20 Coolest Torx Bit Sockets in 2020

 

TEKTON 38 Drive x T30 Long Torx Bit Socket  SHB14430

TEKTON 3/8″ Drive x T30 Long Torx Bit Socket | SHB14430

TEKTON 3/8″ Drive x T30 Long Torx Bit Socket | SHB14430 - Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin. Extra-long bits allow you to reach deep into especially narrow, recessed areas. S2 steel bit is press-fit into the socket for a straight, permanent connection that can’t loosen over time. Star-shaped torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out. Large, clear die-stamped size marking is easy to read and can’t wear off.

 

uxcell 12-Inch Drive T35 Torx Bit Socket S2 Steel 55mm Length

uxcell 1/2-Inch Drive T35 Torx Bit Socket S2 Steel 55mm Length

uxcell 1/2-Inch Drive T35 Torx Bit Socket S2 Steel 55mm Length - Precise size chamfered ends insert smoothly into fastener head, reducing wear. Material made of s2 alloy steel, withstand high torque and do not twist, protecting both the bit and the fastener. Fit for notched drive ends fit any 1/2-inch drive ratchet or extension, preventing them from falling off. High hardness hardness can be arrived at 58hrc, strong and durable for use. Size 1/2-inch drive, t35 torx size, 55mm total length.

 

SK Hand Tools 84209 10Piece 14 38 Drive Torx Bit Socket Set

SK Hand Tools 84209 10Piece 1/4″ & 3/8″ Drive Torx Bit Socket Set

SK Hand Tools 84209 10Piece 1/4″ & 3/8″ Drive Torx Bit Socket Set - Superkrome finish provides long life and maximum corrosion resistance. High strength, s2 steel bits. New bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working. Lifetime warranty. Through-hole design simply pop the old bit out and insert a new replacement bit.

 

CRAFTSMAN Torx Bit Socket Set 12-Inch Drive 7-Piece CMMT50839

CRAFTSMAN Torx Bit Socket Set, 1/2-Inch Drive, 7-Piece (CMMT50839)

CRAFTSMAN Torx Bit Socket Set, 1/2-Inch Drive, 7-Piece (CMMT50839) - Large markings for quick socket identification. Meets or exceeds asme specifications. Craftsman full lifetime warranty. Full lifetime warranty, refer to “warranty & support” section below for full details. Bit socket allows for quick fastening when used with ratchet. Black oxide finish for corrosion resistance.

 

CARBYNE 36 Piece Torx Bit Socket E-Socket Set S2 Steel Bits  14-inch 38-inch 12-inch Drive

CARBYNE 36 Piece Torx Bit Socket & E-Socket Set, S2 Steel Bits | 1/4-inch, 3/8-inch & 1/2-inch Drive

CARBYNE 36 Piece Torx Bit Socket & E-Socket Set, S2 Steel Bits | 1/4-inch, 3/8-inch & 1/2-inch Drive - Limited lifetime warranty. Carbyne 36 pc e-socket & torx bit set, 1/4, 3/8 & 1/2″ drive s2 steel bits, zinc phosphate bit finish for corrosion resistance, chrome vanadium steel sockets meets or exceed ansi standards contents 8 pc 1/4″ drive bit sockets, torx t8, t9, t10, t15, t20, t25, t27, t30 5 pc 3/8″ drive bit sockets, torx t40, t45, t47, t50, t55 1 pc 1/2″ drive bit sockets- torx t60 8 pc 1/4″ drive bit sockets, tamper resistant torx t8h, t9h, t10h, t15h, t20h, t25h, t27h, t30h 4 pc 3/8″ drive bit sockets, tamper resistant torx t40h, t45h, t50h, t55h 5 pc 1/4″ drive e sockets, external torx e4, e5, e6, e7, e8 4 pc 3/8″ drive e sockets, external torx e10, e12, e14, e16 1 pc 1/2″ drive e sockets, external torx e18 blow molded storage case.

 

Craftsman 99941 42 Piece 14 and 38-inch Drive Bit and Torx Bit Socket Wrench Set

Craftsman 99941 42 Piece 1/4 and 3/8-inch Drive Bit and Torx Bit Socket Wrench Set

Craftsman 99941 42 Piece 1/4 and 3/8-inch Drive Bit and Torx Bit Socket Wrench Set - High tensile strength steel construction delivers serious torque. 42 piece drive and torx wrench set includes 1/4-inch drive 5 standard hex bit sockets (3/16″, 7/32″, 1/4″, 5/16″, 3/8″) 3 torx bit sockets (t15, t20, t25) 3 external torx sockets (e6, e7, e8) 3/8-inch drive 6 standard hex bit sockets (5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8″) 6 metric hex bit sockets (4, 5, 6, 7, 8, 10mm) 3 slotted screwdriver bit sockets (7/32″, 9/32″, 3/8″) 3 phillips screwdriver bit sockets (#1, #2, #3) 6 torx bit sockets (t27, t30, t40, t45, t47, t50) 4 external tor. Integrated push button controls make ratchet quick to use. Precision cut driver heads reduce stripping. Black oxide protects bits from corrosion and smooth polished steel socket ends wipe clean fast.

 

Torx Bit Socket Set and External Star Socket Set 14Inch 38Inch 12 Inch Drive S2 and Cr-V Steel 60 Piece

Torx Bit Socket Set and External Star Socket Set, 1/4Inch 3/8Inch 1/2 Inch Drive, S2 and Cr-V Steel, 60 Piece

Torx Bit Socket Set and External Star Socket Set, 1/4Inch 3/8Inch 1/2 Inch Drive, S2 and Cr-V Steel, 60 Piece - Precision bits precisely and automatically machined bit tips to ensure accurate size, chamfered bit ends insert smoothly into fasteners and protect both bits and fasteners from damaged edges. Durability torx bits made of drop-forged s2 steel provide rugged strength and durability to unfasten intractable screws recommended for use with hand tools only. Easy storage this set is enclosed in a sturdy, easily carried molded case that makes them easier to organize and access the case also locks shut with a two slide locks, so no accidental spills will happen. Package includes 1/4, 3/8, and 1/2 inch sockets for all of the following, 14 piece tamper proof external star (torx) sockets, 17 piece star (torx) bit sockets, 17 piece tamper proof star (torx) bit, 12 piece star plus (torx plus) bit sockets. Superior versatility abundant variety of sizes in this set make repairs easy on any car, bike or motorcycle, perform industrial work for machinery, remove a vehicles’ axle bolt, fix brakes, or even tune up wheelchairs.

 

SK Hand Tools 84213 13-Piece 14-Inch 38-Inch and 12-Inch Drive Torx Bit Socket Set

SK Hand Tools 84213 13-Piece 1/4-Inch, 3/8-Inch and 1/2-Inch Drive Torx Bit Socket Set

SK Hand Tools 84213 13-Piece 1/4-Inch, 3/8-Inch and 1/2-Inch Drive Torx Bit Socket Set - The bits are manufactured using high-strength s2 steel for reliable longevity, making this socket set the ideal choice for use in high-torque applications with a ratchet, t-handle, or spinner handle. Each socket is designed with a through-hole construction to make it easier to replace worn or broken bits simply pop the old bit out and insert a new replacement bit. Each socket has a c-clip retention groove in the hex end to provide a secure hold on the bit while in use. The sk hand tools 13-piece 1/4-inch, 3/8-inch, and 1/2-inch drive torx bit socket set features sk’s high-polish superkrome finish for long life and corrosion resistance. What’s in the box 1/4-inch drive t8, t10, t15, t20, t25, t27, and t30 torx bit sockets 3/8-inch drive t40, t45, t47, t50, and t55 torx bit sockets 1/2-inch drive t60 torx bit socket, and storage rail for entire set. The set is backed by a limited lifetime warranty. With the help of an extension or universal joint, the bits can be used in awkward and tight spaces. Each socket is also individually labeled with an engraved size marker for easy reference and the entire set comes with a storage rail for easy storage.

 

TEKTON 38 Drive x T40 Torx Bit Socket  SHB14240

TEKTON 3/8″ Drive x T40 Torx Bit Socket | SHB14240

TEKTON 3/8″ Drive x T40 Torx Bit Socket | SHB14240 - Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion. Star-shaped torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out. Large, clear die-stamped size marking is easy to read and can’t wear off. S2 steel bit is press-fit into the socket for a straight, permanent connection that can’t loosen over time. Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.

 

Lisle 26580 T-20 Torx Bit Socket

Lisle 26580 T-20 Torx Bit Socket

Lisle 26580 T-20 Torx Bit Socket - Patented superkrome finish for durability and maximum corrosion resistance. Convenient through-hole design for easy bit replacement. All torx bits are made of heat-treated alloy steel. Limited lifetime warranty. High-strength, s2 steel construction.

 

MulWark Premium 64-Piece Master 38 14 12 in Drive Torx Bit Socket and External Torx Socket Set w Impact Adapter and Reducer  S2 and Cr-V Steel  Automotive Bike Motorcycle ATV

MulWark Premium 64-Piece Master 3/8, 1/4, 1/2 in. Drive Torx Bit Socket and External Torx Socket Set w./ Impact Adapter and Reducer | S2 and Cr-V Steel | Automotive, Bike, Motorcycle & ATV

MulWark Premium 64-Piece Master 3/8, 1/4, 1/2 in. Drive Torx Bit Socket and External Torx Socket Set w./ Impact Adapter and Reducer | S2 and Cr-V Steel | Automotive, Bike, Motorcycle & ATV - Limited lifetime warranty mulwark backs up its products with 100% satisfaction guarantee deficient products without being improperly used, abused, altered or repaired will be replaced in a timely manner. Superior versatility abundant variety of sizes in this set make repairs easy on any car, bike or motorcycle, perform industrial work for machinery, remove a vehicles’ axle bolt, fix brakes, or even tune up wheelchairs 4pcs impact adapters included are designed for impact driver conversion and they have superior strength to endure all conditions. Mirror finish socket base an upgraded radius corner and inner design of the cr-v socket base provides 10% more torque and enhanced leverage to tighten fasteners easily and simplify the turning of rounded corners. Easy to carry hinged storage case with dedicated slots, clear size markings and a protective foam pad is included for easy transportation, safe storage and quick organization. Twist-dimished bits temper proof torx bits made of drop-forged s2 steel provide rugged strength and durability to unfasten intractable screws bit ends are sized and chamfered for precise fitting and reducing fastener wear-out.

 

TEKTON 38 Inch Drive Torx Bit Socket Set 12-Piece T10-T60  SHB91103

TEKTON 3/8 Inch Drive Torx Bit Socket Set, 12-Piece (T10-T60) | SHB91103

TEKTON 3/8 Inch Drive Torx Bit Socket Set, 12-Piece (T10-T60) | SHB91103 - Includes 12-pc 3/8 in drive torx bit sockets t10, t15, t20, t25, t27, t30, t40, t45, t47, t50, t55, t60 and socket rail. Star-shaped torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out. Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion. S2 steel bit is press-fit into the socket for a straight, permanent connection that can’t loosen over time. Four detent grooves provide a secure connection with the drive tool. Large, clear die-stamped size marking is easy to read and can’t wear off.

 

NEIKO 01145A Master Combination Bit Socket Set 45 Pieces  Torx  Hex  External Torx  Screwdriver  S2 Steel Machined Bits  Chrome Vanadium Steel Sockets  Standard SAE and Metric Sized Socket

NEIKO 01145A Master Combination Bit Socket Set, 45 Pieces | Torx | Hex | External Torx | Screwdriver | S2 Steel Machined Bits | Chrome Vanadium Steel Sockets | Standard SAE and Metric Sized Socket

NEIKO 01145A Master Combination Bit Socket Set, 45 Pieces | Torx | Hex | External Torx | Screwdriver | S2 Steel Machined Bits | Chrome Vanadium Steel Sockets | Standard SAE and Metric Sized Socket - [quality] premium s2 alloy steel bit construction that reduces wear-outs and mirror chrome finish for resistance against rust, grime, and corrosion to ensure maximum longevity. [Bit sizes] 12 pc sae hex 1/4″ (1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4) | 3/8″ (5/16, 3/8) | 11 pc metric hex 1/4″ (2, 25, 3, 4, 5, 55, 6 mm) 3/8″ (7, 8, 9, 10 mm) | 4 pc screwdriver 1/4″ (ph1, ph2), 1/4″ (3/16, 1/4) | 7 pc external torx 1/4″ (e4, e5, e6, e7, e8), 3/8″ (e10, e12) | 9pc torx 1/4″ (t6, t8, t10, t15, t20, t25, t27, t30), 3/8″ (t40). [Torque] professional grade chrome vanadium steel sockets for greater torque and turning power. [Versatility] replaces multiple allen wrench sets and includes commonly used hex, torx, external torx and screwdriver socket bits for mechanic work or other applications. [Ease of use] precisely machined chamfered ends for smooth bit insertion with clear size markings on the bits and storage box for quick identification and swapping of parts.

 

GEARWRENCH 13 Pc 14 38 12 Drive Torx Bit Socket Set - 80723

GEARWRENCH 13 Pc. 1/4″, 3/8″ & 1/2″ Drive Torx Bit Socket Set – 80723

GEARWRENCH 13 Pc. 1/4″, 3/8″ & 1/2″ Drive Torx Bit Socket Set – 80723 - Full lifetime warranty. Holding system forces bit surface to opposing side for maximum retention and strength. Impact-resistant slide rail system stores bit sockets. Chrome sockets. Heat treated socket bases for durability and serviceability.

 

GEARWRENCH 14 Drive Long Torx Bit Socket T27 - 82515

GEARWRENCH 1/4″ Drive Long Torx Bit Socket T27 – 82515

GEARWRENCH 1/4″ Drive Long Torx Bit Socket T27 – 82515 - Heat treated socket bases for durability and serviceability. 1/4″ drive long torx bit socket t27.

 

Craftsman 7 Piece Evolv Torx Bit Socket Set 9-01005

Craftsman 7 Piece Evolv Torx Bit Socket Set, 9-01005

Craftsman 7 Piece Evolv Torx Bit Socket Set, 9-01005 - Backed by craftsman’s lifetime guarantee. For use with a 3/8 in drive ratchet. 7 pc torx bit socket set includes sizes t15, t20, t25, t30, t40, t45, t50. Large size markings give you the right size fast. Delivers rapid toque of a ratchet to torx screws.

 

TACKLIFE 14-Piece Torx Bit Socket Set T8 - T60 S2 Alloy Steel Bit Cr-V Steel Socket High Cost PerformanceTBS1A

TACKLIFE 14-Piece Torx Bit Socket Set, T8 – T60, S2 Alloy Steel Bit Cr-V Steel Socket, High Cost Performance,TBS1A

TACKLIFE 14-Piece Torx Bit Socket Set, T8 – T60, S2 Alloy Steel Bit Cr-V Steel Socket, High Cost Performance,TBS1A - 【Clearly sizes】every piece is clearly marked with size in both case and socket each socket has a fastening position which will not cause it to fall off or slide. 【heat treated cr-v sockets】provide superior torque, matte surface, enhance waterproof and rust-proof ability. 【S2 alloy steel】 high quality steel torx bits have high strength and excellent durability the bits are sandblasted to prevent them from rusting and corrosion. 【What you can get】14pcs torx bit sockets 1/4″ drive t8, t10, t15, t20, t25, t27, t30, t35 3/8″ drive t40, t45, t47, t50, t55 1/2″ drive t60. 【High cost performance】rare 14 pieces on the market, one t35 more than 13 pieces of the same size set in the same price range all bits are processed by cnc to ensure accurate size the chamfered end can insert the bits into the fastener smoothly to reduce wear and damage.

 

Lisle 26520 T-60 Torx Bit Socket

Lisle 26520 T-60 Torx Bit Socket

Lisle 26520 T-60 Torx Bit Socket - This is 1 of 12 sizes. Torx bit sets sizes for all automobile applications include sizes t-10 through t-60.

 

TEKTON 38 Drive Long Torx Bit Socket Set 12Piece T10-T60  SHB91305

TEKTON 3/8″ Drive Long Torx Bit Socket Set, 12Piece (T10-T60) | SHB91305

TEKTON 3/8″ Drive Long Torx Bit Socket Set, 12Piece (T10-T60) | SHB91305 - Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin. Large, clear die-stamped size marking is easy to read and can’t wear off. Star-shaped torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out. Includes 12-pc 3/8 in drive long torx bit sockets t10, t15, t20, t25, t27, t30, t40, t45, t47, t50, t55, t60 and storage case. S2 steel bit is press-fit into the socket for a straight, permanent connection that can’t loosen over time. Extra-long bits allow you to reach deep into especially narrow, recessed areas.

 

CARBYNE 14 Piece Tamper Proof Torx Bit Socket Set T-8 to T-60 Sizes S2 Steel Bits CRV Sockets  14-inch 38-inch 12-inch Drive

CARBYNE 14 Piece Tamper Proof Torx Bit Socket Set, T-8 to T-60 Sizes, S2 Steel Bits, CRV Sockets | 1/4-inch, 3/8-inch & 1/2-inch Drive

CARBYNE 14 Piece Tamper Proof Torx Bit Socket Set, T-8 to T-60 Sizes, S2 Steel Bits, CRV Sockets | 1/4-inch, 3/8-inch & 1/2-inch Drive - Zinc phosphate bit finish for corrosion resistance. Meets or exceeds ansi standards, limited lifetime warranty. Chrome vanadium steel sockets. S2 steel bits. Contains 1/4 inch drive tamper proof tt-8, tt-10, tt-15, tt-20, tt-25, tt-27, tt-30, tt-35, 3/8 inch drive tt-40, tt-45, tt-47, tt-50, tt-55, 1/2 inch drivett-60.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.