3/4″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw
- We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. Adopting the vacuum brazed tech. They fit on high-speed angle grinders with a 5/8″ -11 spindle. Although damo dry / wet core bits are designed for use on the job site without using water,wet cutting is recommended whenever possible. Available in 1/4″,3/8″,1/2″,3/4″,1″, 1-1/4″, 1-3/8″,1-1/2″,1-3/4″,2″and 2-1/2″ sizes. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8″ shank. They can be used to drill the faucet-mounting holes in countertops and vanities. , They provide the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop.
Concord Blades CBD02500HP 2-1/2 Inch Laser Welded Dry/Wet Diamond Core Drill Bit by Concord Blades
- 10 mm segment height, 3. 8mm segment width, 5/8-11mm arboruse dry/wetthis core bit is used for general purpose dry drilling on a variety of soft brick and concrete blockdoes not come with a pilot bit.
1-1/2″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw
- They can be used to drill the faucet-mounting holes in countertops and vanities. Although damo dry / wet core bits are designed for use on the job site without using water,wet cutting is recommended whenever possible. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. Available in 1/4″,3/8″,1/2″,3/4″,1″, 1-1/4″, 1-3/8″,1-1/2″,1-3/4″,2″and 2-1/2″ sizes. You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8″ shank. Adopting the vacuum brazed tech. We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. , They provide the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop. They fit on high-speed angle grinders with a 5/8″ -11 spindle.
DPT 4-1/4-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 4-1/4″ Diameter x 17″ Length
- Length 17″ long to produce 13-1/2″ core. Segment height 0400″. The super-plus quality wet diamond core bits offers the best lifetime available on market. 1-1/4-7 thread. Laser wielded.
1/2″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw
- Adopting the vacuum brazed tech. Available in 1/4″,3/8″,1/2″,3/4″,1″, 1-1/4″, 1-3/8″,1-1/2″,1-3/4″,2″and 2-1/2″ sizes. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. They can be used to drill the faucet-mounting holes in countertops and vanities. They fit on high-speed angle grinders with a 5/8″ -11 spindle. , They provide the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8″ shank. Although damo dry / wet core bits are designed for use on the job site without using water,wet cutting is recommended whenever possible.
7-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 7″ Diameter x 17″ Length
- 1-1/4-7 thread. Length 17″ long to produce 13-1/2″ core. The super-plus quality wet diamond core bits offers the best lifetime available on market. Segment height 0400″. Laser wielded.
6-1/2-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 6-1/2″ Diameter x 17″ Length
- The super-plus quality wet diamond core bits offers the best lifetime available on market. Laser wielded. Segment height 0400″. Length 17″ long to produce 13-1/2″ core. 1-1/4-7 thread.
2″ DAMO Dry/Wet Diamond Core Drill Bit for Concrete/Granite/Stone/Hole Saw
- Although damo dry / wet core bits are designed for use on the job site without using water,wet cutting is recommended whenever possible. You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8″ shank. Available in 1/4″,3/8″,1/2″,3/4″,1″, 1-1/4″, 1-3/8″,1-1/2″,1-3/4″,2″and 2-1/2″ sizes. Adopting the vacuum brazed tech. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. They fit on high-speed angle grinders with a 5/8″ -11 spindle. , They provide the best cutting performance and can drill through the toughest 1-1/4″ granite or engineered stone countertop. They can be used to drill the faucet-mounting holes in countertops and vanities.
Concord Blades CBD03000HP 3 Inch Laser Welded Dry/Wet Diamond Core Drill Bit by Concord Blades
- 10 mm segment height, 3. 8mm segment width, 5/8-11mm arboruse dry/wetthis core bit is used for general purpose dry drilling on a variety of soft brick and concrete blockdoes not come with a pilot bit.
4-1/4-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 4-1/4″ Diameter x 17″ Length
- The super-plus quality wet diamond core bits offers the best lifetime available on market. Laser wielded. Length 17″ long to produce 13-1/2″ core. 1-1/4-7 thread. Segment height 0400″.
Advanta – 1-1/8″ Wet Diamond Core Drill Bit for Granite Marble Stone Premium Grade
- Max drilling depth 2″, max speed 11,000 rpm. 1-1/8″ diamond core drill bit for granite marble stone 1 pc. 5/8-11 thread fits on most popular high-speed grinders. Use on the job site without using water. Aggressive cutting on granite and engineered stone.
10-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 10″ Diameter x 17″ Length
- The super-plus quality wet diamond core bits offers the best lifetime available on market. Length 17″ long to produce 13-1/2″ core. Segment height 0400″. Laser wielded. 1-1/4-7 thread.
1-7/8-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 1-7/8
- 1-1/4-7 thread. Laser wielded. The super-plus quality wet diamond core bits offers the best lifetime available on market. Segment height 0400″. Length 17″ long to produce 13-1/2″ core.
Concord Blades CBD04000HP 4 Inch Laser Welded Dry/Wet Diamond Core Drill Bit
- This core bit is used for general purpose dry drilling on a variety of soft brick and concrete block using either a handheld core drill or a core drill rig. Not recommended on concrete and reinforced concrete. 4 inch laser welded dry/wet diamond core drill bit with 9 inch tube length is of professional quality for dry masonry with laser welded individual segments to hold up under extreme heat and cutting pressure. Specially formulated professional quality turbo segments provide fast cutting and long life. Barrel vents increase air flow to dissipate heat and cool the core bit.
Anself Dry and Wet Diamond Core Drill Bit 1″ x 15.7″
- Its durable construction will ensure smooth operation of the drills. We also provide bits of other sizes to meet different drilling needs. Size 1″ x 157″ (diameter x l). Our high-quality 1″ x 157″ drill bit is perfect to be used with electric core drills for drilling on granite, hard stone, concrete, reinforced concrete, and other hard surfaces. Delivery includes 1 x diamond core drill bit.
DPT 3/4-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 3/4″ Diameter x 17″ Length
- Segment height 0400″. Laser wielded. 5/8″-11 thread. Length 17″ long to produce 13-1/2″ core. The super-plus quality wet diamond core bits offers the best lifetime available on market.
4-1/4″ Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 4-1/4″ Diameter x 17″ Length
- The super-plus quality wet diamond core bits offers the best lifetime available on market. Length 17″ long to produce 13-1/2″ deep core. Segment height 0400″. Laser wielded. 1-1/4-7 thread.
6-Inch Wet Diamond Core Drill Bit Hole Saw for Concrete and Asphalt, Super Plus Quality, 6″ Diameter x 17″ Length
- 1-1/4-7 thread. The super-plus quality wet diamond core bits offers the best lifetime available on market. Laser wielded. Segment height 0400″. Length 17″ long to produce 13-1/2″ core.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
