15 Most Wanted Concrete Drills

 

Hitachi 725650 78-Inch x 10-Inch x 12-Inch Straight Shank 4 Concrete Drill Bit

Hitachi 725650 7/8-Inch x 10-Inch x 12-Inch Straight Shank 4+ Concrete Drill Bit

Hitachi 725650 7/8-Inch x 10-Inch x 12-Inch Straight Shank 4+ Concrete Drill Bit - High tolerance milled shank provides perfect fit. High quality carbon hardened steel. Cnc controlled manufacturing ensures 100% quality consistency.

 

6 Diamond WET Coring Bit - Concrete Core Drill by BLUEROCK Â Tools

6″ Diamond WET Coring Bit – Concrete Core Drill by BLUEROCK ® Tools

6″ Diamond WET Coring Bit – Concrete Core Drill by BLUEROCK ® Tools - This is a brand new “wet” type concrete coring bit. It uses the standard 1-1/4″ threads used by most concrete core drills. It’s designed to drill through reinforced concrete masonry, assorted brick and block as well as other types of rock. Thanks for the interest. The overall length is around 17″ with the inside measuring around 14. 5″ in depth. It’s a high quality bit that’s made to last. If you have any questions, please feel free to contact us. New, 6″ bluerock tools diamond wet coring bit for core drill.

 

Cayken 10 Diamond Core Drill Rig 58HP 435W With Adjustable Angle Stand For Drilling Reinforced Concrete Or Brick

Cayken 10″ Diamond Core Drill Rig 5.8HP 435W With Adjustable Angle Stand For Drilling Reinforced Concrete Or Brick

Cayken 10″ Diamond Core Drill Rig 5.8HP 435W With Adjustable Angle Stand For Drilling Reinforced Concrete Or Brick - 8 hp, 110 v, 60 hz, 435 w, 580 rpm. Will cut up to 10-inch diameter holes. Drill features safety clutch and overload protection. Soft start electronic current limiterincludes wrench set. X 7 tpi. Built-in leveling bubble. Stand specificationsadjustable aluminum stand for drilling at 0 to 45 degrees. Drill specificationsmotor specs 5. Ce/rohs/iso90001 certified. This drill will cut up to 10-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. Top and rear handles. Larger mast designed to accommodate large-diameter bits and withstand high torque. Drill bit not included. Four (4) leveling bolts on base. Four (4) adjustable slide bearings. 8hp 435w with adjustable angle stand for drilling reinforced concrete or brickthe cayken ck-kcy-2550-200f is designed for wet or dry core drilling and comes with the cayken 200 adjustable aluminum stand. 8 hp, 435 w motor. X 7 tpifeaturesdesigned for wet or dry core drilling. The ck-kcy-2550-200f has a 5. Spline 1-1/4 in. For use on concrete, brick, stone, rock, ceramic, and fireproof materials. 1/4 -inch water valve for wet drilling. 4. 5-inch rolling wheels. Spline is 1-1/4 in. Reversible slide handle for dual-side operation. Cayken 10″ diamond core drill rig 5. Weight 34 lbs. Includes wrench set. Package includes wrench set, two (2) motor brushes, and 1/4-inch water valve with shut off. Angle/vertical position locks.

 

Bosch TC800 Concrete Screw Drill Bit Sleeve

Bosch TC800 Concrete Screw Drill Bit Sleeve

Bosch TC800 Concrete Screw Drill Bit Sleeve - Complete program including all sizes, the bit holder, the bit sleeve, and a complete anchoring system. Magnetic nut setters hold the screw in place, and keep the sleeve from being damaged, extending the life of the entire system. Bosch not only has a rich heritage in concrete, but is the largest manufacturer of concrete drill bits in the world. Bosch holds the tightest dimension to ensure low run out.

 

uxcell 32mm Cutting Diameter Diamond Coated Marble Granite Concrete Drill Bit Hole Saw

uxcell 32mm Cutting Diameter Diamond Coated Marble Granite Concrete Drill Bit Hole Saw

uxcell 32mm Cutting Diameter Diamond Coated Marble Granite Concrete Drill Bit Hole Saw - Shank size 10 x 25mm/04″ x 1”(dl) total length 83mm/327”. Total weight 115g features straight shank. Cutting diameter 32mm/126″ material metal,diamond particles. Color orange, silver tone. Package content 1 x marble hole saw product name marble hole saw.

 

17 PC CONCRETE DRILL BITS CHISEL SDS PLUS ROTARY HAMMER BITS WBMC

17 PC CONCRETE DRILL BITS & CHISEL SDS PLUS ROTARY HAMMER BITS W/BMC

17 PC CONCRETE DRILL BITS & CHISEL SDS PLUS ROTARY HAMMER BITS W/BMC - C2 tungsten carbide tipped hammer drill bits/chisel set for masonry concrete brick. This auction kit includes most commonly used sds bits for any of your hammer drills. Works with bosch, hilti & other sds or sds plus drills . Made of alloy steel with heat treated great quality sds bits ideal for all you masonry needs .

 

ITW BRANDS 11248 316x4-12-Inch Concrete Drill Bit

ITW BRANDS 11248 3/16×4-1/2-Inch Concrete Drill Bit

ITW BRANDS 11248 3/16×4-1/2-Inch Concrete Drill Bit - With its toughness and durability, it drills in harder concrete and produces fewer head snaps. The tapcon drill bit is a masonry drill bit with a carbide tip to ensure the precise drilling of pilot holes when installing anchors. Tapcon 3/16″ x 4-1/2″ concrete drill bit. . The drill bit is coated in climaseal to provide corrosion resistance.

 

Champion Cutting Tool TCB-316X3 Proline Tapcon Style Concrete Drill Bit

Champion Cutting Tool TCB-3/16X3 Proline Tapcon Style Concrete Drill Bit

Champion Cutting Tool TCB-3/16X3 Proline Tapcon Style Concrete Drill Bit - Bore through many different materials. Unique geometry. Made in germany. Carbide tipped. Multi-purpose cutting action.

 

Champion Proline CM95XB-12x16x18 SDS Plus ConcreteRebar Rotary Hammer Drill with Cross Head Solid Tip 5-Piece

Champion Proline CM95XB-1/2x16x18 SDS Plus Concrete/Rebar Rotary Hammer Drill with Cross Head Solid Tip, 5-Piece

Champion Proline CM95XB-1/2x16x18 SDS Plus Concrete/Rebar Rotary Hammer Drill with Cross Head Solid Tip, 5-Piece - Centering point for improved positioning and a reinforced core and special flute for maximum energy transfer. Made in germany. Provides a carbide 4-cutter head cutting faster and lasting longer. Cm95x sds plus rotary hammer drill has a dynamic tip geometry to enhance hole roundness and rebar cutting. Shortened conical shaped dust tracks for fast debris removal.

 

Tapcon Concrete Drill Bit

Tapcon Concrete Drill Bit

Tapcon Concrete Drill Bit - Straight shank. Made of chrome vanadium steel shank for enormous strength. Conforms to ansi standards. For use in hard hitting impact tools black oxide finish. Carbide tipped.

 

SDT 2 Wet Laser Welded Diamond Concrete Bit fits Hilti Milwaukee Core Drill Rigs 51MM

SDT 2″ Wet Laser Welded Diamond Concrete Bit fits Hilti® Milwaukee® Core Drill Rigs 51MM

SDT 2″ Wet Laser Welded Diamond Concrete Bit fits Hilti® Milwaukee® Core Drill Rigs 51MM - Diam. Wet drilling only. 393″)1 year warranty against manufacture defect. 951″ outer. Laser-welded diamond wet core bitsspindle thread 1 1/4″, 71. 719″ inner. , 1. Sdt 2″ wet laser welded diamond concrete bit fits hilti® milwaukee® core drill rigs 51mmuse for wet drilling on a full range of materials from reinforced concrete, asphalt, block, pavement, brick, etc. 25″ hextra tall 10mm segment height (. Diam. X 16.

 

Steel Dragon Tools 4 Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 4″ Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs

Steel Dragon Tools 4″ Wet Laser Welded Diamond Core Drill Concrete Bit fits Hilti Milwaukee Rigs - 671″ inner. Wet drilling only. Diam. 25″ hextra tall 10mm segment height (. Diam. Steel dragon tools® 4″ wet laser welded diamond core drill concrete bit fits hilti® milwaukee® rigsuse for wet drilling on a full range of materials from reinforced concrete, asphalt, block, pavement, brick, etc. 996″ outer. Laser-welded diamond wet core bitsspindle thread 1 1/4″, 73. , 3. X 16. 393″)1 year warranty against manufacture defect.

 

4 CONCRETE CORING DRILL 4 Z-1 CORE DRILL 2 SPEED by BLUEROCK Â TOOLS Z1 COMES WITH DURABLE CARRYING CASE  2 BITS UP TO 4

4″ CONCRETE CORING DRILL 4″ Z-1 CORE DRILL 2 SPEED by BLUEROCK ® TOOLS Z1 COMES WITH DURABLE CARRYING CASE + 2 BITS UP TO 4″

4″ CONCRETE CORING DRILL 4″ Z-1 CORE DRILL 2 SPEED by BLUEROCK ® TOOLS Z1 COMES WITH DURABLE CARRYING CASE + 2 BITS UP TO 4″ - Top gear is for smaller drill bits 1″-2″. This is a brand new 4″ portable coring drill. Let us know after the purchase which bits you would like. Bottom gear is for larger drill bits 2″-4″. Rated frequency 50-60hz. Automatic hold down switch for comfort. Rated input power 1500w. Adaptable water spigot for “wet” drilling. Arbor size is 1 1/4″ 7unc. Rated voltage 110v. This unit is designed to be an easy portable type drill for easy hand drilling. Dual speed 2100rpm/950rpm. Drill color is red. Structure and features two-gear rotary speed is designed for drilling different size holes. Bluerock block pictured is not included. It’s a high quality unit with a duel speed function. Also comes with 2 wet coring bits up to 4″. Specifications max drilling diameter 4″. The drill is fitted with a safety clutch. Level on side of the drill for precision drilling. Comes with a durable carrying case.

 

Hitachi 725642 12-Inch x 22-Inch x 24-Inch Straight Shank 4 Concrete Drill Bit

Hitachi 725642 1/2-Inch x 22-Inch x 24-Inch Straight Shank 4+ Concrete Drill Bit

Hitachi 725642 1/2-Inch x 22-Inch x 24-Inch Straight Shank 4+ Concrete Drill Bit - Cnc controlled manufacturing ensures 100% quality consistency. High tolerance milled shank provides perfect fit. High quality carbon hardened steel.

 

Cayken Handheld 65 Diamond Core Drill Rig 3HP 2300W Drill Reinforced Concrete or Brick 3 Gear Variable Speed 165MM

Cayken Handheld 6.5″ Diamond Core Drill Rig 3HP 2300W Drill Reinforced Concrete or Brick, 3 Gear Variable Speed 165MM

Cayken Handheld 6.5″ Diamond Core Drill Rig 3HP 2300W Drill Reinforced Concrete or Brick, 3 Gear Variable Speed 165MM - The ck-scy-26-3ebm has a variable-speed, 3 hp, 2,300 w motor with three (3) gears. 5 in. 5 in. Concrete drilling range 4 in. Spline is 1-1/4 in. Ce/rohs/iso90001 certified. Drill features safety clutch and overload protection. Drill bit not included. Concrete drilling range is 4 in. Featuresdesigned for wet or dry core drilling. Will cut up to 6. Package includes carrying case, wrench, two (2) motor brushes, and 1/4-inch water valve with shut off. 5″ diamond core drill rig 3hp 2300w drill reinforced concrete or brick, 3 gear variable speed 165mmthe cayken ck-scy-26-3ebm is designed for wet or dry core drilling. Cayken handheld 6. This drill will cut up to 6. 5 in. Brick drilling range is 6. Soft start electronic current limiterincludes carrying case and wrench. X 7 tpiweight 18 lbs. Spline 1-1/4 in. Diameter holes. For use on concrete, brick, stone, rock, ceramic, and fireproof materials. Motor specs 3 hp, 110 v, 60 hz, 2,300 w, variable speed with three (3) gears (400-850 rpm, 750-1,650 rpm and 1,200-2,650 rpm). X 7 tpi. Specificationsbrick drilling range 6. 5-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. 1/4-inch water valve for wet drilling. Stepless speed regulation.