Huot Combination Three-Drawer Tap, Drill Bit, and Die Dispenser Cabinet for Metric Sizes
- Three-drawer cabinet holds multiple taps, drill bits, and dies in a variety of metric sizes. Label holders for identification. Made in usa. Unit can be stacked with other huot dispenser cabinets. Made of steel with an epoxy finish for durability and protection.
Chicago Latrobe HT18T High-Speed Steel Jobber Length Drill Bit and Hand Tap Set with Metal Case, TiN Coated, 18-Piece, Wire Size, Letter, Inch, UNC #6-32 to 1/2″-13 plus #10-32 UNF Tap Sizes
- Set contains 9 plug-chamfer hand taps, including thread sizes 6-32 unc, 8-32 unc, 10-24 unc, 10-32 unf, 1/4″-20 unc, 5/16″-18 unc, 3/8″-16 unc, 7/16″-14 unc, and 1/2″-13 unc. 118-degree conventional point on the drill bits for a range of drilling applications. Set contains 9 jobber length drill bits, including wire gauge sizes #36, #29, #25, #21, and #7 letter sizes f and u and inch sizes 5/16″ and 27/64″. Titanium nitride (tin) coating offers high hardness for increased wear resistance and extended tool life compared to an uncoated drill bit on ferrous and nonmetallic materials. High-speed steel (hss) provides hardness for wear resistance.
Irwin Tools 21201- T-Handle Ratcheting Tap Wrench For Tap Sizes No. 0 to 1/4″ – Carded
- Overall product weight -0. Overall width, side to side -3. 0 to 1/4″ (3mm to 6mm). -For taps no. Han21201 features -three position gear box for quick, efficient ratcheting action. Overall depth, front to back -5. -ideal for hard-to-reach areas. 4 inches. 45 pounds. -Knurled nut for tightening. 9 inches. 5 inches. Dimensions overall height, top to bottom -0.
Morris Products 13356 Bi-Metal Hole Saw, 2″ Saw Diameter, Pipe Tap Size, 1-1/2″ Pipe Entrance Size, Used with 13460-13470 Arbor Size
- Variable pitch design (4-6 teeth/inch) reduces labor & tool costs by cutting 45% faster & lasting longer than straight 6 pitch saws. Bi-metal hole saws, a great bi-metal hole saw for any situation. Bi-metal hole saws combine the toughness & shock resistance of an alloy with the cutting ability of high speed steel. Better chip clearance, less heat build-up, lower feed pressure & smooth cuts. M42 bi-metal hole saw for use in most materials wood, plastic, aluminum, brass, cast iron, & stainless steel.
Union Butterfield 1528(UNC) High-Speed Steel Hand Tap, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, 3 Flute, H2 Tolerance, #3-48 Thread Size
- High-speed steel is compatible with a variety of materials. Available in unc (unified coarse), unf (unified fine) or uns (unified special) right-hand thread options for different applications. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Uncoated (bright) tools have no additional surface treatment or coating, for use on a broad range of materials. Machine-screw tap sizes, in frequent demand for many industries and products.
HSS 3 Flute Spiral Point Tap Size: 14 x 1.5
- Generic dimensions -product weight 1. -material high speed steel. 5 size 14 x 1. 3 lbs. Dwtg14x1. 5 features -spiral point tap. -Number of flutes 3.
Morris Products 13396 Bi-Metal Hole Saw, 4-1/8″ Saw Diameter, Pipe Tap Size, 3-1/2″ Pipe Entrance Size, Used with 13460-13470 Arbor Size
- Bi-metal hole saws, a great bi-metal hole saw for any situation. Bi-metal hole saws combine the toughness & shock resistance of an alloy with the cutting ability of high speed steel. Better chip clearance, less heat build-up, lower feed pressure & smooth cuts. M42 bi-metal hole saw for use in most materials wood, plastic, aluminum, brass, cast iron, & stainless steel. Variable pitch design (4-6 teeth/inch) reduces labor & tool costs by cutting 45% faster & lasting longer than straight 6 pitch saws.
QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 3/8″ LS)
- When paired with quick change holders, these greatly reduce change-over time. Equivalent to collis # 78917 us shop tools # bz10-037p command # xtc1-0375 techniks # 19/11-4095. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications.
Huot Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm
- Meets iso 529 1975 standards. Made in usa. Labeled storage holes for identification and organization. Index holds 18 taps and drill bits in metric tap sizes 25 mm x 045 mm to 12 mm x 175 mm and drill bit sizes 205 mm to 102 mm. Made of steel with an epoxy finish and has a snap-lock cover for durability and protection.
Chicago Latrobe HT18 High-Speed Steel Jobber Length Drill Bit and Hand Tap Set with Metal Case, Uncoated (Bright) Finish, Wire Size, Letter, Inch, 18-Piece, #6-32 to 1/2″-13 Tap Sizes
- Set contains 9 jobber length drill bits, including wire gauge sizes #36, #29, #25, #21, and #7 letter sizes f and u and inch sizes 5/16″ and 27/64″. High-speed steel (hss) provides hardness for wear resistance. Uncoated (bright) finish provides an untreated surface. Set contains 9 plug-chamfer hand taps, including thread sizes 6-32 unc, 8-32 unc, 10-24 unc, 10-32 unf, 1/4″-20 unc, 5/16″-18 unc, 3/8″-16 unc, 7/16″-14 unc, and 1/2″-13 unc. 118-degree conventional point on the drill bit for a range of drilling applications.
Starrett 93D T-Handle Tap Wrench, 1/16″ – 3/16″ Tap Size, 1/16″ – 5/32″ Square Shank Diameter, 6″ Body Length
- Wrench have a sliding handle that is frictionally held, the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. The jaws conform to the tool being held, making it rigid and less apt to loosen. The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight. Starrett no 93 t-handle tap wrench is for holding taps, drills, reamers and other small tools to be turned by hand, it is properly heat treated to withstand ordinary shop use. It is identical in construction.
Irwin Tools 21101- T-Handle Ratcheting Tap Wrench For Tap Sizes No. 0 to 1/4″ – Bulk
- Three position gear box for quick, efficient ratcheting action. Designed for use with taps, reamers, screw extractors and other tools with a square shank.
Chicago Latrobe HM18 High-Speed Steel Jobber Length Drill Bit and Tap Set with Metal Case, Black Oxide Drill Bits/Uncoated Taps, Metric, 18-piece, Metric Drill Bit Sizes, M2.5 to M12 Tap Sizes
- Set contains 9 plug-chamfer hand taps, including thread sizes m25 x 045, m3 x 05, m35 x 06, m4 x 07, m5 x 08, m6 x 1, m8 x 125, m10 x 15, and m12 x 175. Black oxide finish on drill bits reduces wear while promoting chip and coolant flow on ferrous materials, and the uncoated (bright) finish on hand taps provides an untreated surface that can be used on a range of materials, especially soft metals. 118-degree conventional point on the drill bit for a range of drilling applications. High-speed steel (hss) provides hardness for wear resistance. Set contains 9 jobber length drill bits, including metric sizes 205, 25, 29, 33, 42, 50, 67, 85, and 102 mm.
Chicago Latrobe HT36 High-Speed Steel Jobber Length Drill Bit and Hand Tap Set with Metal Case, Uncoated (Bright) Finish, UNC/UNF, 36-piece, Wire Size, Letter, Inch, #6-32 to 1/2″-20 Tap Sizes
- 118-degree conventional point on the drill bit for a range of drilling applications. Set contains 18 plug-chamfer hand taps, including thread sizes 6-32 unc, 6-40 unf, 8-32 unc, 8-36 unf, 10-24 unc, 10-32 unf, 12-24 unc, 12-28 unf, 1/4″-20 unc, 1/4″-28 unf, 5/16″-18 unc, 5/16″-24 unf, 3/8″-16 unc, 3/8″-24 unf, 7/16″-14 unc, 7/16″-20 unf, 1/2″-13 unc, and 1/2″-20 unf. High-speed steel (hss) provides hardness for wear resistance. Uncoated (bright) finish provides an untreated surface. Set contains 18 jobber length drill bits, including wire gauge sizes #36, #33, #29 (two pieces), #25, #21, #16, #15, #7, and #3 letter sizes f, i, q, and u and inch sizes 5/16″, 25/64″, 27/64″, and 39/64″.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
