YG-1 E2237 Cobalt Steel Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 3″ Overall Length, 1″ Cutting Diameter, 0.5″ Shank Diameter
- Non-center-cutting design supports peripheral milling and finishing. Corner rounding end mills are designed to take the edge off sharp corners. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Four flutes produce a better finish than fewer flutes.
YG-1 E2237 Cobalt Steel Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 2.5″ Overall Length, 0.5″ Cutting Diameter, 0.375″ Shank Diameter
- Corner rounding end mills are designed to take the edge off sharp corners. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Non-center-cutting design supports peripheral milling and finishing. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Four flutes produce a better finish than fewer flutes.
HHIP 5800-4060 3/16″ x 1/2″ HSS Corner Rounding End Mill
- ~ Radius is 1/2″. ~ Form-relieved type can be sharpened many times without changing the form. ~ formed radius cutter. 3/16 x 7/8″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ Shank diameter is 1/2″. ~ Right hand cut. ~ Mill diameter is 7/8″. ~ Overall length is 3″.
Melin Tool RCMG-M-M Carbide Corner Rounding End Mill, Metric, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 76mm Overall Length, 3mm Cutting Diameter, 12mm Shank Diameter
- Radius is form relieved. Round shanks allow use with a wide variety of toolholding systems. Can provide uniform finish on corners. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
RedLine Tools RCR681310A – Double End, 2.5000″ Overall Length, .1250″ Radius, .3750″ Shank Diameter, 3 Flute, AlTiN, Carbide, Corner Rounding End Mill
- Number of flutes 3. Shank diameter 3750″. Made in the usa. Radius 1250″. Overall length 25000″.
EM-RC8X 1/4″ radius Corner Rounding End Mill- 1/2″ Shank, High Speed Steel
- Shank diameter 1/2″. Largest diameter 1″. Radius 1/4″. Overall length 3 1/8″. High speed steel.
HHIP 5800-4160 1/2″ x 3/4″ HSS Corner Rounding End Mill
- 1/2 x 3/4″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ Right hand cut. ~ Formed radius cutter. ~ Form-relieved type can be sharpened many times without changing the form. ~ Overall length is 3-7/8″. ~ Shank diameter is 3/4″. ~ mill diameter is 1-1/2″. ~ Radius is 1/2″.
RedLine Tools RCR681342 – Double End, 3.5000″ Overall Length, .2362″ Radius, .6250″ Shank Diameter, 3 Flute, Uncoated, Carbide, Corner Rounding End Mill
- Made in the usa. Number of flutes 3. Overall length 35000″. Shank diameter 6250″. Radius 2362″.
Melin Tool BRMG-S Carbide Micro Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 1.5000″ Overall Length, 0.047″ Cutting Diameter, 0.125″ Shank Diameter
- Can provide uniform finish on corners. Radius is form relieved. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.
HHIP 5800-4030 3/32″ x 3/8″ HSS Corner Rounding End Mill
- ~ Mill diameter is 1/2″. . ~ Overall length is 2-1/2. ~ Shank diameter is 3/8″. ~ Formed radius cutter. ~ Form-relieved type can be sharpened many times without changing the form. ~ Radius is 3/32″. 3/32 x 3/8″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ Right hand cut.
RedLine Tools RCR681345A – Double End, 3.5000″ Overall Length, .2500″ Radius, .6250″ Shank Diameter, 3 Flute, AlTiN, Carbide, Corner Rounding End Mill
- Made in the usa. Shank diameter 6250″. Radius 2500″. Number of flutes 3. Overall length 35000″.
Melin Tool RCMG-M-M Carbide Micro Corner Rounding End Mill, Metric, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 63mm Overall Length, 1mm Cutting Diameter, 6mm Shank Diameter
- Can provide uniform finish on corners. Radius is form relieved. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.
Micro 100 CRE-187-035 3 Flute Corner Rounding Double End Mill, 0.060″ Minor Diameter, 3/16″ Shank Diameter, 0.0350″ Radius, 2″ Overall Length, Solid Carbide Tool
- Designed and engineered with a formed radius for milling a specific radius in most ferrous and non-ferrous type materials. The micro 100 cre-187-035 uncoated, solid carbide, 3 flute, corner rounding, double ended end mill. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. End mills can be utilized for both roughing and finishing. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. . For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Manufactured with close tolerances to ensure ultimate precision and performance. Hard milling end mill. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates.
RedLine Tools RCR681280A – Double End, 2.5000″ Overall Length, .0625″ Radius, .2500″ Shank Diameter, 3 Flute, AlTiN, Carbide, Corner Rounding End Mill
- Overall length 25000″. Number of flutes 3. Made in the usa. Shank diameter 2500″. Radius 0625″.
HHIP 5800-4040 1/8″ x 1/2″ HSS Corner Rounding End Mill
- ~ Form-relieved type can be sharpened many times without changing the form. ~ Shank diameter is 1/2″. ~ Right hand cut. ~ overall length is 3″. ~ Formed radius cutter. ~ Radius is 1/8″. 1/8 x 5/8″ high speed steel corner rounding end mill ~ intended for use in milling rounded corners, etc. ~ Mill diameter is 5/8″.
EM-RC16X 1/2″ radius High Speed Steel Corner Rounding End Mill- 3/4″ Shank
- Largest diameter 1 1/2″. Overall length 4 1/8″. Shank diameter 3/4″. High speed steel. Radius 1/2″.
TTC PRODUCTION 8 Piece H.S.S. Corner Rounding End Mill Set – Tool Material: H.S.S.
- Includes (1) each of the following sizes 1/16″ & 3/32″ with 3/8″ shank (1) each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 5/16″ & 3/8″ with 1/2″ shank wooden stand. .
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
