16 Top Cross Peens

 

Truper 30939 3-Pound Cross Peen Hammer, Hickory Handle, 16-Inch - 16-inch durable hickory handle is an industry standard for strength and comfort. Used for shaping and bending unhardened metals. Shock absorbent “poly guard” for overstrike protection. Truper 30939, stock up on quality truper tools for other projects today. Crp-3h, 3-pound cross peen hammer.

 

Picard 032700-0500 Schlosserhammer Riveting Cross Peen Hammer, 18 oz - The picard 3 component fiberglass handle, cross peen hammer is made from c45, high quality steel. It will replace many hammers that a person uses all the time. It has excellent weight distribution making it great for many different uses. This is a hammer that once you start using, you will find more and more uses for it. It features a hardened face and cross peen making it suitable for hitting almost any non hardened steel material. This hammer is also known a schlosserhammer or german pattern cross peen hammer. It is smaller than a hand sledge or drilling hammer but bigger and more substantial than a typical claw hammer.

 

Martin 168HC High Crown Cross Peen Finishing Body Hammer with Wood Handle, 12″ Overall Length - . 12″ overall length. 1-9/8″ face diameter, 2-1/4″ radius, peen end 3/16″ by 1″. High crown cross peen finishing body hammer with wood handle. 5″ overall head length. Ideal for forming radiuses, contours and curves restoration, bike tanks.

 

SecuTec Cross Peen Hammer - Hickory shaft this can withstand three or four times more stress than standard ash shafts, due to the long fibers in the wood structure. Wedge bolt the ring wedge, countersunk head and bolt thread are combined in one single component. The diameter of the wedge bolt is larger than the din eye to secure the head for durable long term use. Face convex polished with durable bevel for safe working with no fractures, even when hitting hard edges or mishitting the hammer. Head forged in the die using picard special steel and quenched to a greater extent than required by din standards. Tempered and painted black. Made of steel, it effectively protects the shaft from mishits. Protective sleeve on the shaft form fitted with no protruding edges on the shaft. Hickory has long been appreciated for vibration dampening and durability. The stabilization collar fitted all the way around the underside of the hammer head also secures the head-shaft connection against the effects of leverage. Safety system with no protruding parts. This increases stability.

 

Bernstein 7-112 Cross Peen Hammer, DIN 1041, 100 g by Bernstein Werkzeug GmbH - Bernstein 7-112 cross peen hammer, din 1041, 100 g. Anti vibration sleeve and collar. Bernstein 7-119 cross peen hammer, din 1041, 500 g. Reduced rebound. Bernstein 7-114 cross peen hammer, din 1041, 200 g.

 

2-1/2 Lb. Cross Peen Hammer - Head length 60mm (2-3/8″). Face diameter 10mm (3/8″). Made in mexico. Chiseled shaped cross peen end. Hammer for watchmakers 80mm swiss style watchmakers rivetting hammer head length 3-5/32″, 80mm watchmakers hammer, swiss style lightweight riveting hammer with an overall weight of 25oz this is one of the various sizes we carry in this style of hammers the head of the hammer is finely polished forged steel head, with a cross peen end, fitted on hardwood handle a very well made hammer is used for fine precision miniature work, in jewelry, watch metal working applications jets product # 0803-212.

 

Martin 121G Carbon Steel 2lbs Cross Peen Engineer/Blacksmith Hand Hammer, 15-1/2 Overall Length by Martin - Reduced rebound. Bernstein 7-119 cross peen hammer, din 1041, 500 g. Martin 121g carbon steel 2lbs cross peen engineer/blacksmith hand hammer, 15-1/2 overall length. Sw-stahl 50106l cross peen hammer 800 g. Anti vibration sleeve and collar.

 

Ampco Safety Tools H-42FG Cross Peen Hammer, Non-Sparking, Non-Magnetic, Corrosion Resistant, 3.5 lb, 15″ Length - Non-magnetic for use near highly sensitive magnetic equipment mri and clean room environments corrosion resistant even in the most severe environments. Non-sparking for use where flammable or combustible vapors, liquids, dust or residue are present. Non-sparking, non-magnetic & corrosion resistant factory mutual approved, made in the usa, beryllium free.

 

Woodstock D2670 4-Ounce Cross Peen Hammer - These tradtional cabinetmakers hammers are perfect for upholstery work and all tack and brad nailing. The narrow face allows starting tacks while holding between thumb and fingers. 8 oz size also available from diefenbacher toolsl. The opposite round face drives tacks and nails home.

 

Bernstein 7-114 Cross Peen Hammer, DIN 1041, 200 g by Bernstein Werkzeug GmbH - Reduced rebound. Anti vibration sleeve and collar. Hickory handle. Bernstein 7-114 cross peen hammer, din 1041, 200 g. Bernstein 7-116 cross peen hammer, din 1041, 300 g.

 

Martin 168FG Cross Peen Finishing Hammer, Fiberglass handle, Round faces 1 9/16 ” diameter, Peen end 3/16 ” x 7/8 ” heads, 5 ” overall head length, Weight .91 pounds - 168fg type handle fiberglass (part# 168fg) this item features -used to bump odd fender or bumper contours. -Price is for 1 each. -Type tinner’s hammer. -Wt. 0. -Head material forged alloy steel. -head length 5 in. 91 lb. -Face diam 1 9/16 in. -Handle length 12 in. -Quantity 6 per pack.

 

Cross Pein Hammers – 3-lb cross peen hammer wfiberglass handle - 027-1196600 features -the striking face is designed for general blacksmith work in striking unhardened metal. Dimensions overall product weight -3 pounds. . Generic dimensions -handle length 16 in. -The peins are used for shaping and bending unhardened metal. -brand name jackson®. -Eye size 3/4 x 1 in.

 

Estwing E6-32CP Smooth Face Cross Peen Hammer, Nylon Vinyl Shock Reduction Grip, 32-Ounce - . The head and handle are forged in one piece and have an attractive blue uv coating. This tool has unsurpassed balance and temper. The cross peen hammer has a bonded and molded shock reduction grip.

 

Seymour 41574 HB-4 4 lb. Cross Peen Hammer with 16″ Hickory Handle - Seymour 4 lbs. Also used to shape block, brick, and stone. Legacy part number hb-4. Chamfered edges. Head cross peen hammer with 16″ hickory handle used to strike, shape, and bend unhardened metal.

 

Martin 122G Carbon Steel 2-1/2lbs Cross Peen Engineer/Blacksmith Hand Hammer, 15-1/2″ Overall Length - Made in u. Cross peen engineer/blacksmith hand hammer. “. Hh45 replacement handle. Warning never use hammers with “mushroomed” heads. They may chip and cause injury. 3. Polished faces. A. 2lbs weight with handle. Note if a hammer head should loosen at any time, return it for handle replacement or a new hammer. Ball diameter 1-9/16″. Carbon steel head through hardened. Face 1-11/32″. 5-1⁄16″ head length. American hickory handle natural shock absorber. Industrial black head finish. “always wear safety goggles. S. Peen 3/16″.

 

Bernstein 7-119 Cross Peen Hammer, DIN 1041, 500 g by Bernstein Werkzeug GmbH - Bernstein 7-119 cross peen hammer, din 1041, 500 g. Anti vibration sleeve and collar. Reduced rebound. Bernstein 7-114 cross peen hammer, din 1041, 200 g. Bernstein 7-116 cross peen hammer, din 1041, 300 g.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.