19 Best Titanium Nitride Coatings

 

SGS 48806 5M 3 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 45 mm Cutting Diameter 16 mm Cutting Length 6 mm Shank Diameter 50 mm Length

SGS 48806 5M 3 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 4.5 mm Cutting Diameter, 16 mm Cutting Length, 6 mm Shank Diameter, 50 mm Length

SGS 48806 5M 3 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 4.5 mm Cutting Diameter, 16 mm Cutting Length, 6 mm Shank Diameter, 50 mm Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.

 

SGS 32569 55CR V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 38 Cutting Diameter 1-12 Cutting Length 38 Shank Diameter 4 Length 0030 Corner Radius

SGS 32569 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 1-1/2″ Cutting Length, 3/8″ Shank Diameter, 4″ Length, 0.030″ Corner Radius

SGS 32569 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 1-1/2″ Cutting Length, 3/8″ Shank Diameter, 4″ Length, 0.030″ Corner Radius - Tackle a range of applications with this tool. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. The v-carb end mill is the finishing touch that you can expect more from.

 

SGS 39113 1 4 Flute Square End General Purpose End Mill Titanium Nitride Coating 764 Cutting Diameter 38 Cutting Length 18 Shank Diameter 1-12 Length

SGS 39113 1 4 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 7/64″ Cutting Diameter, 3/8″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length

SGS 39113 1 4 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 7/64″ Cutting Diameter, 3/8″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length - . Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.

 

SGS 30199 1 4 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 964 Cutting Diameter 12 Cutting Length 316 Shank Diameter 2 Length

SGS 30199 1 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 9/64″ Cutting Diameter, 1/2″ Cutting Length, 3/16″ Shank Diameter, 2″ Length

SGS 30199 1 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 9/64″ Cutting Diameter, 1/2″ Cutting Length, 3/16″ Shank Diameter, 2″ Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. . Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.

 

SGS 68302 101 Slow Spiral Drills Aluminum Titanium Nitride Coating 21 mm Cutting Diameter 24 mm Cutting Length 49 mm Length

SGS 68302 101 Slow Spiral Drills, Aluminum Titanium Nitride Coating, 2.1 mm Cutting Diameter, 24 mm Cutting Length, 49 mm Length

SGS 68302 101 Slow Spiral Drills, Aluminum Titanium Nitride Coating, 2.1 mm Cutting Diameter, 24 mm Cutting Length, 49 mm Length - . Designed for effective drilling in a wide variety of materials and applications, the sgs general purpose line of drills are manufactured to the highest standards.

 

SGS 36346 Z1B Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating 38 Cutting Diameter 78 Cutting Length 38 Shank Diameter 2-12 Length

SGS 36346 Z1B Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length

SGS 36346 Z1B Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length - The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications.

 

SGS 32668 55 V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 34 Cutting Diameter 1-58 Cutting Length 34 Shank Diameter 4 Length

SGS 32668 55 V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 3/4″ Cutting Diameter, 1-5/8″ Cutting Length, 3/4″ Shank Diameter, 4″ Length

SGS 32668 55 V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 3/4″ Cutting Diameter, 1-5/8″ Cutting Length, 3/4″ Shank Diameter, 4″ Length - The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. . However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool. The v-carb end mill is the finishing touch that you can expect more from.

 

SGS 31970 3ELB 2 Flute Ball End General Purpose End Mill Titanium Nitride Coating 14 Cutting Diameter 1-12 Cutting Length 14 Shank Diameter 4 Length

SGS 31970 3ELB 2 Flute Ball End General Purpose End Mill, Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length

SGS 31970 3ELB 2 Flute Ball End General Purpose End Mill, Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length - . Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment.

 

SGS 32570 55CR V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 58 Cutting Diameter 2-12 Cutting Length 58 Shank Diameter 5 Length 0030 Corner Radius

SGS 32570 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 2-1/2″ Cutting Length, 5/8″ Shank Diameter, 5″ Length, 0.030″ Corner Radius

SGS 32570 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 2-1/2″ Cutting Length, 5/8″ Shank Diameter, 5″ Length, 0.030″ Corner Radius - However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. The v-carb end mill is the finishing touch that you can expect more from.

 

SGS 38164 1CR 4 Flute Corner Radius General Purpose End Mill Aluminum Titanium Nitride Coating 14 Cutting Diameter 34 Cutting Length 14 Shank Diameter 2-12 Length 0030 Corner Radius

SGS 38164 1CR 4 Flute Corner Radius General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length, 0.030″ Corner Radius

SGS 38164 1CR 4 Flute Corner Radius General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length, 0.030″ Corner Radius - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. .

 

SGS 36125 61 Single End Roughing End Mill Titanium Nitride Coating 34 Cutting Diameter 1-58 Cutting Length 34 Shank Diameter 4 Length 060 Corner Radius

SGS 36125 61 Single End Roughing End Mill, Titanium Nitride Coating, 3/4″ Cutting Diameter, 1-5/8″ Cutting Length, 3/4″ Shank Diameter, 4″ Length, .060″ Corner Radius

SGS 36125 61 Single End Roughing End Mill, Titanium Nitride Coating, 3/4″ Cutting Diameter, 1-5/8″ Cutting Length, 3/4″ Shank Diameter, 4″ Length, .060″ Corner Radius - Sgs roughing end mills are available in 3 very distinct styles to meet the needs of specific material groups. The carbide is designed to compliment the demanding environment of roughing operations. Each version has an engineered chip breaking form to optimize performance in their key material groups. .

 

Ignitor T High Tech Folder Knife with Titanium Nitride Coating Ignitor T Assisted Opening

Ignitor T High Tech Folder Knife with Titanium Nitride Coating Ignitor T Assisted Opening

Ignitor T High Tech Folder Knife with Titanium Nitride Coating Ignitor T Assisted Opening - Yes, this is a design for right-hand opening, but it is the best integration of folder safety and fast access that we have ever seen in a sport and work folder. On the tactical ignitor t models, the blade receives a non-reflective dark gray titanium nitride coating, which provides maximum corrosion protection. We challenge you to find a knife of this quality for the money. It raises the bar for all value-priced folders, by using premium blade steel, layered g10 scales, and patented features including assisted opening, a unique knife safety and our special serrations. The frame uses our rigid interframe build with stainless steel liners, one locking, and layered g10 scales, textured and cnc machined to aid grip. The “t” models also feature black g10 scales. We hope to ignite your passion for high-tech folders with this new knife series. Caution when closing the knife, always press firmly to fully close the blade, and be sure the fire safe pin locks into place securely with an audible “click”. You have your choice of a razor-sharp edge or combination razor-sharp edge with our patented vefftm serrations, which are superior for fast cutting of cord, netting and vegetation. Consider these features first the blade. Then the blade springs open instantly for use. The true breakthrough is our ability to combine our patented outbursttm assisted opening with the patent-pending fire safetm mechanism. When closed, the blade is safely locked by the fire safe pin. It cannot be opened until the safety button on the end of the thumb stud is firmly depressed and the thumb stud is nudged outward. The deep finger choil and pommel fit the hand nicely. That’s why we call it the ignitortm. It’s a modifed drop point design with a high hollow grind. We use premium 8cr14mov stainless steel. The flat cross-section makes for comfortable in-pocket carry.

 

SGS 36513 Z16CR Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating 38 Cutting Diameter 58 Cutting Length 38 Shank Diameter 2 Length

SGS 36513 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 5/8″ Cutting Length, 3/8″ Shank Diameter, 2″ Length

SGS 36513 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 5/8″ Cutting Length, 3/8″ Shank Diameter, 2″ Length - The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. . The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever.

 

SGS 30456 3 2 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 1332 Cutting Diameter 1 Cutting Length 716 Shank Diameter 2-34 Length

SGS 30456 3 2 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 13/32″ Cutting Diameter, 1″ Cutting Length, 7/16″ Shank Diameter, 2-3/4″ Length

SGS 30456 3 2 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 13/32″ Cutting Diameter, 1″ Cutting Length, 7/16″ Shank Diameter, 2-3/4″ Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.

 

SGS 31360 17 2 Flute Square End Stub Length End Mill Aluminum Titanium Nitride Coating 18 Cutting Diameter 14 Cutting Length 18 Shank Diameter 1-12 Length

SGS 31360 17 2 Flute Square End Stub Length End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 1/4″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length

SGS 31360 17 2 Flute Square End Stub Length End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 1/4″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. . Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.

 

SGS 32579 55CR V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 58 Cutting Diameter 1-58 Cutting Length 58 Shank Diameter 3-12 Length 0030 Corner Radius

SGS 32579 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 1-5/8″ Cutting Length, 5/8″ Shank Diameter, 3-1/2″ Length, 0.030″ Corner Radius

SGS 32579 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 1-5/8″ Cutting Length, 5/8″ Shank Diameter, 3-1/2″ Length, 0.030″ Corner Radius - Tackle a range of applications with this tool. The v-carb end mill is the finishing touch that you can expect more from. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components.

 

SGS 36142 57 Power-Carb High Performance End Mill Aluminum Titanium Nitride Coating 38 Cutting Diameter 1316 Cutting Length 38 Shank Diameter 4 Length

SGS 36142 57 Power-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 13/16″ Cutting Length, 3/8″ Shank Diameter, 4″ Length

SGS 36142 57 Power-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 13/16″ Cutting Length, 3/8″ Shank Diameter, 4″ Length - The high performance s-gash geometry on the ball improves shearing while reducing the load. Designed for high speed roughing and finishing of complex contoured shapes in hardened materials. The turbo carb end mill is made of an application specific carbide to improve wear resistance and toughness in demanding applications. Ideal for dry machining with the exclusive ti-namite a tool coating.

 

SGS 31882 1EL 4 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 14 Cutting Diameter 1-12 Cutting Length 14 Shank Diameter 4 Length

SGS 31882 1EL 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length

SGS 31882 1EL 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. .

 

SGS 39339 3 2 Flute Square End General Purpose End Mill Titanium Nitride Coating 516 Cutting Diameter 1316 Cutting Length 516 Shank Diameter 2-12 Length

SGS 39339 3 2 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 5/16″ Cutting Diameter, 13/16″ Cutting Length, 5/16″ Shank Diameter, 2-1/2″ Length

SGS 39339 3 2 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 5/16″ Cutting Diameter, 13/16″ Cutting Length, 5/16″ Shank Diameter, 2-1/2″ Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. . Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.