Yost 938 All-Steel Combination Pipe and Bench Vise with 360 Degree Swivel Base
- A flat portion on the body acts as a reinforced anvil and an additional work surface. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. Both the top jaws and pipe jaws are grooved for enhanced grip. Hand-tightening the two lock knobs on the base secures its position. The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. The base has three 0. 56″-diameter holes for mounting hardware (not included). The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. The yost vises 938-as 8″ medium-duty all-steel combination pipe and bench vise has a 360-degree swivel base and mounts to a workbench to provide clamping action. The 360-degree swivel base adjusts the direction of the jaws for proper placement. The top jaws are made of hardened steel and can be replaced when worn, and the built-in pipe jaws are cast steel. The body is made of cast steel and has a black painted finish for mild corrosion protection.
4800R, Reversible Bench Vise, 8″ Jaw Width, 9-1/4″ (14-1/2″ Reversed) Jaw Opening, 4-3/4″ Throat Depth
- Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life. Jaw opening expands to an incredible 14-1/2″ when reversed. When in normal position, the jaw opening is 9-1/4″. Dual lock-downs and a 360° swivel base. Built-in pipe jaws handle a range of pipe sizes.
WEN 456BV 6-Inch Heavy Duty Cast Iron Bench Vise with Swivel Base
- Onboard 4. 3 by 3. Our crosscut non-slip 6-inch jaws open up to a spacious 6-5/8 inches, keeping your workpieces perfectly still for sawing, drilling, polishing, grinding, or whatever else you need to get done. The swiveling base pivots over 125 degrees to meet the needs of any project, with three 12 mm mounting holes to attach to the table of your choice. 6-inch anvil provides metalworkers an aid for forging tools. Remember when your bench had a vise on it keep your workpieces secure with the wen 6-inch bench vise. And because its a wen product, your bench vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember wen. Made from heavy duty powder-coated 36,000 psi cast iron, the wen bench vise grips tightly onto your workpieces, providing over 3700 pounds of clamping force.
RIDGID 40195 Model BC410 Top Screw Bench Chain Vise, 1/8-inch to 4-inch Bench Vise
- Crank handle is anchored to the base of the bench vise. Bench vise has a 1/8-inch to 4-inch (6 mm to 100 mm) pipe capacity. Pipe vise weighs 14-3/4 pounds (35 kg). Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Rugged, cast-iron base features a handy pipe rest and bender.
3” Jaws Aluminum Table Bench Top Vise Vice Universal Swivel Clamp-On
- Cast aluminum alloy body, locking 360 degrees rotating swivel base, jaws with rubber, clamp-on with rubber. Jaws wide 3″(78mm) jaws opening 2″(50mm) clamp opening for table mounting 2″(50mm) overall dimension 10in(tall) x 6in(long) x3in(width) product weight 2lbs.
Wilton 11106 Wilton Bench Vise, Jaw Width 6-Inch, Jaw Opening 6-Inch
- Double lock down swivel base. Made from high strength steel. Large anvil work surface.
Woodworking Vise, 10.5″ Heavy Duty Steel Front Bench Vise with Mounting Screws Metal Clip Clamp for Wood Working Engineering Welding
- 【Professional design】precision machined castings with perfectly aligned 7-inch guide bars, makes it easy to work and holds things more firmly, ideal for wood working and general clamping applications. 【Widely used】useful for woodworking, engineering and welding slots in base plate so you can fix the vice to a work table or machine table. 【well built quality】made of high quality steel, resistant to corrosion and rust, sturdy surface greatly reduces the wear rate, and the spray coating effectively relieves the oxidation reaction the wood bench vise can be used for many years. 【Easy to operate】simply pull up on the handle and hold, this will cause the vise nut to disengage adjust the jaws to the appropriate opening and let go of the handle a simple turn of the main handle will engage the screw and tighten the vise on the product. 【Simple installation】predrilled bench mounting screws for permanent installation, designed to mount to the face of wood work benches, build your own heavy duty woodworking table vise.
Max Orbit Quick Release Heavy Duty Engineers Bench Vise 2 Ton Semi Precision (6 inch)
- Size-maximum opening 5-7/8″, throat 2-3/4″ approximately 25 lb. Speed, quick release and clamping system. Strong, creat large clamping force much easier. Solid, quality cast iron body, steel spindle with no split nut. Smooth, 100% cnc machining parts, semi precision finishing.
Grizzly Industrial G7062-5″ Multi-Purpose Bench Vise
- Base swivels for greater versatility and there-inch even an anvil face to top it all off. Jaw rotate 360 degrees for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pip jaws. This multi-purpose bench vise does it all jaw rotate 360 degrees for unlimited work piece positioning and holds flat stock as well as round stock with.
IRWIN Tools Multi-Purpose Bench Vise, 5-Inch (4935505)
- Bench vise with rotating pipe jaws and a 5-inch width. Fused steel handle makes adjusting a cinch. Swivel base allows for 360-degree rotation. Incorporated anvil keeps vise steady while you work. Jaw width- 5 inches / 12 cm throat depth- 3 inches / 7 cm jaw capacity- 49 inches / 12 cm swivel base- 360 dregree.
Yost Vises 910-AS 10″ Heavy Duty Steel Bench Vise
- 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place. Cast steel body is painted black for mild protection against corrosion and has flat portion that acts as a reinforced anvil and an additional work surface. Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip. Bench-mount vise with 10″ nominal top jaw width and 7/8″- to 2-5/8″- diameter pipe capacity provides clamping action for light-duty applications. Main screw that controls the jaws is covered by a bar to protect it from damage.
Craftsman 5 in. Bench Vise
- From every angle, the vise gives you a tight grip and a stable reliable hold, and the instant-action screw clamps down fast to hold irregular materials right where you want them. It has a precision machined anvil top that can take a pounding. 5 in. When you need to work on rounded shapes, a grippy throat firmly secures pipes and cylinders from 1/8 to 2-1/2 inches. Weight 29 lbs. Jaw width 5. Bench vise has a solid grip timesaving reversible plates that are quick and easy to switch out 180-degree swivel sets up fast, holds tight hardy machined anvil top can take the blows grippy throat secures rounded shapes up to 2 1/2″ diameter bolts down for a stable reliable hold instant-action screw for quick hold substantial 5 ¾ in. For difficult detail work, an easily adjusted 180-degree swivel lets you work at the best angle for every task. Its reversible plates change out quickly and easily so you can secure a wide variety of materials without wasting time. Capacity v-groove for added gripping power height 7. Bench vise gives you maximum leverage with a smooth chromed handle. 5 in. Bench vise has the timesaving features you want. The trustworthy craftsman 5-in. This sturdy vise holds on tight, with a grip strong enough to help you get the toughest jobs done. Versatile craftsman 5-in. This solid 5-in.
RIDGID 40210 Model BC610 Top Screw Bench Chain Vise, 1/4-inch to 6-inch Bench Vise
- Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Rugged, cast-iron base features a convenient pipe rest and bender. Bench vise has a 1/4-inch to 6-inch (8 mm to 150 mm) pipe capacity. Pipe vise weighs 24-1/2 pounds (111 kg). Crank handle is anchored to the base of the bench vise.
Goplus Bench Vise Swivel 3″ Tabletop Clamp Vice Tilts Rotate 360° Universal Work
- 【multifunctional use】this vise used to secure an object to allow work to be performed on it it is perfect for holding small parts in jewelry, hobby, model making, electronics and other applications. 【Easy to assemble and carry】all assembly hardware and parts are included clear and brief instruction make it much easier to put together no professional tools are needed the lightweight design makes convenient for you to move. 【Adjustable degree】it features a rotation of 360 degrees and a tilt of 45 degrees, which is very convenient to turn in any direction after mounting it provides the best angle for your work. 【Universal tool】 this vise features sturdy pipe jaws with a 2″ capacity for general purpose and light-duty work and these jaws are padded with rubber soles, which secure your item in the vise comfortably. 【Sturdy material and design】this bench vise is constructed with heavy duty aluminum to deliver incredible strength for gripping different kinds of objects it is ideal for providing maximum clamping and holding power to keep the work piece steady.
Craftsman 4″ Bench Vise with 180 Degree Swivel
- Reversible jaw faces are smooth on one side for no-mar gripping, serrated on the other for a secure hold. Precision machined anvil for incredible strength and high performance. Rapid-acting vise screw for fast opening and closing. V-grooves for extra gripping strength.
SPEEDJAW 92746 4-Inch Low-Profile Bench Vise
- Detachable base mount, unit clamps onto a 360-degree inscribed posi-clock disc that allows for precise rotation and lets the vise be stored out of the way when not in use. Rapid opening, rapid open and close feature saves time with fast adjustability. Cast ductile iron, vise is made from high-strength, powder-coated cast ductile iron that can stand up to long use. Ratcheting handle, ratcheting handle allows fine adjustment and increased mounting options beyond the edge of a work bench. Durable steel jaws, durable tool steel serrated vise jaws are replaceable and provide a secure, non-slip grip. 4-inch jaws, 4-inch wide jaws open to a maximum of 3-7/8-inches with a 1-1/2-inch throat depth. Compatible vise pads, compatible with speedjaw 93095 curved, 93096 ductile iron, and 93097 non-marring vise pads.
Grant Tools Professional Bench Vise Fixed Base (4″ and 6″ Available) | 2 Vise Jaws Included | With Each Vise Sold 1 Solar Light is Donated to a Child Abroad in Need via Extend The Day (4″)
- Smooth operation the chrome-plated spindle and nut provide easy use and quick release while working with wood, pipes, and other materials. Corrosion-resistant you can rely on this table clamp to withstand harsh conditions because it’s powder-coated for high corrosion-resistance. Extremely durable this vise grip is manufactured with high-grade cast iron, strong enough for any project you take on from your garage bench or shop bench. Supports charity proceeds from every purchase go to extend the day, each vise sold contributes one solar light to a child in need abroad. Reversible steel jaws each bench vise comes with a pair of 4″ reversible, hardened, and tempered jaw pads.
HFS Heavy Duty Bench Vise – 360 Swivel Base with Lock, Big Size Anvil Top (4”)
- Incredible clamping power. Durable cast steel construction. Double locking swivel base. Power serrated steel jaws and clamps for great grip and strength. Replaceable, hardened, forged steel jaws.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
