15 Best Er40 Collets in 2020

 

Techniks CAPTO C6 x ER40 Collet Chuck x 65mm Length #ad

Techniks CAPTO C6 x ER40 Collet Chuck x 65mm Length

Techniks CAPTO C6 x ER40 Collet Chuck x 65mm Length #ad - Tir 00001″ or better. Balanced to 25,000 rpm at g25. Fully compatible with all c6 capto tooling. For use with er40 collets, 65mm projection length. Our part # tec-14312240065.

 

Techniks HSK63A ER40 Collet Chuck x 120mm Length #ad

Techniks HSK63A ER40 Collet Chuck x 120mm Length

Techniks HSK63A ER40 Collet Chuck x 120mm Length #ad - Our part # tec-31472. 120mm gage length, slotted nut (included). 00001″ runout from taper to pocket. Taper ground to at3 standard. Balanced to 25,000 rpm at g25.

 

Techniks CAT50 ER40 Collet Chuck x 6 Gage Length #ad

Techniks CAT50 ER40 Collet Chuck x 6″ Gage Length

Techniks CAT50 ER40 Collet Chuck x 6″ Gage Length #ad - Our part # tec-22325. Balanced to 25,000 rpm at g25. Taper ground to at3 standard. 00001″ runout from taper to pocket. 6″ gage length, slotted nut (included).

 

MT5 ER40 Collet Chuck Tool Holder Set 23 Pcs ER40 Collets Holder #ad

MT5 ER40 Collet Chuck Tool Holder Set 23 Pcs ER40 Collets Holder

MT5 ER40 Collet Chuck Tool Holder Set 23 Pcs ER40 Collets Holder #ad - Alloy steel and hardened to hrc 60-62 tested tir 00001″. Back bar thread m20 x 25p. 1 5mt collets holder, 23 pcs er 40collets, 1 wrench. Collets size 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 15/32, 1/2, 9/16, 19/32, 5/8, 11/16, 23/32, 3/4, 13/16, 27/32, 7/8, 29/32, 1 inch. Taper morse taper 5, mt5.

 

Techniks CAT50 ER40 Collet Chuck x 4 Gage Length #ad

Techniks CAT50 ER40 Collet Chuck x 4″ Gage Length

Techniks CAT50 ER40 Collet Chuck x 4″ Gage Length #ad - 00001″ runout from taper to pocket. 4″ gage length, slotted nut (included). Taper ground to at3 standard. Our part # tec-22321. Balanced to 25,000 rpm at g25.

 

ER40 Collet Chuck Wrench #ad

ER40 Collet Chuck Wrench

ER40 Collet Chuck Wrench #ad - D is 63mm. Er40 collet chuck wrench. L is 255mm.

 

Techniks BT40 ER40 Collet Chuck x 150mm Length #ad

Techniks BT40 ER40 Collet Chuck x 150mm Length

Techniks BT40 ER40 Collet Chuck x 150mm Length #ad - Taper ground to at3 standard. Balanced to 25,000 rpm at g25. 150mm gage length, slotted nut (included). Our part # tec-16189. 00001″ runout from taper to pocket.

 

Techniks BT40 ER40 Collet Chuck x 80mm Length #ad

Techniks BT40 ER40 Collet Chuck x 80mm Length

Techniks BT40 ER40 Collet Chuck x 80mm Length #ad - Balanced to 25,000 rpm at g25. Taper ground to at3 standard. Our part # tec-16183. 80mm gage length, slotted nut (included). 00001″ runout from taper to pocket.

 

Techniks BT50 ER40 Collet Chuck x 135mm Length #ad

Techniks BT50 ER40 Collet Chuck x 135mm Length

Techniks BT50 ER40 Collet Chuck x 135mm Length #ad - Balanced to 25,000 rpm at g25. Taper ground to at3 standard. Our part # tec-16289. 135mm gage length, slotted nut (included). 00001″ runout from taper to pocket.

 

Techniks CAT50 ER40 Collet Chuck x 8 Gage Length #ad

Techniks CAT50 ER40 Collet Chuck x 8″ Gage Length

Techniks CAT50 ER40 Collet Chuck x 8″ Gage Length #ad - 8″ gage length, slotted nut (included). 00001″ runout from taper to pocket. Our part # tec-22327. Taper ground to at3 standard. Balanced to 25,000 rpm at g25.

 

TECHNIKS 22261F CAT40 ER40 COLLET CHUCK COOLANT-THRU SPINDLEFLANGE 315 LENGTH #ad

TECHNIKS 22261F CAT40 ER40 COLLET CHUCK COOLANT-THRU SPINDLE/FLANGE 3.15″ LENGTH

TECHNIKS 22261F CAT40 ER40 COLLET CHUCK COOLANT-THRU SPINDLE/FLANGE 3.15″ LENGTH #ad - Our part # tec-22261f. Dimensions for length (l1)315″ and diameter (d) 248″. Coolant-thru spindle or thru flange (din b). Balanced to 25,000 rpm at g25. Coolflex holers are factory set for coolant-thru spindle simply remove 2 stop screws for din b coolant-thru flange simply remove 2 stop screws for din b coolant-thru flange.

 

Techniks ER40 Collet Type400 Gage LengthCAT40 Toolholder With Powder-Coat Collet Nuts #ad

Techniks ER40 Collet Type,4.00″ Gage Length,CAT40 Toolholder With Powder-Coat Collet Nuts

Techniks ER40 Collet Type,4.00″ Gage Length,CAT40 Toolholder With Powder-Coat Collet Nuts #ad - Techniks er40 collet type,400″ gage length,cat40 toolholder with. Balanced to 25,000 rpm at g25. Our part # tec-16189. Taper ground to at3 standard. 150mm gage length, slotted nut (included).

 

TECHNIKS 240 MM SUPER PRECISION ER40 COLLET 0002 ACCURACY METRIC CHUCK #ad

TECHNIKS 24.0 MM SUPER PRECISION ER40 COLLET .0002 ACCURACY METRIC CHUCK

TECHNIKS 24.0 MM SUPER PRECISION ER40 COLLET .0002 ACCURACY METRIC CHUCK #ad - Clamping range 906-945″. Our part # tec-04240-24. Precision ground and hand inspected only the very best materials and grinding techniques used. The most accurate er40 collet in the industry- average 00002″ total indicated runout (tir).

 

Lyndex 040-SPAN Spanner Wrench for ER40 Collet Chuck Nut #ad

Lyndex 040-SPAN Spanner Wrench for ER40 Collet Chuck Nut

Lyndex 040-SPAN Spanner Wrench for ER40 Collet Chuck Nut #ad - Made out of black oxide coated steel for strength and durability. Lyndex-nikken spanner wrenches are designed to firmly grasp the collet chuck nut for proper assembly/disassembly. .

 

CAT40 ER40 Collet Chucks 4 Pcs w Projection 315-4-6 Balanced G25 20000RPM #ad

CAT40 ER40 Collet Chucks 4 Pcs w Projection 3.15″-4″-6″ Balanced G2.5 @20,000RPM

CAT40 ER40 Collet Chucks 4 Pcs w Projection 3.15″-4″-6″ Balanced G2.5 @20,000RPM #ad - Balanced to g25 @20,000 rpm tested tir 00001″. Package includes 1pc cat40 er40 collet chucks with projection 315″ 2pc cat40 er40 collet chucks with projection 4″, and 1 pc cat40 er 40 collet chuck with projection 6″. Made of prime quality alloy steel and hardened to hrc 60-62.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.