19 Greatest Socket Sockets

 

TEKTON 4935 1/2-Inch Drive by 35 mm Deep Impact Socket, 6-Point - Made of premium chrome vanadium steel with a protective black phosphate finish. Engineered for use with impact drivers. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. Extra-deep broach accommodates longer fasteners. High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off.

 

Grey Pneumatic (20265B) 1/2″ Drive 13/16″ 5-Point Utility Socket - Benefits of the gp impact socket, increased strength, easier access to tight areas, and reduced. Grey pneumatic sockets are designed for professional tool users. 5-point. Engineered specifically for use with impact tools. Made of high quality alloy steel.

 

Pack Of 10 Multi Base Halogen Mini Bi-Pin w/ 6″ wires Socket up to 75 Watts Ceramic Body with Mica Covers for Light Bulbs with Base GU5.3, G4, MR11, MR16 - Heat resistant ceramic insulating base and nylon braided wire. Two holes for bulb contact pins, and the other two holes for affixing screw. Pre-stripped wire ends and soldering might be applied for permanent installation. Accommodates g4, g635, gy635,gx53, mr16, gz4,mr11 base, compatible with led, cfl and halogen bulbs. Dimension 17 mm dia x 10 mm h / 150 mm wire.

 

DEWALT 1/2″ Drive Socket Deep Impact 6PT 1 5/8 - Laser etched markings for easier identification on black phosphate finishes. Oil rubbed black oxide coating for corrosion resistance. Directtorque technology helps prevent rounding of fasteners. Heat treated cr-440 steel for strength and durability. O-ring and retaining pin compatible for added job-site safety.

 

Steellabels – 3 for $10 Deal – Chrome Socket Labels – tough chrome foil tool decals, great for mechanics & homeowners - Made from custom “medical grade” tight radius foil material with permanent adhesive, oil and gas resistant. Don’t pay big bucks for all new laser etched sockets when you can do the job better at a fraction of the cost. Save big on our “3 sheet lot” of “color coded” labels, each sheet contains 60 individual coated and dye cut chrome socket labels. Check out our other products, including our matching magnetic and adhesive toolbox labels offered on amazon prime. Designed to fit all fine tool brands snap on, craftsman, mac, matco, stanley, cromwell and other fine tools.

 

Powerbuilt 647093 1/2-Inch Drive, 1-11/16-inch Dodge Spindle Nut Socket - Tool solutions for most all situations. Fits 1994-newer dodge 1/2-ton 4×4 pickup trucks equipped with dana 44 front axle as well as dana 60 axles with vacuum disconnect. Built to exceed tool standards. The right tool makes the job easier. Impact rated. Quality product by powerbuilt. Made to be the most reliable tools in the market today. Chrome vanadium construction.

 

DEWALT DW22812 1/2-Inch 10-Piece IMPACT READY Socket Set - Designed for use in both corded and cordless impact drivers and wrenches. Pivoting organization pins allow for customized application-based storage. Large laser-etched markings make each socket easily identifiable. Small footprint and easy to carry includes 8 sockets and 2 adapters. Recessed corners distribute torque across flats, promoting life of the socket.

 

TEKTON 4932 1/2-Inch Drive by 32 mm Deep Impact Socket, 6-Point - Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. Engineered for use with impact drivers. High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off. Extra-deep broach accommodates longer fasteners. Made of premium chrome vanadium steel with a protective black phosphate finish.

 

TEKTON 4817 1/2-Inch Drive Shallow Impact Socket Set, Metric, Cr-V, 6-Point, 11 mm – 32 mm, 14-Sockets - Shallow socket depth provides access to fasteners in tight spaces. Meets or exceeds ansi performance standards. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-of. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. High-contrast permanent laser etched size markings are easy-to-read, even in low light.

 

TEKTON 4883 1/2-Inch Drive Deep Impact Socket Set, Metric, Cr-V, 6-Point, 10 mm – 24 mm, 15-Sockets - Meets or exceeds ansi performance standards. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Extra-deep broach accommodates longer fasteners. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. High-contrast permanent laser etched size markings are easy-to-read, even in low light.

 

TEKTON 14260 1/2-Inch Drive by 21mm Deep Socket, Cr-V, 6-Point - 6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slipping. Made from premium chrome vanadium steel with a durable mirror chrome plated finish. Extra-deep broach reaches over long, threaded shafts to access nuts. Detent notches in drive end lock onto ratchets and extensions. Advanced design grips flat sides of fastener heads, not corners, to prevent round off.

 

DEWALT 1/2″ 12 PT Deep Socket 27MM - Direct torque technology helps prevent rounding of fasteners. Hard stamped markings to prevent loss of identification over time. Full polish chrome vanadium finish helps prevent chipping and flaking under toughest environments. Knurled control ring for added grip when handling the socket. Chamfered open end for easier engagement of fasteners.

 

JACKYLED GU24 to E26 / E27 Adapter, Pack of 10, Maximum Wattage 1000W, Heat Resistant Up to 200℃, Fire Resistant, Converts your Pin Base Fixture (GU24) to Standard Screw-in Bulb Socket (E26/E27) - ï‚·best bargain this package includes 10 adapters, big saving a deal for a full room application this can used to test the product quality as a starter pack. ï‚·Length the jacky-led socket converter increases the length by 15 to 25 inches depending on depth of the bass you are screwing into. ï‚·Application this jacky-led can be used to transforms your gu24 fixture to fit standard the (e26 / e27) medium size bulb in any it fits any standard medium bulb to the gu24 and enables almost all commonly found bulbs to work with the output. ï‚·Wattage/ voltage the jacky-led can be used with a maximum watts of 1000w and the maximum voltage of 250v. ï‚·Safety & satisfaction guaranteed the jacky-led is ce certificated the product is made with fire retardant pbt and ceramic material, 100% safe from electric flaming, heat resistant 100% satisfaction guaranteed jackey-led always stand back for its products, any issue of the product please don’t hesitate to contact us.

 

DEWALT 1/2″ 6 PT STD Socket 11MM - Knurled control ring for added grip when handling the socket. Direct torque technology helps prevent rounding of fasteners. Chamfered open end for easier engagement of fasteners. Hard stamped markings to prevent loss of identification over time. Full polish chrome vanadium finish helps prevent chipping and flaking under toughest environments.

 

JACKYLED E26 4 in 1 Socket Adapter E27 Converts 3 Way Splitter for Standard LED Bulbs 360 Degrees Adjustable 180 Degree Bending Max Watt 400W - Satisfaction guaranteed 100% satisfaction guaranteed 60 days changing or refunding without reasons jackeyled always stand back for its products, any issue of the product please don’t hesitate to contact usattentionjackyled products are sold and shipped by jackybrand. 360℃ rotating degree each socket has 360 rotating degree design,and the bending degree is 180 you can change the angle of the socket at your will. Safety designedce certificated inflaming retarding pbt fireproof material and aluminium alloy, the heat resistant is up to 200 degree 100% safe from electric flaming, no fire hazard. Max wattage 90-240 voltage, max wattage400w, compatible with standard light bulb e26/e27, edison base works with incandescent and cfl (energy efficient) bulbs. Applicaton a deal for a full house application, also a good test for this premium quality for the bedroom, living room, conference room, kitchen, living room, hall, telephone booths, workshops and exhibitions, etc.

 

Lisle 14600 Fuel Filter Socket, 29mm - For more information check the main lisle tool- 13300 or 13650. Replacement part for lisle tool- 13300 or 13650. 6 point 29mm sockets for use on oil and fuel filter canisters when replacing the lament. Use with 3/8″ drive. Low profile oil and fuel filter canister sockets.

 

TEKTON 4816 1/2-Inch Drive Shallow Impact Socket Set, Inch, Cr-V, 6-Point, 3/8-Inch – 1-1/4-Inch, 14-Sockets - Meets or exceeds ansi performance standards. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces. High-contrast permanent laser etched size markings are easy-to-read, even in low light.

 

DEWALT 1/2″ Drive Socket Deep Impact 6PT 1 1/2 - Heat treated cr-440 steel for strength and durability. O-ring and retaining pin compatible for added job-site safety. Oil rubbed black oxide coating for corrosion resistance. Laser etched markings for easier identification on black phosphate finishes. Directtorque technology helps prevent rounding of fasteners.

 

TEKTON 4929 3/8-Inch Drive by 7/8-Inch Oxygen Sensor Socket - Constructed from drop forged, heat treated, chrome vanadium steel. Side cutout prevents damage to wires. High-contrast, permanent, laser etched size marking is easy-to-read, even in low light. Common 6 point, 7/8 in (22mm) socket fits most oxygen sensors. Removes and installs oxygen sensors on vehicles with computer-controlled engines.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.