19 Top Rail Stiles

 

Woodtek 821047 Router Bits Door Construction Stile Rail - Cabinet Rail Stile Set Cove Bead Detail 12 Shank

Woodtek 821047, Router Bits, Door Construction, Stile & Rail – Cabinet, Rail & Stile Set, Cove & Bead Detail, 1/2″ Shank

Woodtek 821047, Router Bits, Door Construction, Stile & Rail – Cabinet, Rail & Stile Set, Cove & Bead Detail, 1/2″ Shank - Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. Positive shear angle places less demand upon your routing equipment. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. The single piece design of this woodtek® carbide-tipped cove and bead with fillet stile and rail router bit set makes set-up more accurate, faster and easier, use with table-mounted portable routers rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Cope and stick joinery for cabinet doors. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Cnc-machining to +/-0. Imported.

 

Infinity Tools 91-525 12 Shank Interior Exterior Door Making Rail Stile Router Bit Set Shaker Profile

Infinity Tools 91-525, 1/2″ Shank Interior & Exterior Door Making Rail & Stile Router Bit Set, Shaker Profile

Infinity Tools 91-525, 1/2″ Shank Interior & Exterior Door Making Rail & Stile Router Bit Set, Shaker Profile - This heavy duty set produces a 7/16″ wide profile. . Building 1-3/8″ interior or 1-3/4″ exterior-facing doors has never been easier than with the help of this specially designed 2-piece door set. Save $$ by making your own doors with this versatile system that comes with both 1/4″ and 1/2″ kerf slot cutters for making doors out of 1-3/8″ or 1-3/4″ stock.

 

Yonico 12238q Rail and Stile Router Bits with 2 Bit Round Over 14-Inch Shank

Yonico 12238q Rail and Stile Router Bits with 2 Bit Round Over 1/4-Inch Shank

Yonico 12238q Rail and Stile Router Bits with 2 Bit Round Over 1/4-Inch Shank - Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence. Yonico rail and stile router bit set (12238q) will cut rail & stile for cabinet doors in a classic round over design. Yonico rail and stile router bits produce impressive and perfect results with every cut yielding years of woodworking satisfaction. Two flute carbide cutters & 1/4″ shanks. .

 

Freud 54-760 Cutter Glass Panel Door for 99-760 99-761 99-763 99-764 New Premier Adjustable Rail Stile Router Bit System

Freud 54-760 Cutter Glass Panel Door for 99-760, 99-761, 99-763, 99-764 New Premier Adjustable Rail & Stile Router Bit System

Freud 54-760 Cutter Glass Panel Door for 99-760, 99-761, 99-763, 99-764 New Premier Adjustable Rail & Stile Router Bit System - Perfect matching profile on all doors because it’s the same set of router bits. Used with new premier rail & stile bits allows for glass panel doors with variable thicknesses and long tenons. Bit features freud’s perma-shield coating that reduces heat and pitch build up along with rust. For new premier adjustable rail & stile router bit system model numbers 99-760, 99-761, 99-763, and 99-764. Bit features freud’s tico hi-density carbide to maximize bit life and material finish.

 

Infinity Tools 91-502 12 Shank Matched Rail Stile Router Bit Set Standard Profile With FREE Set-up Block

Infinity Tools 91-502, 1/2″ Shank Matched Rail & Stile Router Bit Set, Standard Profile With FREE Set-up Block

Infinity Tools 91-502, 1/2″ Shank Matched Rail & Stile Router Bit Set, Standard Profile With FREE Set-up Block - Silver ptfe coating reduces resin build-up for fast and easy cleaning. Standard profile with free 3/4″ setup block. 1-3/4″ cutter diameter with 7/16″ profile width. Micro-grain carbide tips for a long life and repeated sharpening. Precision machined from fatigue-proof steel for extra strength.

 

Yonico 12430 Rail and Stile Cabinet Door Router Bit Set with 4 Bit Ogee 12-Inch Shank

Yonico 12430 Rail and Stile Cabinet Door Router Bit Set with 4 Bit Ogee 1/2-Inch Shank

Yonico 12430 Rail and Stile Cabinet Door Router Bit Set with 4 Bit Ogee 1/2-Inch Shank - Two flute carbide cutters & 1/2″ shanks. Then, run one cut face up and the adjoining cut face down creating a perfect joint. Set comes in a solid wood storage case. Use with up to 1″ stock. The glue joint bit will rout both joining cuts. Make professional raised panel cabinet doors with the yonico 12430, 4 bit router bit set. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Simply set the center of the bit with the center of your stock. The raised panel bit puts a classic ogee edge on the central panel of your door. Use the reversible glue joint bit for gluing up multiple boards to extend panel width. Included in this set ogee raised panel bit, 2 bit matched ogee rail & stile, reversible glue joint bit, allen wrench plus extra spacers, solid wood storage case. Rail & stile bits create a perfectly matched rail & stile door frame.

 

BQLZR 12 Inch Shank 516 Inch Slot Width Cemented Carbide Rail Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter

BQLZR 1/2 Inch Shank 5/16 Inch Slot Width Cemented Carbide Rail & Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter

BQLZR 1/2 Inch Shank 5/16 Inch Slot Width Cemented Carbide Rail & Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter - 83 inch size 87 x 35 mm / 3. If you have any questions about the item,please provide us the manufacturing part number for checking,your profits will be guaranteed. Cemented carbide constructed,1/2 inch shank diamater and 5/16 inch slot width 5. 38 inch (l x w ) weight132g package include 1 x cone tenon router bit. Every product has a unique manufacturing part number label on the inner package that proves it has been qualified,which include part number,model number and inspection date information 2. 42 x 1. Perfect choice of professionals and hobbyists specification materialcemented carbide color silver & yellow brand name bqlzr shank dia 1/2 inch slot width 5/16 inch cutter width 35mm / 1. Feature 1. Woodworking tools,suitable for use of trimming machine 4. 3. 38 inch cutter height 21mm / 0.

 

MLCS 2 Piece Matched Round Over Rail and Stile Set for Entry Doors

MLCS 2 Piece Matched Round Over Rail and Stile Set for Entry Doors

MLCS 2 Piece Matched Round Over Rail and Stile Set for Entry Doors - 2 flute, carbide tipped, matched 2 piece bit set. This set includes 1/4″ and 1/2″ slot cutters and spacers for making either 1/4″ or 1/2″ thick panel tongues. 1/2″ shank. Use for 1-3/8″ stock (interior doors) or 1-3/4″ stock (exterior doors).

 

SET-505 Set-Up Blocks For Infinity Tools Shaker Profile Rail Stile Router Bits

SET-505, Set-Up Blocks For Infinity Tools Shaker Profile Rail & Stile Router Bits

SET-505, Set-Up Blocks For Infinity Tools Shaker Profile Rail & Stile Router Bits - Made from pre-machined high density plastic they will make frustrating bit set-up’s a thing of the past. These new jigs are so handy we wouldn’t go into the shop without them. Just line-up the 3/4″ thick block so it matches the profile of your cutter and your done. For use with 3/4″ stock only, will work with most manufacturer’s bits. . The height of your bit is automatically set so you don’t have to make any trial cuts so you don’t wase time or material.

 

Yonico 12121 Rail and Stile Router Bit Ogee Stacked 12-Inch Shank

Yonico 12121 Rail and Stile Router Bit Ogee Stacked 1/2-Inch Shank

Yonico 12121 Rail and Stile Router Bit Ogee Stacked 1/2-Inch Shank - The yonico stacked rail and stile router bit will cut both rail and stile in a beautiful ogee design. No need to switch or reassemble cutters. Simply cut the stile and then lower the bit in your table to make the rail cuts. Shank is 1/2″. Two flute carbide cutters with ball bearing guide. Use with stock between 3/4″, 15/16″ thickness.

 

Sommerfelds 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail Stile 12-Inch Shank

Sommerfeld’s 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail & Stile, 1/2-Inch Shank

Sommerfeld’s 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail & Stile, 1/2-Inch Shank - All bits are height matched for fast, no-hassle set-ups. New pantented chip-free design prevents edge tear-out. Machines material from 3/4″ to 7/8″ thick. Full 1/2″ engagement on rail and stile for stronger joints and easier to measure drawer parts. Large 3-1/2″ diameter cove raised panel with backcutter.

 

MLCS Matched Rail and Stile Bit Set for Glass Doors

MLCS Matched Rail and Stile Bit Set for Glass Doors

MLCS Matched Rail and Stile Bit Set for Glass Doors - Easily create great looking glass doors with the same profile on the inside and outside of the glass with our matched 2 bit set. 2 flute, carbide-tipped. The special design allows you to make a matching profile glass bead retaining strip when used with a 1/8″ straight bit or 1/8″ saw blade. Use for curio cabinets, entertainment centers, and kitchen cabinet doors.

 

Freud 99-760 New Premier Adjustable Rail Stile Router Bit System 12-Inch Shank

Freud 99-760 New Premier Adjustable Rail & Stile Router Bit System, 1/2-Inch Shank

Freud 99-760 New Premier Adjustable Rail & Stile Router Bit System, 1/2-Inch Shank - Adjustable shims enable both a tight fit when using plywood panels and the ability to use thick panels ( from 55mm to 635mm ) the unique cutter geometry virtually elimantes tearout. Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile for blind tenons, through tenons, or bridle joints. Two router bits that create any door in 5/8-inch to 1-1/4-inch door thickness range. Bits feature freud’s perma-shield coating that reduces heat and pitch build up along with rust, and freud’s tico hi-density carbide to maximize bit life and material finish. Optional cutters are available for double profile doors (99-860) and glass panel doors (54-760) with variable thicknesses and long tenons for perfecting matching profiles on all doors because it’s the same set of router bits.

 

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 14-Inch Shank 3-Piece

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 1/4-Inch Shank, 3-Piece

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 1/4-Inch Shank, 3-Piece - Bit shanks are 1/4″. The yonico 12339q door construction router bit set includes 1/4″ round over rail and stile bits and a 1/4″ cove panel raiser. Ball bearing guides allow you to make precise cuts without the use of a fence. The yonico 12339q router bit set comes in a solid wood storage case. Router bit measurements • rail & stile, 1-3/4″ diameter, 1″ cutter height, 2-7/8″ overall height, 3/8″ depth of cut, 7/8″ bearing diameter • panel raiser, 2-1/2″ diameter, 1/2″ cutter height, 2-7/16″ overall height, 1″ depth of cut, 1/2″ bearing diameter rail and stile bits create a perfectly matched rail and stile door frame. For use with up to 1″ stock. The cove raised panel router bit cuts a stylish edge on the central panel of your door.

 

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set--Round Over Profile

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set–Round Over Profile

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set–Round Over Profile - Fits both 1/2″ and 3/4″ spindles. 2-7/8″ large diameter. For stock sizes 3/4″ to 1-1/4″. 3/8″ depth of cut. Set includes round over stile, 1/2″ straight, 1/4″ straight, rail for round over stile, 1/2″ straight, 1/4″ straight. Versatile 3-in-1 shaper cutters make rail and stile doors with wood and glass panels, as well as tongue and groove joints.

 

CMT 89150311 2-Piece Rail Stile Bit Set 12-Inch Shank 1-34-Inch Diameter Carbide-Tipped

CMT 891.503.11 2-Piece Rail & Stile Bit Set, 1/2-Inch Shank, 1-3/4-Inch Diameter, Carbide-Tipped

CMT 891.503.11 2-Piece Rail & Stile Bit Set, 1/2-Inch Shank, 1-3/4-Inch Diameter, Carbide-Tipped - Clean, precise and well-crafted for strength ideal for jobs requiring perfectly matching profiles. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Make rail and stile joints to buid your own doors use on router tables only. 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance. Male & female bits for material from 23/32 to 7/8-inch thick 2-51/64-inch overall length.

 

MLCS Matched Rail and Stile Router Bit 2 Bit Set--Traditional Profile

MLCS Matched Rail and Stile Router Bit 2 Bit Set–Traditional Profile

MLCS Matched Rail and Stile Router Bit 2 Bit Set–Traditional Profile - Stylish rails and stiles for raised panel doors. Free standard shipping in contiguous usa. 2 piece matched set for perfectly mated joints. Great quality and value. Voted “best cut” in fine woodworking #107.

 

Freud EC-260 Beading Profile Shaper Cutter Set For 34-Inch Rail And Stile Doors - 34 Bore

Freud EC-260 Beading Profile Shaper Cutter Set For 3/4-Inch Rail And Stile Doors – 3/4 Bore

Freud EC-260 Beading Profile Shaper Cutter Set For 3/4-Inch Rail And Stile Doors – 3/4 Bore - Covered by freud’s limited lifetime warranty. Kickback reducing design. Thick micrograin carbide tips.

 

Freud Premier Adjustable Rail Stile Bit with 12 Shank - Shaker Profile 99-762

Freud Premier Adjustable Rail & Stile Bit with 1/2″ Shank – Shaker Profile (99-762)

Freud Premier Adjustable Rail & Stile Bit with 1/2″ Shank – Shaker Profile (99-762) - Cuts all composition materials, plywoods, hardwoods, and softwoods. Unique cutter geometry to eliminate tearout. Patented extended tenon capability, top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile. Ideal material thickness 5/8″ to 1-1/4″ stock. Ticotm hi-density carbide to maximize bit life and material finish.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.