Alfa Tools DS1604 Size 2-3 Morse Taper Drill Sleeve
- Drill sleeves, also known as reducing sleeves, or shell sockets, are used to adapt taper shank tools where the drill shank is smaller than the machine spindle hole. .
Morse Taper Drill Chuck Arbor MT2 to JT3 with Tang End
- This morse taper drill chuck arbor with tang is a mt2 to jt3 arbor taper to chuck. .
3 Morse Taper to 3/8″-24 Threaded Drill Chuck Arbor
- . Allows you to use a drill chuck with 3/8″-24 threaded back in morse taper of a drill press, mill, lathe tailstock, etc.
CNBTR Silver Metal Morse Taper Drill Chuck Arbor (No.1 B12)
- Dimension200 x 26 x 50mm/787 x 102 x 197″(l x w x h). Using the matte aluminium knobs handles is a new way to liven up a dull kitchen, bringing a new life to old furniture. They are made of durable hard aluminium alloy, and can be used for cabinet, drawer, bin, chest of drawe, wardrobe, etc. Attractive and graceful look appeals to a variety of tastes.
DRI-1MTBP #1 Morse Taper Drill Drift (PACK OF 3)
- Fits sockets & sleeves with 1 morse taper. Drift pins for knocking morse taper tools out of spindles and sockets.
Morse Taper Drill Chuck Arbor MT2 to JT2 with Tang End
- This morse taper drill chuck arbor with tang has arbor taper to chuck size of mt2 to jt2. .
Jacobs Chuck 30428D Archer Series 600 Morse Taper Drill Sleeve, 6-11/16″ Length
- Oil toughened and externally precision ground with hardened tang. Outside morse taper sizes is 5 and inside morse taper sizes is 4. Jacobs chuck series 600 morse taper drill sleeve. 6-11/16-inches overall length. Adapt smaller morse taper shank tools to larger machine spindles.
Alfa Tools DS1608 Size 3-5 Morse Taper Drill Sleeve
- Drill sleeves, also known as reducing sleeves, or shell sockets, are used to adapt taper shank tools where the drill shank is smaller than the machine spindle hole. .
Morse Taper Drill Chuck Arbor MT3 to JT33 with Tang End
- . This morse taper drill chuck arbor with tang has arbor taper to chuck size of mt3 to jt33.
Alfa Tools DS1602 Size 1-3 Morse Taper Drill Sleeve
- . Drill sleeves, also known as reducing sleeves, or shell sockets, are used to adapt taper shank tools where the drill shank is smaller than the machine spindle hole.
Jacobs Chuck 30431D Archer Series 600 Morse Taper Drill Sleeve, 8-9/16″ Length
- Oil toughened and externally precision ground with hardened tang. 8-9/16-inches overall length. Adapt smaller morse taper shank tools to larger machine spindles. Jacobs chuck series 600 morse taper drill sleeve. Outside morse taper sizes is 6 and inside morse taper sizes is 5.
2 Morse Taper to 3/8″-24 Threaded Drill Chuck Arbor
- . Allows you to use a drill chuck with 3/8″-24 threaded back in morse taper of a drill press, mill, lathe tailstock, etc.
Jacobs Chuck 30430D Archer Series 600 Morse Taper Drill Sleeve, 6-1/8″ Length
- Adapt smaller morse taper shank tools to larger machine spindles. Jacobs chuck series 600 morse taper drill sleeve. 6-1/8-inches overall length. Outside morse taper sizes is 5 and inside morse taper sizes is 2. Oil toughened and externally precision ground with hardened tang.
Alfa Tools DS1610 Size 4-6 Morse Taper Drill Sleeve
- Drill sleeves, also known as reducing sleeves, or shell sockets, are used to adapt taper shank tools where the drill shank is smaller than the machine spindle hole. .
Alfa Tools DS1603A Size 1-5 Morse Taper Drill Sleeve
- Drill sleeves, also known as reducing sleeves, or shell sockets, are used to adapt taper shank tools where the drill shank is smaller than the machine spindle hole. .
Alfa Tools DS1605 Size 2-4 Morse Taper Drill Sleeve
- . Drill sleeves, also known as reducing sleeves, or shell sockets, are used to adapt taper shank tools where the drill shank is smaller than the machine spindle hole.
Morse Taper Drill Chuck Arbor MT3 to JT3 with Tang End
- . This morse taper drill chuck arbor with tang has arbor taper to chuck size of mt3 to jt3.
CNBTR Silver Metal Morse Taper Drill Chuck Arbor (No.1 B16)
- 065, taper 1 20. 59″(l x dia) weight 88 g package include 1 x morse taper drawbar adapter arbor. 2 b12) standard b12 drill chuck with 1-10,1. 020 dimension 103 x 18mm/4. 5-10 no. 2 the big end diameter 17. 1 b16) standard b16 drill chuck with 1-13 no. 1 the big end diameter 12. 047 dimension 88 x 12mm/3. 047 dimension 92 x 15mm/3. Feature made of superior quality steel, durable and long service life. Specification material metal color silver and black type 1 (no. 46 x 0. 71″(l x dia) weight 144 g type 2 (no. 06 x 0. 1 the big end diameter 12. 5-10 no. 065, taper 1 20. 47″(l x dia) weight 68 g type 3 (no. 1 b12) standard b12 drill chuck with 1-10,1. 78, taper 1 20. Applies to morse taper connection rod is mainly used for drilling, turning and milling, connection drill chuck clamping action of the tool effectively, to expand use of machine tools. 62 x 0.
1 Morse Taper to 3/8″-24 Threaded Drill Chuck Arbor
- Allows you to use a drill chuck with 3/8″-24 threaded back in morse taper of a drill press, mill, lathe tailstock, etc. .
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
