20 Nov 2018
18 Coolest Skew Chisels
Crown 250W 3/4-Inch Oval Skew Chisel - High speed steel. Exceptional quality tools from crown hand tools ltd, sheffield, england. Made with heavy duty brass ferrules. Rockwell 62/64. Lasts up to 6 times as long as carbon tools.
1/4″ Robert Sorby #864H Micro Skew Chisel - A small skew sized for the delicacy and control required for smaller projects and fine detail work. Skew has a 6-1/4″ handle and is 10″ long overall. Ash handle. Made in england. High speed steel (hss) blade.
3/4″ Robert Sorby #809H Oval Skew Chisel - Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. This hss 3/4″ oval skew will keep a sharpened edge about six times longer than carbon steel and resist “blued” softening from overheating during grinding or from heavy turning. Overall lengths 17″ to 21″. .
3/4″ Robert Sorby #540 Left Sheaf River Skew Chisel - Bevel ground at 30 degree skew and a 25 degree bevel. Made by a small tool manufacturer in the czech republic. Contains both right and left skew chisel 26 mm 1 1/16″ wide. Handles are made from super hard european hornbeam. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59.
Crown 249 1/2-Inch Oval Skew Chisel - Made from m2 high speed steel (rockwell 62/64). Exceptional quality tools from crown hand tools ltd, sheffield, england. Beech handle. Gives up to 6 times the edge life of carbon tools.
Crown 2222 No.2 1/8-Inch 3-mm Skew Chisel - Exceptional quality tools from crown hand tools ltd, sheffield, england. Rosewood handle. Finest carbon steel. Rockwell hardness 57/60.
Narex Right & Left 6 mm 1/4″ Skew Paring Chisels 811106/811156 - Made by a small tool manufacturer in the czech republic. Bevel ground at 30 degree skew and a 25 degree bevel. Contains both right and left skew chisel 6 mm 1/4″ wide. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Handles mades from super hard european hornbeam.
Crown 251 1-Inch Oval Skew Chisel - Made from m2 high speed steel (rockwell 62/64). Rosewood handle. Gives up to 6 times the edge life of carbon tools. Exceptional quality tools from crown hand tools ltd, sheffield, england.
Robert Sorby Micro Skew Chisel Blade - Rosewood handle. Made from m2 high speed steel (rockwell 62/64). Exceptional quality tools from crown hand tools ltd, sheffield, england. Gives up to 6 times the edge life of carbon tools.
Hurricane Turning Tools, Woodturning Three Piece Skew Chisel Set, 1/2″ Skew Chisel, 1″ Skew Chisel, 1 1/2″ Skew Chisel, High Speed Steel - They are made out of high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. Compare these tools to others that sell for two to three times the price. This set consists of three separate woodturning skew chisels made from high speed steel. The handles are made from solid ash. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. Hurricane turning tools are made in one of the world’s largest turning tool factories. These tools compare with any hss tool on the market and are sold throughout the world. Ships ready to be sharpened.
Narex 5 Piece Set Starter Carving Chisels 3 Gouges, V Tool and Double Bevel Skew Chisel 869200 - Starter 5 piece carving set manufactured by small tool maker in czech republic. All chisels blades are made from hardened carbon steel and heat treated to hrc 55. Comes with lime wood blank to practice carving techniques. Set includes single bevel skew, shallow gouge, carving gouge, deep gouge and straight v tool. Handles are oiled european beech with ergonomic octagonal cross section.
Straight or Curved Edge Sharpener Tormek SVS-50. The Multi-Jig For Sharpening Skew Chisels, Gouges, Beading Tools, and More. Sharpens Curved or Straight Blade Edges. - Made for turning skew chisels with a straight or curved edge. Use for straight carving gouges up to 2-inches wide. Can grind both bevels symmetrically when turning jig upside down. Consists of two seats, one open and one closed. Can also be used for oval section skews.
Narex Right & Left 26 mm 1 1/16″ Skew Paring Chisels 81126/811176 - Contains both right and left skew chisel 26 mm 1 1/16″ wide. Bevel ground at 30 degree skew and a 25 degree bevel. Made by a small tool manufacturer in the czech republic. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Handles are made from super hard european hornbeam.
Crown 252 1-1/4-Inch Oval Skew Chisel - Rosewood handle. Gives up to 6 times the edge life of carbon tools. Exceptional quality tools from crown hand tools ltd, sheffield, england. Made from m2 high speed steel (rockwell 62/64).
PFEIL “Swiss Made” 12mm, #1 Skew Chisel, Double Bevel - This skew-cut profile chisel is a double beveled grind with two rounded heels that allow the rocking motion necessary in controlling depth of cut. Pfeil carving tools and sets are “swiss made”. . Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. “swiss made” implies reliability and precision.
Pinnacle Cryogenic 1″ Oval Skew Chisel - Each tool is mounted in a european ash wood handle. The cryogenic treatment process utilizes sub-zero temperatures, down to -300°f, creating a more uniform grain structure that allows you to hone to a fine edge providing you with a tool that will hold an edge that will last 2-3 times longer that standard tools. Used much like a traditional skew chisel for beading and finish cuts, the rounded sides allow for easy movement across the tool rest. Blade length is 6- 1/2″, handle length 10- 1/8″, overall length 16- 3/8″. Manufactured in sheffield exclusively for woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools, without the cost.
3/4″ Robert Sorby #810 Skew Chisel Blade - Rectangular section profile gives it more weight. A tang collet adapter (#85406) is required for use with the sovereign system. Superb for large spindle work, such as kitchen table legs or newel posts. Made in england. The robert sorby standard skew blade is for turners who prefer to make their own turning tool handles, or for use in sorby’s sovereign system handles. Scraper is tanged at one end and measures approximately 8″ long overall. High speed steel (hss) blade is 1/4″ thick. Standard tip grind.
Narex Lathe Wood Turning Right Bevel Skew Chisel 4 mm X 14 mm X 105 mm Blade Alloyed Tool Steel 60 Hrc 817910 - Overall length of tool is 345 mm (14″). This lathe tool is made by a small tool manufacturer in the czech republic. Handles are natural varnished european beech wood. Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. Right bevel skew chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.