18 Most Wanted End Mill Diameters for 2019

 

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 01250 18in Diameter 18in Shank 0187in Length of Cut 2 12in Overall Length Uncoated Series 1746 1746-1250625CR #ad

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2 1/2in Overall Length Uncoated Series 1746 (1746-1250.625CR)

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2 1/2in Overall Length Uncoated Series 1746 (1746-1250.625CR) #ad - Kyocera usa made 1746-1250625cr 3 flute extended reach large corner radius end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 2 1/2in overall length. Reach length 0625in, radius 003in. Series 1746, uncoated.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00750in Diameter 18in Shank 0112in Length of Cut LOC 2 12in Overall Length OAL Uncoated Series 1742 1742-0750900 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0750in Diameter 1/8in Shank 0.112in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0750.900)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0750in Diameter 1/8in Shank 0.112in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0750.900) #ad - 0112in length of cut, 2 1/2in overall length. 00750in diameter, 1/8in shank. Kyocera 1742-0750900 3 flute extended reach stub length square end mill. Uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera Standard Length APOLLO Variable Helix End Mill 01250 18in Diameter 18in Shank 12in Length of Cut 1-12in Overall Length AlCrN 4 Flute Corner Radius AP4-1250500 #ad

Kyocera Standard Length APOLLO Variable Helix End Mill 0.1250 1/8in Diameter 1/8in Shank 1/2in Length of Cut 1-1/2in Overall Length AlCrN 4 Flute Corner Radius AP4-1250.500

Kyocera Standard Length APOLLO Variable Helix End Mill 0.1250 1/8in Diameter 1/8in Shank 1/2in Length of Cut 1-1/2in Overall Length AlCrN 4 Flute Corner Radius AP4-1250.500 #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Diameter 01250 1/8in, shank 1/8in, length of cut 1/2in, overall length 1-1/2in. Coating alcrn, flutes 4 flute. Kyocera ap4-1250500 standard length apollo variable helix end mill. End type corner radius, reach n/a, radius 0010, 0015in, point angle n/a.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00450in Diameter 18in Shank 0067in Length of Cut LOC 2 12in Overall Length OAL Uncoated Series 1742 1742-0450900 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0450in Diameter 1/8in Shank 0.067in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0450.900)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0450in Diameter 1/8in Shank 0.067in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0450.900) #ad - 00450in diameter, 1/8in shank. Uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera 1742-0450900 3 flute extended reach stub length square end mill. 0067in length of cut, 2 1/2in overall length.

 

Sino-max M2 High Speed Steel End Mill Polished Finish 2 Flute Square End 1 Cutting Length 12 Cutting Diameter 3 Overall Length 12 Shank Pack of 1 #ad

Sino-max M2 High Speed Steel End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Overall Length, 1/2″ Shank (Pack of 1)

Sino-max M2 High Speed Steel End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Overall Length, 1/2″ Shank (Pack of 1) #ad - M2 highs speed steel enable high hardness. Bright polished surface treatment enable nice looking. High level heat treatment. 2 flutes design to enable quick chips removal and quick cutting.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00350in Diameter 18in Shank 0052in Length of Cut LOC 2 12in Overall Length OAL Uncoated Series 1742 1742-0350281 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0350in Diameter 1/8in Shank 0.052in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0350.281)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0350in Diameter 1/8in Shank 0.052in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0350.281) #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera 1742-0350281 3 flute extended reach stub length square end mill. 0052in length of cut, 2 1/2in overall length. 00350in diameter, 1/8in shank. Uncoated.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00938 332in Diameter 18in Shank 0139in Length of Cut LOC 4in Overall Length OAL AlTiN Coated Series 1742 1742-0938L1875 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0938 3/32in Diameter 1/8in Shank 0.139in Length of Cut (LOC) 4in Overall Length (OAL) AlTiN Coated Series 1742 (1742-0938L1875)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0938 3/32in Diameter 1/8in Shank 0.139in Length of Cut (LOC) 4in Overall Length (OAL) AlTiN Coated Series 1742 (1742-0938L1875) #ad - Altin coated. 0139in length of cut, 4in overall length. Kyocera 1742-0938l1875 3 flute extended reach stub length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00938 3/32in diameter, 1/8in shank.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00650in Diameter 18in Shank 0097in Length of Cut LOC 2 12in Overall Length OAL Uncoated Series 1742 1742-0650800 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0650in Diameter 1/8in Shank 0.097in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0650.800)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0650in Diameter 1/8in Shank 0.097in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0650.800) #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera 1742-0650800 3 flute extended reach stub length square end mill. 0097in length of cut, 2 1/2in overall length. 00650in diameter, 1/8in shank. Uncoated.

 

Niagara Cutter N55830 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 6 Overall Length 1000 Cutting Diameter 1000 Shank Diameter #ad

Niagara Cutter N55830 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 6″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter

Niagara Cutter N55830 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 6″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter #ad - Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Four flutes produce a better finish than fewer flutes.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 00500in Diameter 18in Shank 0075in Length of Cut 2 12in Overall Length Uncoated Series 1755 1755-0500250 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0500in Diameter 1/8in Shank 0.075in Length of Cut 2 1/2in Overall Length Uncoated Series 1755 (1755-0500.250)

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0500in Diameter 1/8in Shank 0.075in Length of Cut 2 1/2in Overall Length Uncoated Series 1755 (1755-0500.250) #ad - 00500in diameter, 1/8in shank, 0075in length of cut, 2 1/2in overall length. Series 1755, uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length 025in, radius n/a. Kyocera usa made 1755-0500250 3 flute extended reach stub length ball nose end mill.

 

Niagara Cutter 85705 Flute Single End Solid Carbide End Mill Diameter 85705 #ad

Niagara Cutter 85705 Flute Single End Solid Carbide End Mill, Diameter 85705

Niagara Cutter 85705 Flute Single End Solid Carbide End Mill, Diameter 85705 #ad - Kyocera 1610-0190057 2 flute standard length square end mill. Niagara cutter 5/8″ x 5/8″ x 6″ 4-flute x 3″ flute length. Uncoated. 0019in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.

 

Kyocera USA Made 3 Flute Standard Length Ball Nose End Mill 00250in Diameter 18in Shank 0125in Length of Cut 2 12in Overall Length AlTiN Coated Series 1725 1725-0250L125 #ad

Kyocera USA Made 3 Flute Standard Length Ball Nose End Mill 0.0250in Diameter 1/8in Shank 0.125in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1725 (1725-0250L125)

Kyocera USA Made 3 Flute Standard Length Ball Nose End Mill 0.0250in Diameter 1/8in Shank 0.125in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1725 (1725-0250L125) #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length n/a, radius n/a. Series 1725, altin coated. Kyocera usa made 1725-0250l125 3 flute standard length ball nose end mill. 00250in diameter, 1/8in shank, 0125in length of cut, 2 1/2in overall length.

 

Kyocera USA Made 3 Flute Extended Reach Standard Corner Radius End Mill 01250 18in Diameter 18in Shank 0187in Length of Cut 3in Overall Length Uncoated Series 1744 1744-12501500C #ad

Kyocera USA Made 3 Flute Extended Reach Standard Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 3in Overall Length Uncoated Series 1744 (1744-1250.1500C)

Kyocera USA Made 3 Flute Extended Reach Standard Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 3in Overall Length Uncoated Series 1744 (1744-1250.1500C) #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 3in overall length. Series 1744, uncoated. Reach length 15in, radius 0015in. Kyocera usa made 1744-12501500c 3 flute extended reach standard corner radius end mill.

 

Kyocera USA Made 3 Flute Extended Reach Small Corner Radius End Mill 01250 18in Diameter 18in Shank 0187in Length of Cut 25in Overall Length Uncoated Series 1743 1743-12501000C #ad

Kyocera USA Made 3 Flute Extended Reach Small Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length Uncoated Series 1743 (1743-1250.1000C)

Kyocera USA Made 3 Flute Extended Reach Small Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length Uncoated Series 1743 (1743-1250.1000C) #ad - Reach length 1in, radius 001in. Series 1743, uncoated. Kyocera usa made 1743-12501000c 3 flute extended reach small corner radius end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 25in overall length.

 

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 01250 18in Diameter 18in Shank 0187in Length of Cut 25in Overall Length AlTiN Coated Series 1746 1746-1250L625CR #ad

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length AlTiN Coated Series 1746 (1746-1250L625CR)

Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2.5in Overall Length AlTiN Coated Series 1746 (1746-1250L625CR) #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length 0625in, radius 003in. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 25in overall length. Kyocera usa made 1746-1250l625cr 3 flute extended reach large corner radius end mill. Series 1746, altin coated.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 00400in Diameter 18in Shank 0060in Length of Cut 2 12in Overall Length AlTiN Coated Series 1755 1755-0400L203 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1755 (1755-0400L203)

Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1755 (1755-0400L203) #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00400in diameter, 1/8in shank, 0060in length of cut, 2 1/2in overall length. Kyocera usa made 1755-0400l203 3 flute extended reach stub length ball nose end mill. Series 1755, altin coated. Reach length 0203in, radius n/a.

 

Kyocera USA Made 2 Flute Standard Length Square End Mill 0008in Diameter 18in Shank 0024in Length of Cut LOC 1 12in Overall Length OAL AlTiN Coated Series 1610 1610-0080L024 #ad

Kyocera USA Made 2 Flute Standard Length Square End Mill 0.008in Diameter 1/8in Shank 0.024in Length of Cut (LOC) 1 1/2in Overall Length (OAL) AlTiN Coated Series 1610 (1610-0080L024)

Kyocera USA Made 2 Flute Standard Length Square End Mill 0.008in Diameter 1/8in Shank 0.024in Length of Cut (LOC) 1 1/2in Overall Length (OAL) AlTiN Coated Series 1610 (1610-0080L024) #ad - 0024in length of cut, 1 1/2in overall length. Kyocera 1610-0080l024 2 flute standard length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 0008in diameter, 1/8in shank. Altin coated.

 

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 00400in Diameter 18in Shank 0060in Length of Cut LOC 2 12in Overall Length OAL AlTiN Coated Series 1742 1742-0400L600 #ad

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1742 (1742-0400L600)

Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1742 (1742-0400L600) #ad - Kyocera 1742-0400l600 3 flute extended reach stub length square end mill. Altin coated. 0060in length of cut, 2 1/2in overall length. 00400in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.