Hammer Drive Concrete Anchor 1/4″ x 1 1/2″ Qty: 25
- Mushroom head. Threaded end is chamfered for ease of starting nut. Length identification head marks.
Hammer Drive Concrete Anchor w/Stainless Nail 1/4″ x 2″ Qty: 50
- Hammer drive concrete anchor w/stainless nail 1/4″ x 2″ qty 50.
Vestil AS-383-4PK Concrete Anchor Four Bolt Kit, 3/8″ Diameter x 3″ Length
- Sleeve length provides added security. Anchor design makes installation quicker and easier. Vestil concrete anchor four bolt kit includes concrete anchor, bolt, washer and nut. Zinc plated steel provides a strong anchor point. Measures 3/8-inches diameter by 3-inches length. Anchor construction hold units in place in the most demanding environments.
Guardian Fall Protection 10710 3-Foot Loop and D-Ring End Concrete Anchor Strap with Protective Sheathing
- As always, make sure that your anchor strap is attached to a structure capable of supporting 5,000 lbs. Features• 3 feet in length• inexpensive anchor solution• disposable and intended for one time use only• make sure that your anchor strap is attached to a structure capable of supporting 5,000 pounds• sheathed in heavy duty nylon webbingguardian offers the most extensive line of concrete anchor straps available in the market today. A versatile product, concrete anchor straps are gaining popularity as an inexpensive anchor solution. As a disposable anchor point, our straps can be used in other applications such as wood framing members, rebar, pipe racking, etc. The guardian fall protection “concrete anchor strap” is sheathed in heavy duty nylon webbing to protect the inner core webbing from abrasion and wear.  The concrete anchor strap is good for one use and must be cut off when the job is complete. Guardian fall protection can custom design and fabricate concrete strap anchors to meet your needs.
FallTech 7440 Temporary Wedge Concrete Anchor – Reusable 3/4″ Multi-Directional Temporary Anchor for Existing Cured Concrete, Rated to 5,000 lb, Natural
- Fall protection is all we do. That is why. And, when it comes to worker safety, there are no second chances. At falltech, we engineer innovative fall safety solutions as though lives depend on it. Falltech concrete anchors have been designed for applications where traditional anchors fall short. And we take it seriously. We know that the stakes are high. Because they do. We train and staff fall protection experts that understand problems, not just fall protection products, and can identify fall safety solutions that save lives. Whether a temporary solution is needed for pre-cast or pour in place concrete, or if a permanent yet removable anchorage is needed, falltech concrete anchors provide expected solutions. Advanced technical design and rigorous quality testing are the backbone of falltech’s manufacturing process.
Pro-Twist 3/16″ x 2-1/4″ Concrete Screw Anchor, 1/4″ Hex Washer Head, 100 Count Bo
- . Pro-twist concrete anchors are intended for light duty anchoring, door and window frames, thresholds, plumbing straps and electrical conduit.
Hammer Drive Concrete Anchor 3/16″ x 7/8″ Qty: 25
- Free concrete drill bit included. 100 pieces per box. High-low thread, sharp point. Mushroom head.
ITW Brands 24293 15 Pack, 5/16″ x 3″, Steel, Hex Washer Head, Large Diameter Tapcon Concrete Anchor
- . 5/16″x3″, steel, hex washer head, large diameter tapcon concrete anchor.
Simpson Strong Tie THD37300H 3/8-Inch by 3-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 50 per Pack
- Designed to install using standard ansi tolerance drill bits. Tested per ac193 to ensure outstanding performance in both cracked and uncracked concrete. Specialized head treated process creates superior hardness. Easy post-installation inspection head stamped with anchor length in inches. Threads along the length of the anchor undercut the concrete and efficiently transfer the load to the base material.
Werner A510000 Reusable Concrete Anchor, Drill hole 3/4″ x 3″ deep
- Features• fully reusable, easy to insert and remove• fits drill hold of 3/4″ x 3″ deep• min 3000 psi concrete• meets ansi and osha requirementsthe reusable concrete anchor is a highly portable anchorage solution for concrete construction.
ITW Brands 11413 3/8×3 Concrete Hex Anchor
- . 3/8″ x 3″, steel hex washer head large diameter tapcon concrete anchor.
Concrete Anchors (Set of 50)
- . Dimensions overall height, top to bottom -0. Product type -hardware. Acc230 features -concrete and cinder block installation. 3″. -Comes with concrete anchor. -Security hardware is not included. Overall product weight -1 lbs. Color -beige.
Simpson Strong-Tie THDB62500H Titen HD Concrete Anchor 5/8 x 5″, 10 ct.
- 5/8″ x 5″. Use with 5/8″ diameter drill bit. Use with 15/16″ wrench or socket. 10 per box. Zinc plated, carbon steel, heat treated.
Arrow Shed AK100 Concrete Anchor Kit
- A 1/4-inch masonry drill bit is also included. The ak100 includes four steel corner gussets and perimeter claps that lag bolt directly to the slab. With this kit, your arrow shed will get the protection needed against strong winds. This anchor kit fits most arrow buildings. If you have a concrete slab as a base for your arrow building, consider the ak100 concrete anchor kit to help anchor the shed to the slab.
uxcell M6 x 100mm 304 Stainless Steel Sleeve Anchor Concrete Expansion Eye Bolt
- Bolt length 100mm / 4″ overall length 120mm / 47″. Package content 1 x anchor eye bolt punch diameter 10mm / 04″. Sleeve tube size 10mm x 80mm / 04″ x 3″ (dl) thread diameter m6 / 024″. Product name anchor eye bolt material 304 stainless steel weight 51g. Eye size 16mm x 27mm x 55mm / 063″ x 106″ x 022″ (inner diaodt) color silver tone.
ITW Brands 24325 1/4″ x 2.25″, Steel, Hex Washer Head Concrete Anchors
- 75 pack, 1/4″ x 2. . 25″, steel, hex washer head tapcon concrete anchors.
Hammer Drive Concrete Anchor 1/4″ x 2 1/2″ Qty: 100
- Hammer drive concrete anchor 1/4″ x 2 1/2″ qty 100.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
