and 1/2-13. 46-piece set of solid, heavy wall, carbon steel, self-locking, unified coarse thread inserts for use in metal. Self-locking with pre-applied loctite on the external threads that is ready to use in 3-5 minutes and seals against liquids and gases to 6,000 psi when fully cured (72 hours after installation). Inserts fit holes made with standard drill and tap tools, and install with a flathead screwdriver or bolt and jam nut (installation hardware sold separately). Aisi 12l14 carbon steel is cold drawn for better tolerance and strength than hot rolled steel.
E-Z Lok Externally Threaded Insert, 303 Stainless Steel, M6-1.0 Internal Threads, M10x1.5 External Threads, 10.49mm Length, Made in US (Pack of 5)
- Corrosion resistant. Easy to use solution for repairing damaged threads in metal. Ideal for soft metals like aluminum, cast iron, or magnesium. Install with standard drill & tap no special tools needed. Self locking preapplied adhesive activates upon installation and is fastener-ready in 3-5 minutes.
E-Z Lok Externally Threaded Insert, 303 Stainless Steel, 1/2″-13 Internal Threads, 3/4″-10 External Threads, 0.656″ Length, Made in US (Pack of 5)
- Made of 303 stainless steel for improved corrosion resistance. Install with standard drill & tap no special tools needed. Self locking preapplied adhesive activates upon installation and is fastener-ready in 3-5 minutes. Ideal for soft metals like aluminum, cast iron, or magnesium. Easy to use solution for repairing damaged threads in metal.
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4″-20 Internal Threads, 0.500″ Length (Pack of 25)
- Threaded insert, brass, knife thread, 1/4″-20 internal threads, 0 500″ length (pack of 25). Simply drill the appropriately sized hole and install with bolt/jam nut or optional drive tool. Provides a strong machine thread in hard woods. Designed for use in furniture, cabinetry, storm windows and tap handles. Ideal for use in woods like oak, cherry, and maple.
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, #10-32 Internal Threads, 13mm Length (Pack of 50)
- Ideal for use in pine, plywood, composition board, and mdf. Provides a strong machine thread in soft woods. Simply drill the appropriately sized hole and install with hex key or optional drive tool. Designed for use in applications such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates. Tapered external threads resist pull-out caused by vibration.
uxcell 50pcs M6x19mm Threaded Insert Nuts Zinc Alloy Hex Socket M6 Internal Threads 19mm Length
- Tapered external threads resist pull-out caused by vibration. Provides a strong machine thread in soft woods. Ideal for use in pine, plywood, composition board, and mdf. Designed for use in applications such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates. Simply drill the appropriately sized hole and install with hex key or optional drive tool.
E-Z Lok Threaded Inserts For Metal; Assortment Kit; Carbon Steel; Metric Internal Threads, M3-0.5, M4-0.7, M5-0.8, M6-1.0, M8-1.25; 50 pieces
- Aisi 12l14 carbon steel is cold drawn for better tolerance and strength than hot rolled steel. 50-piece set of solid, heavy wall, carbon steel, self-locking, metric coarse thread inserts for use in metal. Packaged in a case with a compartment for each of five different sizes m3-05, m4-07, m5-08, m6-10, and m8-125. Inserts fit holes made with standard drill and tap tools, and install with a flathead screwdriver or bolt and jam nut (installation hardware sold separately). Self-locking with pre-applied loctite on the external threads that is ready to use in 3-5 minutes and seals against liquids and gases to 6,000 psi when fully cured (72 hours after installation).
ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads
- Sizes metric taps 3×05, 4×07, 5×08, 6×10, 7×10, 8×125, 9×125, 10×10, 10×15, 12×175 unc taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2 unf taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2 metric dies 3×05, 4×07, 5×08, 6×10, 7×10, 8×125, 9×125, 10×10, 10×15, 12×175 unc dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2 unf dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2 npt tap 1/8-27 npt die 1/8-27 tap wrench m4-m12 3/16-1/2″ t-type tap wrench m3-m16 1/16-1/4″. Contents package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4″-28 to 1/2″-20, 1/8″-27 npt tap and die, metric tap and dies from m3x05 to m12x175, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience. Cut and renew threads the abn metric and sae standard tap and die 60-piece rethread set rethreading kit for cutting external and internal threads is a comprehensive set for cutting and renewing external and internal threads to exact standards. Easy storage heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Built to last constructed from hardened alloy steel for maximum strength and longevity can cut materials such as cast iron, steel, aluminum, copper.
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 1/2″-20 Internal Threads, 5/8″-11 External Threads, 0.625″ Length, Made in US (Pack of 5)
- Install with standard drill & tap no special tools needed. Easy to use solution for repairing damaged threads in metal. Strong, solid construction design. Self locking preapplied adhesive activates upon installation and is fastener-ready in 3-5 minutes. Ideal for soft metals like aluminum, cast iron, or magnesium.
Powers Fastening Innovations 06335 Mini-Dropin – 1/4-Inch Internal Thread Carbon Steel Mini Drop in Expansion Anchor, 100 Per Box
- Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921.
OriGlam 20pcs Alloy Steel SAE, Tap and Die Set, Metric Standard Tap and Die, SAE Thread Tool, Essential Threading Home Tool Cutting Threads for Cutting External and Internal Threads
- √ excellent cutting performance, all cutting teeth are precisely cnc machined and accurately heat treated to rockwell hardness 60 hrc for best threading performance. √ Widely use, it is suitable for thread processing of carbon steel, cast iron, aluminum, brass, copper, stainless steel and other metals ideal for rethreading fasteners and fastener holes for auto and machinery repair. √ Built to last, constructed from hardened alloy steel for maximum strength and longevity can cut materials such as cast iron, steel, aluminum, copper. √ All included set, this kit comes with a full range of most popular sae taps & dies with both coarse and fine sizes, plus all needed wrenches, handles, a gauge and a storage case. √ Versatility and wide application, perfect to create new threads or repair damaged threads on plastic, aluminium a good tool for home, backyard, garage mechanic.
E-Z Lok Threaded Insert, Zinc, Hex-Flush, #8-32 Internal Threads, 10mm Length (Pack of 100)
- Designed for use in applications such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates. Ideal for use in pine, plywood, composition board, and mdf. Provides a strong machine thread in soft woods. Tapered external threads resist pull-out caused by vibration. Simply drill the appropriately sized hole and install with hex key or optional drive tool.
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14/Metric, M10-1.25 Internal Threads, 9/16″-12 External Threads, 13.08mm Length, Made in US (Pack of 10)
- Easy to use solution for repairing damaged threads in metal. Self locking preapplied adhesive activates upon installation and is fastener-ready in 3-5 minutes. Strong, solid construction design. Install with standard drill & tap no special tools needed. Ideal for soft metals like aluminum, cast iron, or magnesium.
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, #8-32 Internal Threads, 10mm Length (Pack of 100)
- Tapered external threads resist pull-out caused by vibration. Ideal for use in pine, plywood, composition board, and mdf. Simply drill the appropriately sized hole and install with hex key or optional drive tool. Provides a strong machine thread in soft woods. Designed for use in applications such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates.
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 7/16″-14 Internal Threads, 5/8″-11 External Threads, 0.656″ Length, Made in US (Pack of 5)
- Install with standard drill & tap no special tools needed. Ideal for soft metals like aluminum, cast iron, or magnesium. Self locking preapplied adhesive activates upon installation and is fastener-ready in 3-5 minutes. Easy to use solution for repairing damaged threads in metal. Strong, solid construction design.
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 3/8″-16 Internal Threads, 1/2″-13 External Threads, 0.500″ Length, Made in US (Pack of 10)
- Self locking preapplied adhesive activates upon installation and is fastener-ready in 3-5 minutes. Install with standard drill & tap no special tools needed. Ideal for soft metals like aluminum, cast iron, or magnesium. Strong, solid construction design. Easy to use solution for repairing damaged threads in metal.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
