20 Greatest Patch Fittings

 

Polished Stainless Left Offset Sidelite Mounted Transom Patch Fitting

Polished Stainless Left Offset Sidelite Mounted Transom Patch Fitting

Polished Stainless Left Offset Sidelite Mounted Transom Patch Fitting - Color polished stainlessglass thickness 3/8 or 1/2 in (10 or 12 mm)hand lh/rhrfor 3/8″ or 1/2″ (10 or 12. 7 mm) glass- template and instructionsspecificationsfor use with- 0pf20r and 0pf20l- top door patches glass fabrication requiredthree 3/4″ (19 mm) diameterholes and corner notchcomes with template and instructions. Includes- high density cast body- cover plates (finish of your choice)- gasket for 3/8″ or 1/2″ (10 or 12. It will also work with other offset patch fittings. Allowing for a full 180 degree door swing, these fittings are available for right or left hand configurations, in your choice of brushed or polished stainless steel. 7 mm) glassallows for 180 degree door swingleft and right handed also works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterationsthe crl sidelite mounted transom offset patch fitting is specifically designed to work with offset arm bottom door rails, with no alterations required.

 

CR LAURENCE PH20AA CRL Aluminum Top Door Patch Fitting With 1NT303 Insert

C.R. LAURENCE PH20AA CRL Aluminum Top Door Patch Fitting With 1NT303 Insert

C.R. LAURENCE PH20AA CRL Aluminum Top Door Patch Fitting With 1NT303 Insert - C. It fits in the upper corner of the gate”s glass panel, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template. R. Crl top gate patch fittings are used with all three of our gate and door pivots. Laurence ph20aa crl satin anodized top door patch fitting with 1nt303 insert.

 

CRL Brass EUR Series Top or Bottom Patch Fitting - Less Insert by CR Laurence

CRL Brass EUR Series Top or Bottom Patch Fitting – Less Insert by CR Laurence

CRL Brass EUR Series Top or Bottom Patch Fitting – Less Insert by CR Laurence - Glass fabrication required one corner notchincludeshigh density cast bodycover plates (finish of your choice)gaskets for 3/8 or 1/2 inch (10 or 12 millimeter)template and instructionsimportant notesthe following guidelines are the be used when making a door using this hardware. Maximum height 120″ (3050mm)maximum weight 176 lbs (80kg)maximum width 43″ (1100mm)if the door exceeds any of these limitations, full door rails should be used. Color brassfor use with eur series top and bottom insertshigh density cast body with lock mechanismgaskets for use with 3/8″ or 1/2″ glassthis crl eur series patch fitting (less fitting) will allow you to use the same fitting for either top or bottom by simply installing the appropriate insert.

 

Brass Patch Fitting Replacement Cover Plate for PH34

Brass Patch Fitting Replacement Cover Plate for PH34

Brass Patch Fitting Replacement Cover Plate for PH34 - These plates also allow the finish to be changed when remodeling without removing the main patch body. Color brassfor ph34 wall mounted transom patch fittingsthese crl replacement cover plates for commercial patch fittings are intended as replacements for damaged cover plates on existing installations that used ph34 wall mounted transom patch fittings. Includes 1 set of two cover plates.

 

NHN Model PDC100-S SSS - Hydraulic Self Closing Pivot Door Closer for Glass Door Patch Fitting hold open 90degree No Digging Floor

NHN Model: PDC100-S SSS – Hydraulic Self Closing Pivot Door Closer for Glass Door (Patch Fitting) (hold open 90degree) No Digging Floor

NHN Model: PDC100-S SSS – Hydraulic Self Closing Pivot Door Closer for Glass Door (Patch Fitting) (hold open 90degree) No Digging Floor - Supplied non handed the nhn pdc100 provides optimum efficiency with quick and easy installation. Finishes available as standard are satin and polished stainless steel. Hold open model suitable for a glass door 5/16-1/2inch thick, 30-393inch wide and a maximum weight of 220lbs. Ambient temperature -4f + 122f. Simple final adjustments.

 

Brass PTH Series Top Transom Door Stop Patch Fitting

Brass PTH Series Top Transom Door Stop Patch Fitting

Brass PTH Series Top Transom Door Stop Patch Fitting - Color brassfor use with 3/8″ (10 mm) or 1/2″ (12 mm) thick glassmolded body and finished cover platescrl pth series top transom door stop patch fitting includes molded body, stop insert, finished cover plate, and gaskets for 3/8″ and 1/2″ (10 or 12 mm) glass. Glass fabrication requiredone notch (template included). This fitting is installed on strike side of transom to stop a door.

 

Black Bronze Top Door Patch Fitting With INT303 Insert

Black Bronze Top Door Patch Fitting With INT303 Insert

Black Bronze Top Door Patch Fitting With INT303 Insert - Color black bronze2-9/16″ (65 mm) pivot setbackhigh density cast bodyfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32″ (15 mm) diameter type pivots. (80 kg)maximum width 43″ (1110 mm)if the door exceeds any of these limitations, full door rails should be used. Finished covers are available in four standard finishes. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass. The following guidelines are to be used when making a door using this hardwaremaximum height 108″ (2744 mm)maximum weight 176 lbs.

 

CRL Brushed Stainless Finish Curved Top Door Patch Fitting with INT303 Insert

CRL Brushed Stainless Finish Curved Top Door Patch Fitting with INT303 Insert

CRL Brushed Stainless Finish Curved Top Door Patch Fitting with INT303 Insert - The crl curved top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32 inch (15 millimeter) diameter type pivots. . Gaskets are supplied that allow this patch fitting to be used with either 3/8 or 1/2 inch (10 or 12 millimeter) glass.

 

CRL Aluminum Finish Ceiling Mounted Support Fin Bracket Patch Fitting

CRL Aluminum Finish Ceiling Mounted Support Fin Bracket Patch Fitting

CRL Aluminum Finish Ceiling Mounted Support Fin Bracket Patch Fitting - Capacity 10-12mm thick glass. For 3/8″ or 1/2″ (10 or 12 mm) glass. Prefectly fit with glass door to create a spacious and bright modern life and work environment. Use the excellent stainless steel. Finish chrome plated.

 

Brass Ceiling Mounted Support Fin Bracket Patch Fitting

Brass Ceiling Mounted Support Fin Bracket Patch Fitting

Brass Ceiling Mounted Support Fin Bracket Patch Fitting - The support fin glass should be sized to approved design criteria(refer to gana or manufacturer’s manual). Glass fabrication requiredtwo 3/4″ (19 mm) diameter holescomes withtemplate and instructionsimportant notesnote these fitting are not for use with laminated glass. Color brassfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl ceiling mounted support fin bracket is used to secure glass support fins to the ceiling.

 

Polished Stainless Curved Top Door Patch Fitting with 1NT303 Insert

Polished Stainless Curved Top Door Patch Fitting with 1NT303 Insert

Polished Stainless Curved Top Door Patch Fitting with 1NT303 Insert - The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591mm)maximum weight 194 lbs (88kg)maximum width 42″ (1092mm)if the door exceeds any of these limitations, full door rails should be used. Glass fabrication requiredone 3/4″ (19 mm) diameter hole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass. Color polished stainless2-11/16″ (68 mm) pivot setbackfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl curved top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32″ (15 mm) diameter type pivots. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass.

 

Aluminum Top Door Patch Fitting with 1NT304 Insert

Aluminum Top Door Patch Fitting with 1NT304 Insert

Aluminum Top Door Patch Fitting with 1NT304 Insert - Color aluminumfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl top door patch fitting includes the 1nt304 insert for use with our overhead concealed door closers that have a 9/16 inch (14 millimeter) square and 3/4 inch (19 millimeter) long spindle. Glass fabrication required one 3/4 inch (19 millimeter) diameter hole and corner notch. Important notesthese fittings are not for use with laminated glass. Finished covers are available in five standard finishes. The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591mm)maximum weight 194 lbs (88kg)maximum width 42″ (1092mm)if the door exceeds any of these limitations, full door rails should be used. Gaskets are supplied that allow this patch fitting to be used with either 3/8 or 1/2 inch (10 or 12 millimeter) glass.

 

Polished Stainless Right Offset Sidelite Mounted Transom Patch Fitting

Polished Stainless Right Offset Sidelite Mounted Transom Patch Fitting

Polished Stainless Right Offset Sidelite Mounted Transom Patch Fitting - It will also work with other offset patch fittings. Allowing for a full 180 degree door swing, these fittings are available for right or left hand configurations, in your choice of brushed or polished stainless steel. Color polished stainlessglass thickness 3/8 or 1/2 in (10 or 12 mm)hand rh/lhrfor 3/8″ or 1/2″ (10 or 12. Includes- high density cast body- cover plates (finish of your choice)- gasket for 3/8″ or 1/2″ (10 or 12. 7 mm) glassallows for 180 degree door swingleft and right handed also works with crl 3/4″ (19 mm) offset arm bottom door rails with no alterationsthe crl sidelite mounted transom offset patch fitting is specifically designed to work with offset arm bottom door rails, with no alterations required. 7 mm) glass- template and instructionsspecificationsfor use with- 0pf20r and 0pf20l- top door patches glass fabrication requiredthree 3/4″ (19 mm) diameterholes and corner notchcomes with template and instructions.

 

CRL Brushed Stainless Top Door Patch Fitting with Pivot Insert by CR Laurence

CRL Brushed Stainless Top Door Patch Fitting with Pivot Insert by CR Laurence

CRL Brushed Stainless Top Door Patch Fitting with Pivot Insert by CR Laurence - The following guidelines are to be used when making a door using this hardwaremaximum height 102″ (2591 mm)maximum weight 194 lbs. (88 kg)maximum width 42″ (1092 mm)if the door exceeds any of these limitations, full door rails should be used. Glass fabrication requiredone 3/4″ (19 mm) diameter hole and corner notchcomes withtemplate and instructions. It fits in the upper corner of the gate’s glass panel, and requires a hole and cut-out in the glass. Available in brushed and polished stainless steel finishes. Color brushed stainlessfor 3/4″ (19 mm) glass304 alloy stainless steel covers2-3/4″ (70 mm) pivot setbackcrl top gate patch fittings are used with all three of our gate and door pivots.

 

Brass Patch Fitting Replacement Cover Plate for PH40

Brass Patch Fitting Replacement Cover Plate for PH40

Brass Patch Fitting Replacement Cover Plate for PH40 - Includes 1 set of two cover plates. Color brassfor ph40 sidelite mounted transom patch fittingsthese crl replacement cover plates for commercial patch fittings are intended as replacements for damaged cover plates on existing installations that used ph40 sidelite mounted transom patch fittings. These plates also allow the finish to be changed when remodeling without removing the main patch body.

 

uxcell Metal L Shape Frameless Glass Door Clamp Mirror Clip Patch Fitting

uxcell Metal L Shape Frameless Glass Door Clamp Mirror Clip Patch Fitting

uxcell Metal L Shape Frameless Glass Door Clamp Mirror Clip Patch Fitting - Overall size 220 x 105 x 27mm / 866″ x 413″ x 1″(lwh). Main color silver tone. Package content 1 x glass door clamp weight 1231g. Fit for glass thickness 10mm -12mm / 04″-047″. Material metal product name glass door clamp.

 

UHPPOTE Top Clip Clamp Patch Fitting for 12mm  047inch Frameless Glass Door

UHPPOTE Top Clip Clamp Patch Fitting for 12mm / 0.47inch Frameless Glass Door

UHPPOTE Top Clip Clamp Patch Fitting for 12mm / 0.47inch Frameless Glass Door - Features finish chrome plated material of lock inner core stainless steel material of subject die casting capacity 10-12mm thick glass size 164x51x30mm weight 0. 65kg package 1 x upper clip. Prefectly fit with glass door to create a spacious and bright modern life and work environment. Description patch fitting is with great function and nice shape, use the excellent stainless steel.

 

Polished Stainless Top Door Patch Fitting with 1NT303 Insert

Polished Stainless Top Door Patch Fitting with 1NT303 Insert

Polished Stainless Top Door Patch Fitting with 1NT303 Insert - (80 kg)maximum width 43″ (1110 mm)if the door exceeds any of these limitations, full door rails should be used. Finished covers are available in four standard finishes. Gaskets are supplied that allow this patch fitting to be used with either 3/8″ or 1/2″ (10 or 12 mm) glass. Color polished stainless2-9/16″ (65 mm) pivot setbackhigh density cast bodyfor 3/8″ or 1/2″ (10 or 12 mm) glassthe crl top door patch fitting includes the 1nt303 insert for use with our crl9040wbp top walking beam pivot, 1nt401 surface mount top pivot, 1nt405 threaded top pivot, or other 19/32″ (15 mm) diameter type pivots. The following guidelines are to be used when making a door using this hardwaremaximum height 108″ (2744 mm)maximum weight 176 lbs. Glass fabrication requiredone 3/4″ (19 mm) diameterhole and corner notchcomes withtemplate and instructionsimportant notesthese fittings are not for use with laminated glass.

 

UHPPOTE Upper Clip Clamp Patch Fitting for 12mm  047 inch Frameless Glass Door

UHPPOTE Upper Clip Clamp Patch Fitting for 12mm / 0.47 inch Frameless Glass Door

UHPPOTE Upper Clip Clamp Patch Fitting for 12mm / 0.47 inch Frameless Glass Door - Description/b> patch fitting is with great function and nice shape, use the excellent stainless steel. Prefectly fit with glass door to create a spacious and bright modern life and work environment. Features finish chrome plated material of lock inner core stainless steel material of subject die casting capacity 10-12mm thick glass size 164x51x30mm weight 0. 6kg package 1 x upper clip.

 

Polished Stainless PTH Series Top Door Patch Fitting

Polished Stainless PTH Series Top Door Patch Fitting

Polished Stainless PTH Series Top Door Patch Fitting - This fitting is commonly used with either a pth23 top transom pivot, crl9040wbp walking beam pivot, 1nt401 top free swinging pivot, or 1nt405 header mount top pivot. Color polished stainlessa complete selection for single or double doors, transoms, and sidelites fittingsfor 3/8″ or 1/2″ (10 or 12 mm) glassavailable in two finishesthis crl pth series top door patch fitting includes a high density cast body, pivot socket, finished cover plate, and gaskets for 3/8″ and 1/2″ (10 and 12 mm) glass. Glass fabrication requiredtwo 13/16″ (20 mm) diameter holes and one notch (template included)for use withpth23 top transom pivot crl9040wbp walking beam pivot 1nt401 top free-swinging pivot 1nt405 header mount top pivot.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.